Mineralogy and geochemistry of a Late Permian coal in the Dafang Coalfield, Guizhou, China: influence from siliceous and iron-rich calcic hydrothermal fluids   总被引：16，自引：2，他引：16  

Shifeng Dai  Chen-Lin Chou  Mei Yue  Kunli Luo  Deyi Ren   《International Journal of Coal Geology》2005,61(3-4):241-258

This paper describes the influence of siliceous and iron-rich calcic low-temperature hydrothermal fluids (LTHF) on the mineralogy and geochemistry of the Late Permian No. 11 Coal (anthracitic, R_r=2.85%) in the Dafang Coalfield in northwestern Guizhou Province, China. The No. 11 Coal has high contents of vein ankerite (10.2 vol.%) and vein quartz (11.4 vol.%), with formation temperatures of 85 and 180 °C, respectively, indicating that vein ankerite and vein quartz were derived from low-temperature calcic and siliceous hydrothermal fluids in two epigenetic episodes. The vein quartz appears to have formed earlier than vein ankerite did, and at least three distinct stages of ankerite formation with different Ca/Sr and Fe/Mn ratios were observed.The two types of mineral veins are sources of different suites of major and trace metals. Scanning electron microscope and sequential extraction studies show that, in addition to Fe, Mg, and Ca, vein ankerite is the dominant source of Mn, Cu, Ni, Pb, and Zn in the coal, and the contents of these five elements are as high as 0.09% and 74.0, 33.6, 185, and 289 μg/g, respectively. In contrast, vein quartz is the main carrier mineral for platinum-group elements (PGEs) Pd, Pt, and Ir in the coal, and the contents of Pd, Pt, and Ir are 1.57, 0.15, and 0.007 μg/g, respectively. Sequential extraction showed a high PGE content in the silicate fraction, up to 10.4 μg/g Pd, 1.23 μg/g Pt, and 0.05 μg/g Ir, respectively. It is concluded that the formation of ankerite and quartz and the anomalous enrichment of trace elements in the No. 11 Coal in the Dafang Coalfield, Guizhou, result from the influx of calcic and siliceous low-temperature hydrothermal fluids.  相似文献   

9: Processes of tectonism, magmatism and mineralization: Lessons from Europe     

Derek Blundell  Nicholas Arndt  Peter R. Cobbold  Christoph Heinrich 《Ore Geology Reviews》2005,27(1-4):333

Metallogenic provinces in Europe range in age from the Archaean to the Neogene. Deposit types include porphyry copper and epithermal Cu–Au, volcanic-hosted massive sulphide (VMS), orogenic gold, Fe-oxide–Cu–Au, anorthosite Fe–Ti-oxide and sediment-hosted base-metal deposits. Most of them formed during short-lived magmatic events in a wide range of tectonic settings; many can be related to specific tectonic processes such as subduction, hinge retreat, accretion of island arcs, continental collision, lithosphere delamination or slab tear. In contrast, most sediment-hosted deposits in Europe evolved in extensional, continental settings over significant periods of time. In Europe, as elsewhere, ore formation is an integral part of the geodynamic evolution of the Earth's crust and mantle. Many tectonic settings create conditions conducive to the generation of water-rich magma, but the generation of ore deposits appears to be restricted to locations and short periods of change in temperature and stress, imposed by transitory plate motions. Crustal influence is evident in the strong structural controls on the location and morphology of many ore deposits in Europe. Crustal-scale fault–fracture systems, many involving strike-slip elements, have provided the fabric for major plumbing systems. Rapid uplift, as in metamorphic core complexes, and hydraulic fracturing can generate or focus magmatic–hydrothermal fluid flow that may be active for time spans significantly less than a million years. Once a hydrologically stable flow is established, ore formation is strongly dependent on the steep temperature and pressure gradients experienced by the fluid, particularly within the upper crust. In Europe, significant fracture porosity deep in the crystalline basement (1%) is not only important for magmatic–hydrothermal systems, but allows brines to circulate down through sedimentary basins and then episodically upward, expelled seismically to produce sediment-hosted base-metal deposits and Kupferschiefer copper deposits. Emerging research, stimulated by GEODE, can improve the predicting power of numerical simulations of ore-forming processes and help discover the presence of orebodies beneath barren overburden.  相似文献   

