Application of stress mapping in cross‐section to understanding ore geometry,predicting ore zones and development of drilling strategies     

J. L. Mair  V. J. Ojala  B. P. Salier  D. I. Groves  S. M. Brown 《Australian Journal of Earth Sciences》2013,60(5):895-912

Stress mapping is a numerical modelling technique used to determine the distribution and relative magnitude of stress during deformation in a mineralised terrane. It is based on the general principle that fluid flow in the Earth's crust is primarily related to pressure gradients. It is best applied to epigenetic hydrothermal mineral deposits, where fluid flow and fluid flux are enhanced in dilational sections of structures and in sites of enhanced rock permeability due to high fracture density. These are defined by sites of low minimum principal stress (σ₃). Most stress mapping is carried out in two dimensions in plan view using geological maps. This is suitable for terranes with steeply dipping lithostratigraphy and structures in which the distribution of mineral deposits is largely controlled by fault structures portrayed on the maps. However, for terranes with gently dipping sequences and structures, and for situations where deposits are sited in and near the hinges of complex fold structures, stress mapping in cross‐section is preferable. The effectiveness of stress mapping is maximised if mineralisation was late in the evolutionary history of the host terrane, and hence the structural geometry of the terrane and contained deposits were essentially that expressed today. The orientation of syn‐mineralisation far‐field stresses must also be inferred. Two examples of orogenic gold deposits, which meet the above criteria, are used to illustrate the potential of stress mapping in cross‐section. Sunrise Dam, located in the Archaean Yilgarn Craton, is a lode‐gold deposit sited in a thrust‐fold belt. Stress mapping illustrates the heterogeneity of stress distribution in the complex structural geometry of the deposit, and predicts the preferential siting of ore zones around the intersections of more steeply dipping, linking thrusts and banded iron‐formation units, and below the controlling more gently dipping basal thrust, the Sunrise Shear. The Howley Anticline in the Pine Creek block hosts several Palaeoproterozoic gold deposits, sited in complex anticlinal structures in greywacke sequences. Stress mapping indicates that gold ores should develop in the hinge zones of symmetrical anticlines, in the hinge zones and more steeply dipping to overturned limbs of asymmetric anticlines, and in and around thrusts in both anticlines and parasitic synclines. The strong correlation between the predictions of the stress mapping, based on the distribution of low σ₃, and the location of gold ores emphasises the potential of stress mapping in cross‐section, not only as an exploration tool for the discovery of additional resources or deposits, but also as a test of geological models. Knowledge of the potential siting of gold ores and their probable orientations also provides a guide to drilling strategies in both mine‐ and regional‐scale exploration.  相似文献   

Crustal complexity in the Lachlan Orogen revealed from teleseismic receiver functions     

F. R. FONTAINE  H. TKALCIC  B. L. N. KENNETT 《Australian Journal of Earth Sciences》2013,60(3):413-430

There is an ongoing debate about the tectonic evolution of southeast Australia, particularly about the causes and nature of its accretion to a much older Precambrian core to the west. Seismic imaging of the crust can provide useful clues to address this issue. Seismic tomography imaging is a powerful tool often employed to map elastic properties of the Earth's lithosphere, but in most cases does not constrain well the depth of discontinuities such as the Mohorovi?i? (Moho). In this study, an alternative imaging technique known as receiver function (RF) has been employed for seismic stations near Canberra in the Lachlan Orogen to investigate: (i) the shear-wave-velocity profile in the crust and uppermost mantle, (ii) variations in the Moho depth beneath the Lachlan Orogen, and (iii) the nature of the transition between the crust and mantle. A number of styles of RF analyses were conducted: H-K stacking to obtain the best compressional–shear velocity (V _P /V _S) ratio and crustal thickness; nonlinear inversion for the shear-wave-velocity structure and inversion of the observed variations in RFs with back-azimuth to investigate potential dipping of the crustal layers and anisotropy. The thick crust (up to 48 km) and the mostly intermediate nature of the crust?mantle transition in the Lachlan Orogen could be due to the presence of underplating at the base of the crust, and possibly to the existing thick piles of Ordovician mafic rocks present in the mid and lower crust. Results from numerical modelling of RFs at three seismic stations (CAN, CNB and YNG) suggest that the observed variations with back-azimuth could be related to a complex structure beneath these stations with the likelihood of both a dipping Moho and crustal anisotropy. Our analysis reveals crustal thickening to the west beneath CAN station which could be due to slab convergence. The crustal thickening may also be related to the broad Macquarie volcanic arc, which is rooted to the Moho. The crustal anisotropy may arise from a strong N–S structural trend in the eastern Lachlan Orogen and to the preferred crystallographic orientation of seismically anisotropic minerals in the lower and middle crust related to the paleo-Pacific plate convergence.  相似文献   

