人工示踪方法评价地下水入渗补给及其优先流程度——以河北栾城和衡水为例   总被引：1，自引：0，他引：1  

吴庆华  张薇  蔺文静  张发旺  王贵玲 《地球学报》2014,35(4):495-502

利用传统人工示踪剂峰值方法评价地下水入渗补给存在精度低和适用性差等缺点。为此,本文提出了多区模型方法,采用保守型示踪剂溴和氚对河北栾城和衡水地区进行了不同土地利用方式和不同深度下地下水入渗补给评价。结果表明,栾城和衡水地区地下水入渗补给量分别为124.3 mm/a和13.7 mm/a,与传统方法(103.3 mm/a和0.0 mm/a)相比,多区模型方法的评价结果更符合实际。同时对由优先流引起的地下水入渗补给量进行了分析,栾城和衡水地区优先流程度分别为28.7%和2.3%。秸秆覆盖抑制降雨或灌溉水入渗补给地下水,降低优先流程度,而植被覆盖有利于土壤水优先流的形成。地下水入渗补给量及其优先流程度与示踪深度均无明显相关性,且受土壤结构控制。  相似文献   

北京山区泥石流灾害预警方法研究   总被引：1，自引：0，他引：1  

赵忠海 《地质灾害与环境保护》2014,25(4):14-19

北京山区泥石流灾害较为频繁,总体以暴雨型沟谷泥石流为主,受地形、地貌、地质、降雨以及松散物类型等因素的影响比较明显。在调查分析北京山区泥石流灾害发育特征的基础上,从泥石流的形成和启动条件入手,对泥石流灾害的预警方法进行研究与探讨。  相似文献   

南平市红星滑坡泥石流特征及成因     

黄国平  柳侃  叶龙珍 《地质灾害与环境保护》2014,25(4):20-25

该滑坡泥石流特征为,流域面积小,流程短,规模小,以坡面型为主,多由滑坡崩塌转化而来,发生频率低,突发性强,危害大。文章揭示在植被覆盖的花岗岩地区,持续强降雨引发群发性浅层土质滑坡,在斜坡微凹处或小沟谷,易转化成泥石流,形成灾害链。对该类型滑坡泥石流特征及成因进行分析,为福建省乃至全国同类型滑坡-泥石流的防治提供经验。  相似文献   

四川大光包-黄洞子沟特大泥石流基本特征、成因及危险性评价     

孟晓捷  胡炜  张新社  孙萍萍 《西北地质》2014,(3):147-156

2013年7月8~10日四川省由于普降暴雨,发生多起泥石流、滑坡等地质灾害。在野外调查的基础上,对大光包-黄洞子沟特大泥石流形成原因进行分析,对未来发展趋势做出预测和危险性评价。调查结果表明:1大光包-黄洞子沟泥石流属于典型的沟谷型泥石流,可分为形成区-流通区-堆积区。2本次泥石流形成原因为体积高达1×108 m3以上的松散的大光包滑坡堆积体提供物源;极端的降雨气候直接启动松散堆积物形成泥石流;地形条件有利于泥石流侵蚀、搬运和堆积,为典型的滑坡-碎屑流-泥石流型,且仍处于活跃期,并在今后会有加强的趋势。3经过对大光包-黄洞子沟泥石流进行危险度评价可知:该泥石流危险度为0.482,属于中度危险泥石流。  相似文献   

都江堰市龙池镇黄央沟泥石流特征与防治工程效果分析     

曾庆铭  薛强  徐继伟 《西北地质》2014,(3):192-199

黄央沟位于"5.12"汶川地震的极重灾区四川省都江堰市龙池镇,地震使沟内山体发生大规模的滑坡和崩塌,其为泥石流的形成提供了丰富的松散固体物质。地震后黄央沟泥石流十分活跃,2010年8月13日、8月18日和2013年7月9日均暴发了泥石流,造成了严重的经济损失。笔者通过对黄央沟泥石流灾害现场进行实地调查,详细分析了黄央沟泥石流的形成条件和发育特征,并对已有防治工程效果进行了分析和探讨。针对防治工程存在的问题和黄央沟泥石流的特点,建议在沟道下游和堆积区修建排导沟,使泥石流顺畅排入龙溪河;采取工程和生物措施来稳定沟道内的崩滑堆积体和不稳定斜坡,减少泥石流物源;沟口公路采用高架桥跨越方式通过泥石流堆积扇。该研究结果可为强震区泥石流灾害的防治提供参考。  相似文献   