Lead-arsenic soil geochemical study as an exploration guide over the Killik volcanogenic massive sulfide deposit, Northeastern Turkey   总被引：3，自引：0，他引：3  

E. ifti  H. Kolayli  S.Tokel 《Journal of Geochemical Exploration》2005,86(1):49-59

A mountainous terrain, the eastern Pontide tectonic belt, located in northeastern Turkey, contains more than 60 known volcanogenic massive sulfide (VMS) deposits that differ in reserves (0.1–30 million tonnes) and grades. Soil geochemistry is conventionally used in exploration programs to discover concealed VMS deposits in the region. In the present study, Pb and As element pair were used as pathfinder elements to investigate the relationship of their anomalies to a completely delineated ore deposit (Killik VMS deposit) in an orientation survey that served as a natural physical model. Two hundred forty soil samples were analyzed in the present study. The two elements, which represent the opposite ends of the mobility range, revealed high contrast and overlapped each other at the location of the ore deposit due to enhancement of the anomalies by hydromorphic dispersion, which is an indication that soil samples would produce reliable results. The successful delineation of the deposit is remarkable considering the rough topography and the climatic limitations. Previously the extremely moist and temperate climate was thought to cause excessive leaching of the trace element pathfinders from the ore deposits to produce extensive anomalies usually extending away from the mineralization thus, leading to erroneous results and/or extensive anomalous areas. But the present research has shown that the method can be used effectively if the sampling and data evaluation is carefully conducted.  相似文献   

Age, distribution, tectonics, and eustatic controls of the Paranense and Caribbean marine transgressions in southern Bolivia and Argentina     

R.M. Hernndez  T.E. Jordan  A. Dalenz Farjat  L. Echavarría  B.D. Idleman  J.H. Reynolds 《Journal of South American Earth Sciences》2005,19(4):495-512

Marine transgression onto the South American continent took place at least twice in the Miocene along distinct paleogeographic corridors. The first event occurred between 15 and 13 Ma and the second between 10 and 5? Ma. Each event has particular dominant variables (tectonism, eustacy, sediment accumulation rate) that permitted the preservation of the record and development of the sea on the continent. The 15–13 Ma transgression was tectonically and eustatically controlled, flooding older sedimentary accommodation zones on the South American plate during a global high sea level, whereas the 105? Ma event was predominantly tectonically controlled, generated by tectonic loading created in the Cordillera Oriental fold-and-thrust belt. A new 7.72±0.31 Ma ⁴⁰Ar/³⁹Ar date from the Río Parapetí in Bolivia suggests that the 15–13 Ma transgression registered in Argentina produced no continental connection to the Caribbean transgression, registered in Bolivia, because of temporal constraints.  相似文献   

Metamorphic evolution of the Maud Belt: P–T–t path for high-grade gneisses in Gjelsvikfjella, Dronning Maud Land, East Antarctica     

Avinash Bisnath  Hartwig E. Frimmel 《Journal of African Earth Sciences》2005,43(5):505-524

A metamorphic petrological study, in conjunction with recent precise geochronometric data, revealed a complex P–T–t path for high-grade gneisses in a hitherto poorly understood sector of the Mesoproterozoic Maud Belt in East Antarctica. The Maud Belt is an extensive high-grade, polydeformed, metamorphic belt, which records two significant tectono-thermal episodes, once towards the end of the Mesoproterozoic and again towards the late Neoproterozoic/Cambrian. In contrast to previous models, most of the metamorphic mineral assemblages are related to a Pan-African tectono-thermal overprint, with only very few relics of late Mesoproterozoic granulite-facies mineral assemblages (M₁) left in strain-protected domains. Petrological and mineral chemical evidence indicates a clockwise P–T–t path for the Pan-African orogeny. Peak metamorphic (M_2b) conditions recorded by most rocks in the area (T = 709–785 °C and P = 7.0–9.5 kbar) during the Pan-African orogeny were attained subsequent to decompression from probably eclogite-facies metamorphic conditions (M_2a).The new data acquired in this study, together with recent geochronological and geochemical data, permit the development of a geodynamic model for the Maud Belt that involves volcanic arc formation during the late Mesoproterozoic followed by extension at 1100 Ma and subsequent high-grade tectono-thermal reworking once during continent–continent collision at the end of the Mesoproterozoic (M₁; 1090–1030 Ma) and again during the Pan-African orogeny (M_2a, M_2b) between 565 and 530 Ma. Post-peak metamorphic K-metasomatism under amphibolite-facies conditions (M_2c) followed and is ascribed to post-orogenic bimodal magmatism between 500 and 480 Ma.  相似文献   