Response of seismically isolated structures to rocking‐type excitations     

Ioannis Politopoulos 《地震工程与结构动力学》2010,39(3):325-342

In this paper, the origin of rocking‐type excitations and their effects on the response of base isolated structures are studied. In particular, the role of kinematic interaction in the determination of the rocking excitation is highlighted. The cases of surface foundations subjected to horizontally propagating waves, as well as of embedded foundations under vertically incident shear waves are examined. The validity of the kinematic interaction based on the rigid base mat assumption is discussed. It is shown that, in the case of classical horizontal isolation, rocking input may amplify significantly the response of the lower non‐isolated modes. The examination of full three‐dimensional isolation and active and semi‐active control methods demonstrates the efficacy of these methods to improve the performance of seismically isolated structures subjected to rocking excitations. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

熔体结构与酸性熔岩的某些特征          下载免费PDF全文

周金诚 《岩石矿物学杂志》1988,7(3):215-221

在流纹质岩浆中,存在两种不混溶的熔体,一种熔体富SiO_2贫FeO,另一种则相反。从熔体结构的角度看,前一种熔体富桥氧,后者则富自由氧。水的解聚作用可以改变流纹质岩浆的结构,即降低它的聚合程度,因此,含水流纹岩浆的粘度低于玄武岩浆的粘度,从而使流纹岩中流纹构造发育。 实际工作中应避免混淆流纹岩与酸性熔结凝灰岩。  相似文献   

锡石的晶体结构和形态的关系          下载免费PDF全文

柴钢  王文魁 《岩石矿物学杂志》1988,7(4):374-381

本文对不同成因类型的锡石晶体形态进行了研究,并从PBC(周期性键链)理论出发,讨论了锡石晶体形态与晶体结构的关系。笔者认为,锡石晶体具有三种F面,即s{111}、e{101}、m{110},与Hartman对同样结构类型的金红石晶面性质划分有所差异。据锡石晶面结构性质所推导的理想晶体形态图,与晶体测量所得到的天然晶体形态图总体上相吻合。  相似文献   

我国几个矿区叶蜡石X射线粉晶衍射研究   总被引：4，自引：0，他引：4  

李文瑛 《矿物学报》1989,9(4):378-382

对我国几个主要类型叶蜡石矿的叶蜡石做了X射线粉晶衍射研究。从大量实验结果发现,所研究叶蜡石存在单斜晶系和三斜晶系两种多型。单斜晶系(2M);空间群G_(2h)~6-C2/c,a=5.175A,b=8.902A,c=18.673A,β=100.1°,Z=4;三斜晶系(1Tc):空间群P_c,a=5.162A,b=8.965A,c=9.346A,a=91.2°,β=99.96°,γ=89.91°,Z=2。  相似文献   

断裂造山带   总被引：11，自引：0，他引：11  

杨巍然 《地球科学》1989,14(1):9-18

  相似文献   

有关矿石构造、结构研究的几个问题     

马新兴 《新疆地质》1989,(4)

本文论述了加强矿石研究的重要性.并对块状构造、浸染状构造、海绵陨铁构造、乳滴状构造、层纹状构造的分类命名及代晶结构的鉴定特征提出了自己的看法.  相似文献   

断裂构造频率图与金矿分布的关系：以美国内华达州为例     

徐增亮  彭人勇 《华东地质学院学报》1989,12(2):1-7

  相似文献   

航空摄影最佳曝光量的选择     

吴祖义  孙和利 《武汉大学学报(信息科学版)》1988,(2)

分解力是评定影象质量的重要指标。本文介绍利用改进后的国产9 w测微密度仪,测定航空软片静态分解力与曝光量的关系。以最大分解力所相应的曝光量作为确定航摄软片感光度的基准,以此为基础,确定航摄底片的最大密度(D_(max))、最小密度(D_(min))、影象反差(△D)和平均密度(D_R)本文对国产1022T、1022P、柯达2402、2412等航摄软片进行了研究,其试验结果可作为今后修改航摄规范的基础。  相似文献