甘肃省泥石流发育特征、成因分析及其危害     

陈秀清  ;白福  ;于燕燕 《西北地质》2014,(3):205-210

甘肃省是我国泥石流地质灾害最为严重的4大省份之一。据统计,全省发育有泥石流沟6 260条,这些泥石流沟大部分集中在东部地区,河西地区较少。泥石流强烈发育的陇南、甘南山区,地势高差多在1 000m以上,山坡坡度≥30°。区内地质构造复杂,地震活动频繁,广泛分布黄土、泥岩、千枚岩、页岩等软弱易滑岩土体,为泥石流发育提供了必要的地形条件和岩土条件,降雨和地震及人类活动是诱发因素。长期以来,频繁发生的泥石流地质灾害已给甘肃人民的生命财产和工农业生产建设带来了严重威胁和危害,造成约3 715人死亡,直接经济损失几十亿。其中,2010年8月8日,舟曲发生的特大泥石流地质灾害震惊世界,泥石流地质灾害已严重困扰和和制约着甘肃省的国民经济发展和广大人民群众的正常生活。因此,应通过科学规划人类活动,采取必要的工程措施制约泥石流地质灾害的发生,减轻泥石流地质灾害造成的损失。  相似文献   

Seismic structure of the Helan–Liupan–Ordos western margin tectonic belt in North-Central China and its geodynamic implications     

《Journal of Asian Earth Sciences》2014

We study high-resolution three-dimensional P-wave velocity (Vp) tomography and anisotropic structure of the crust and uppermost mantle under the Helan–Liupan–Ordos western margin tectonic belt in North-Central China using 13,506 high-quality P-wave arrival times from 2666 local earthquakes recorded by 87 seismic stations during 1980–2008. Our results show that prominent low-velocity (low-V) anomalies exist widely in the lower crust beneath the study region and the low-V zones extend to the uppermost mantle in some local areas, suggesting that the lower crust contains higher-temperature materials and fluids. The major fault zones, especially the large boundary faults of major tectonic units, are located at the edge portion of the low-V anomalies or transition zones between the low-V and high-V anomalies in the upper crust, whereas low-V anomalies are revealed in the lower crust under most of the faults. Most of large historical earthquakes are located in the boundary zones where P-wave velocity changes drastically in a short distance. Beneath the source zones of most of the large historical earthquakes, prominent low-V anomalies are visible in the lower crust. Significant P-wave azimuthal anisotropy is revealed in the study region, and the pattern of anisotropy in the upper crust is consistent with the surface geologic features. In the lower crust and uppermost mantle, the predominant fast velocity direction (FVD) is NNE–SSW under the Yinchuan Graben and NWW–SEE or NW–SE beneath the Corridor transitional zone, Qilian Orogenic Belt and Western Qinling Orogenic Belt, and the FVD is NE–SW under the eastern Qilian Orogenic Belt. The anisotropy in the lower crust may be caused by the lattice-preferred orientation of minerals, which may reflect the lower-crustal ductile flow with varied directions. The present results shed new light on the seismotectonics and geodynamic processes of the Qinghai–Tibetan Plateau and its northeastern margin.  相似文献   

Causes of geothermal fields and characteristics of ground temperature fields in China     

MAO Xiao-ping  LI Ke-wen  WANG Xin-wei 《地下水科学与工程》2014,7(1):15-28

There are many arguments on energy sources and main controlling factors of geothermal fields, so a systematic study on the distribution of ground temperature fields shall be necessary. In this paper the thermal conduction forward method of geothermal field is used to simulate cooling rate of abnormal heat sources and heat transfer of the paleo-uplift model. Combined with a large number of geothermal field exploration cases and oil exploration well temperature curves of domestic and foreign, the following conclusions are drawn: (1) According to the magmatic activity time, the magmatism activities are divided into two categories: Magma active areas (activity time < 500 000 years) and weak/magma inactive areas (activity time > 500 000 years). The latter has a fast cooling rate (the cooling time of the magma pocket buried around 10 km is less than 200 000 years) after it has intruded into the shallow layer and it has no direct contribution to modern geothermal fields; (2) China belongs to a weak/magma inactive area such as Tengchong region and Qinghai-Tibet region because the chronological data of these regions show that its magma activity time is more than 500 000 years; (3) The temperature of most geothermal fields can be obviously divided into three segments in the vertical direction: A high geothermal gradient segment (Segment H) at the surface, then a low geothermal gradient segment (Segment L) at a secondary depth, and finally a lower temperature segment (Segment D) at a deeper depth. The temperature isoline presents a mirror reflection relation on the temperature profile, indicating that geothermal field is dominated by heat conduction, rather than having an abnormally high temperature “heat source” to provide heat; (4) Near-surface (0-5 km) materials’ lateral heterogeneity caused by tectonic movement shall probably be the main controlling factor of ground temperature fields.  相似文献   

Mud dispersal across a Cretaceous prodelta: Storm‐generated,wave‐enhanced sediment gravity flows inferred from mudstone microtexture and microfacies     