Kinematic analysis of sinistral cataclastic shear zones along the northern margin of the Mino Belt, central Japan   总被引：1，自引：0，他引：1  

Masakazu Niwa  Kazuhiro Tsukada  Shiro Tanaka 《Journal of Asian Earth Sciences》2005,24(6):787

In this paper, cataclastic shear zones along the northern margin of the Mino Belt, central Japan are described, and the significance of the shearing in the tectonic evolution of SW Japan is examined. The Mino Belt in SW Japan is composed of accretionary complexes of Jurassic to Early Cretaceous age. Field investigation revealed that remarkable cataclastic shear zones trending east to northeast run along the northern margin of the Mino Belt. Closely spaced cleavage is developed in these shear zones. Lineation on the cleavage plunges at shallow to moderate angles. Deformation structures (e.g. composite planar fabric and asymmetric structure of clasts) in the sheared rocks clearly indicate a sinistral sense of shear. The shearing ceased by latest Cretaceous time, because the sheared rocks are overlain by unsheared Upper Cretaceous volcanic rocks. The sinistral shearing may be closely related to Cretaceous sinistral movement along the eastern margin of Asia. Sinistral shearing along the northern margin of the Mino Belt can be considered as a key for re-examining the tectonic development of SW Japan.  相似文献   

CGD-1型大口径全套管冲击抓斗的设计和应用          下载免费PDF全文

冯起赠  宋志彬  王年友 《探矿工程》2005,32(6):38-40

CGD－1型大口径全套管冲击抓斗主要是配套全套管钻机施工而研制的。该抓斗主要适用于复杂地层的施工。介绍了该抓斗的技术参数、性能特点、主要结构及试验情况。  相似文献   

岩土钻掘设备的液压步履机构          下载免费PDF全文

王世玉  薛军 《探矿工程》2005,32(6):41-43

因液压步履移位最方便，辅助时间短，换向灵活，移位对孔准确，大型岩土钻掘设备施工的群孔现场实现近距离的自行迁移多采用液压步履机构。详细叙述了双向移动和单向移动加转向步履机构的结构和特点。  相似文献   

浅埋暗挖技术在南平市天台隧道工程施工中的应用          下载免费PDF全文

李耀卿 《探矿工程》2005,32(12):56-58

主要介绍了在Ⅱ、Ⅲ类围岩中施工城市浅埋隧道的施工技术，以“短开挖、快封闭、强支护、勤量测”为指导，将隧道分成上、下两个台阶进行开挖，及时进行初期支护，保证施工始终处于安全状态。  相似文献   

厦门市海沧区北市花岗岩矿滑坡形成机制及治理设计     

王广和张海生  王慧珍 《中国地质灾害与防治学报》2005,16(B12):41-45

厦门市海沧区北市花岗岩矿滑坡发生于2004年10月30日14时。滑坡位于呆场的西端帮顶部的第四系填土和淤泥质土层中，滑体将该区域原设的抗滑桩剪断、拔出、推移，土石迅速越过矿区运输公路，塌落到采场工作面，将正在作业的2名工人和生产设备掩埋。滑坡宽度约60m，最大垂直厚度约14m，总体积约13000m^3。由于滑坡对原有防护体系的破坏，根据滑体调查和极限平衡计算结果，滑坡处于不稳定状态，直接威胁着整个采场设备和未来生产的安全。必须对北市花岗岩矿滑坡进行专项治理。滑坡宜采用治水、削坡减载和支挡相结合的综合治理措施。  相似文献