太阳发电机理论研究进展     

姜杰  汪景琇 《天文学进展》2005,23(2):121-134

太阳发电机理论主要解释太阳磁场的起源和演化，是太阳物理中最基本、最重要的问题之一．对它的研究不仅具有重要的科学价值，而且对空间天气的预测和空间技术的发展有一定的影响．随着日震学的发展，该理论也得到了很大改进。从相关观测入手，综述了发电机理论需解释的观测事实，以及为发电机理论提供约束的太阳内部动力学结构；介绍了基本理论和近来的主流模型，并指出尚待解决的问题和进一步的努力方向。  相似文献   

黑子磁流体静力学的一个模型     

刘庆忠  宋慕陶 《天文学报》1996,37(1):35-42

本文对Ｏｓｈｅｒｏｖｉｃｈ的黑子返回磁通量模型作了适当的修改，使用黑子中心作为边界条件，用五种观测结果，导出了理论模型所需的五个主要参量，用半经验方法求得了黑子静力学模型的磁场、压力和温度等物理量．将此模型应用于一个中等大小的圆形对称黑子，可得到一个特解，结果发现我们的模型既能满足黑子的磁性质，同时又能满足合理的热力学量分布．  相似文献   

MATLAB在运用系统建模处理南海气象数据过程中应用     

董言治  周晓东  娄树理  陈永刚  沈同圣 《成都信息工程学院学报》2004,19(1):76-81

介绍了MATLAB语言特点和系统建模方法的基本理论.根据南海气象数据的实际建模处理过程,给出了建模的详细步骤及其MATLAB实现过程以及MATLABTM的主要实现程序.试验讨论和结果表明利用MATLAB语言可以方便地对南海气象数据用系统建模方法进行建模和处理,MATLAB在运用系统建模法处理南海气象数据方面具有明显的优越性.  相似文献   

Application of micropolar plasticity to post failure analysis in geomechanics     

Majid T. Manzari 《国际地质力学数值与分析法杂志》2004,28(10):1011-1032

A micropolar elastoplastic model for soils is formulated and a series of finite element analyses are employed to demonstrate the use of a micropolar continuum in overcoming the numerical difficulties encountered in application of finite element method in standard Cauchy–Boltzmann continuum. Three examples of failure analysis involving a deep excavation, shallow foundation, and a retaining wall are presented. In all these cases, it is observed that the length scale introduced in the polar continuum regularizes the incremental boundary value problem and allows the numerical simulation to be continued until a clear collapse mechanism is achieved. The issue of grain size effect is also discussed. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

基于噪声随机模型的加权观测融合方法     

黄贤源  隋立芬  范玉茹 《测绘学院学报》2009,(1)

信息融合技术中,在各局部传感器的有色观测噪声为一阶AR模型的情况下,可以利用观测扩增方法消除有色噪声的影响,得到最优加权观测融合方程,从而实现状态的最优滤波解。对于有色观测噪声为MA或ARMA模型的情况,观测扩增方法不再适用。提出了基于有色观测噪声随机模型级数展开的方法,求解出各局部传感器有色观测噪声的方差,并利用该方差对加权观测融合滤波器进行了构造。通过计算实例证明,该方法不仅适用于观测噪声为AR模型,同时适用于噪声MA或ARMA模型。  相似文献   

Calibrating the GOCE accelerations with star sensor data and a global gravity field model   总被引：1，自引：0，他引：1  

Sietse Rispens  Johannes Bouman 《Journal of Geodesy》2009,83(8):737-749

A reliable and accurate gradiometer calibration is essential for the scientific return of the gravity field and steady-state ocean circulation explorer (GOCE) mission. This paper describes a new method for external calibration of the GOCE gradiometer accelerations. A global gravity field model in combination with star sensor quaternions is used to compute reference differential accelerations, which may be used to estimate various combinations of gradiometer scale factors, internal gradiometer misalignments and misalignments between star sensor and gradiometer. In many aspects, the new method is complementary to the GOCE in-flight calibration. In contrast to the in-flight calibration, which requires a satellite-shaking phase, the new method uses data from the nominal measurement phases. The results of a simulation study show that gradiometer scale factors can be estimated on a weekly basis with accuracies better than 2 × 10⁻³ for the ultrasensitive and 10⁻² for the less sensitive axes, which is compatible with the requirements of the gravity gradient error. Based on a 58-day data set, scale factors are found that can reduce the errors of the in-flight-calibrated measurements. The elements of the complete inverse calibration matrix, representing both the internal gradiometer misalignments and scale factors, can be estimated with accuracies in general better than 10⁻³.  相似文献   

Isotope hydrological study of mean transit time in the granitic Strengbach catchment (Vosges massif,France): application of the FlowPC model with modified input function     

D. Viville  B. Ladouche  T. Bariac 《水文研究》2006,20(8):1737-1751

Measurements of ¹⁸O concentrations in precipitation, soil solution, spring and runoff are used to determine water transit time in the small granitic Strengbach catchment (0·8 km²; 883–1146 m above sea level) located in the Vosges Mountains of northeastern France. Water transit times were calculated by applying the exponential, exponential piston and dispersion models of the FlowPC program to isotopic input (rainfall) and output (spring and stream water) data sets during the period 1989–95. The input function of the model was modified compared with the former version of the model and estimated by a deterministic approach based on a simplified hydrological balance. The fit between observed and calculated output data showed marked improvements compared with results obtained using the initial version of the model. An exponential piston version of the model applied to spring water indicates a 38·5 month mean transit time, which suggests that the volume in the aquifer, expressed in water depth, is 2·4 m. A considerable thickness (>45 m) of fractured bedrock may be involved for such a volume of water to be stored in the aquifer. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

利用自回归模型检测地球极移重力效应     

杨学峰  孙和平  徐建桥 《大地测量与地球动力学》2004,24(2):110-114

同时采用4个台站的国际超导重力仪长期连续重力观测资料和国际地球自转服务中心提供的同步地球自转参数，研究了极移引起的地球重力场变化特征。利用自回归模型估计了各序列的功率谱密度和积谱密度，结果表明极移导致的重力效应的主要能量集中在Chandler摆动和周年项附近，叠积后实际重力观测与极移重力信号理论值之间的差异分别为0．4％和3．9％，说明超导重力仪可有效监测极移导致的重力变化。  相似文献   

空间数据仓库的认知过程   总被引：3，自引：3，他引：0  

吴金华  祝国瑞 《地球科学与环境学报》2004,26(4):67-70

从理论上探讨了空间数据仓库的认知过程．主要是十一个层次的世界模型通过十个算子转换的过程，对十一个层次世界及十个算子概念进行了较详细地讨论，并用代数系统对其进行了定义。  相似文献   

A critical state model for sands dependent on stress and density     

Y.P. Yao  D.A. Sun  T. Luo 《国际地质力学数值与分析法杂志》2004,28(4):323-337

An elastoplastic model for sands is presented in this paper, which can describe stress–strain behaviour dependent on mean effective stress level and void ratio. The main features of the proposed model are: (a) a new state parameter, which is dependent on the initial void ratio and initial mean stress, is proposed and applied to the yield function in order to predict the plastic deformation for very loose sands; and (b) another new state parameter, which is used to determine the peak strength and describe the critical state behaviour of sands during shearing, is proposed in order to predict simply negative/positive dilatancy and the hardening/softening behaviour of medium or dense sands. In addition, the proposed model can also predict the stress–strain behaviour of sands under three-dimensional stress conditions by using a transformed stress tensor instead of ordinary stress tensor. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献