A. Guy Plint 《Sedimentology》2014,61(3):609-647

Determining sediment transport direction in ancient mudrocks is difficult. In order to determine both process and direction of mud transport, a portion of a well‐mapped Cretaceous delta system was studied. Oriented samples from outcrop represent prodelta environments from ca 10 to 120 km offshore. Oriented thin sections of mudstone, cut in three planes, allowed bed microstructure and palaeoflow directions to be determined. Clay mineral platelets are packaged in equant, face‐face aggregates 2 to 5 μm in diameter that have a random orientation; these aggregates may have formed through flocculation in fluid mud. Cohesive mud was eroded by storms to make intraclastic aggregates 5 to 20 μm in diameter. Mudstone beds are millimetre‐scale, and four microfacies are recognized: Well‐sorted siltstone forms millimetre‐scale combined‐flow ripples overlying scoured surfaces; deposition was from turbulent combined flow. Silt‐streaked claystone comprises parallel, sub‐millimetre laminae of siliceous silt and clay aggregates sorted by shear in the boundary layer beneath a wave‐supported gravity flow of fluid mud. Silty claystone comprises fine siliceous silt grains floating in a matrix of clay and was deposited by vertical settling as fluid mud gelled under minimal current shear. Homogeneous clay‐rich mudstone has little silt and may represent late‐stage settling of fluid mud, or settling from wave‐dissipated fluid mud. It is difficult or impossible to correlate millimetre‐scale beds between thin sections from the same sample, spaced only ca 20 mm apart, due to lateral facies change and localized scour and fill. Combined‐flow ripples in siltstone show strong preferred migration directly down the regional prodelta slope, estimated at ca 1 : 1000. Ripple migration was effected by drag exerted by an overlying layer of downslope‐flowing, wave‐supported fluid mud. In the upper part of the studied section, centimetre‐scale interbeds of very fine to fine‐grained sandstone show wave ripple crests trending shore normal, whereas combined‐flow ripples migrated obliquely alongshore and offshore. Storm winds blowing from the north‐east drove shore‐oblique geostrophic sand transport whereas simultaneously, wave‐supported flows of fluid mud travelled downslope under the influence of gravity. Effective wave base for sand, estimated at ca 40 m, intersected the prodelta surface ca 80 km offshore whereas wave base for mud was at ca 70 m and lay ca 120 km offshore. Small‐scale bioturbation of mud beds co‐occurs with interbedded sandstone but stratigraphically lower, sand‐free mudstone has few or no signs of benthic fauna. It is likely that a combination of soupground substrate, frequent storm emplacement of fluid mud, low nutrient availability and possibly reduced bottom‐water oxygen content collectively inhibited benthic fauna in the distal prodelta.  相似文献   

Matrix‐rich and associated matrix‐poor sandstones: Avulsion splays in slope and basin‐floor strata     

Viktor Terlaky  Robert William Charles Arnott 《Sedimentology》2014,61(5):1175-1197

A common facies observed in deep‐water slope and especially basin‐floor rocks of the Neoproterozoic Windermere Supergroup (British Columbia, Canada) is structureless, coarse‐tail graded, medium‐grained to coarse‐grained sandstone with from 30% to >50% mud matrix content (i.e. matrix‐rich). Bed contacts are commonly sharp, flat and loaded. Matrix‐rich sandstone beds typically form laterally continuous units that are up to several metres thick and several tens to hundreds of metres wide, and commonly adjacent to units of comparatively matrix‐poor, scour‐based sandstone beds with large tabular mudstone and sandstone clasts. Matrix‐rich units are common in proximal basin‐floor (Upper Kaza Group) deposits, but occur also in more distal basin‐floor (Middle Kaza Group) and slope (Isaac Formation) deposits. Regardless of stratigraphic setting, matrix‐rich units typically are directly and abruptly overlain by architectural elements comprising matrix‐poor coarse sandstone (i.e. channels and splays). Despite a number of similarities with previously described matrix‐rich beds in the literature, for example slurry beds, linked debrites and co‐genetic turbidites, a number of important differences exist, including the stratal make‐up of individual beds (for example, the lack of a clean sandstone turbidite base) and their stratigraphic occurrence (present throughout base of slope and basin‐floor strata, but most common in proximal lobe deposits) and accordingly suggest a different mode of emplacement. The matrix‐rich, poorly sorted nature of the beds and the abundance and size of tabular clasts in laterally equivalent sandstones imply intense upstream scouring, most probably related to significant erosion by an energetic plane‐wall jet or within a submerged hydraulic jump. Rapid energy loss coupled with rapid charging of the flow with fine‐grained sediment probably changed the rheology of the flow and promoted deposition along the margins of the jet. Moreover, these distinctive matrix‐rich strata are interpreted to represent the energetic initiation of the local sedimentary system, most probably caused by a local upflow avulsion.  相似文献