3D shear-wave velocity structure of the Eifel plume, Germany     

Matthias KeyserJoachim R.R. Ritter  Michael Jordan 《Earth and Planetary Science Letters》2002,203(1):59-82

The Quaternary Eifel volcanic fields, situated on the Rhenish Massif in Germany, are the focus of a major interdisciplinary project. The aim is a detailed study of the crustal and mantle structure of the intraplate volcanic fields and their deep origin. Recent results from a teleseismic P-wave tomography study reveal a deep low-velocity structure which we infer to be a plume in the upper mantle underneath the volcanic area [J.R.R. Ritter et al., Earth Planet. Sci. Lett. 186 (2001) 7-14]. Here we present a travel-time investigation of 5038 teleseismic shear-wave arrivals in the same region. First, the transverse (T) and radial (R) component travel-time residuals are treated separately to identify possible effects of seismic anisotropy. A comparison of 2044 T- and 2994 R-component residuals demonstrates that anisotropy does not cause any first-order travel-time effects. The data sets reveal a deep-seated low-velocity anomaly beneath the volcanic region, causing a delay for teleseismic shear waves of about 3 s. Using 3773 combined R- and T-component residuals, an isotropic non-linear inversion is calculated. The tomographic images reveal a prominent S-wave velocity reduction in the upper mantle underneath the Eifel region. The anomaly extends down to at least 400 km depth. The velocity contrast to the surrounding mantle is depth-dependent (from −5% at 31-100 km depth to at least −1% at 400 km depth). At about 170-240 km depth the anomaly is nearly absent. The resolution of the data is sufficient to recover the described features, however the anomaly in the lower asthenosphere is underestimated due to smearing and damping. The main anomaly is similar to the P-wave model except the latter lacks the ‘hole’ near 200 km depth, and both are consistent with an upper mantle plume structure. For plausible anhydrous plume material in the uppermost 100 km of the mantle, an excess temperature as great as 200-300 K is estimated from the seismic anomaly. However, 1% partial melt reduces the required temperature anomaly to about 100 K. The temperature anomaly associated with the deeper part of the plume (250 to about 450 km depth) is at least 70 K. However, this estimate is quite uncertain, because the amplitude of the shear-wave anomaly may be larger than the modelled one. Another possibility is water in the upwelling material. The gap at 170-240 km depth could arise from an increase of the shear modulus caused by dehydration processes which would not affect P-wave velocities as much. An interaction of temperature and compositional variations, including melt and possibly water, makes it difficult to differentiate quantitatively between the causes of the deep-seated low-velocity anomaly.  相似文献   

Isotope variations in a Sierra Nevada snowpack and their relation to meltwater     

Padinare V. Unnikrishna  Jeffrey J. McDonnell  Carol Kendall   《Journal of Hydrology》2002,260(1-4):38-57

Isotopic variations in melting snow are poorly understood. We made weekly measurements at the Central Sierra Snow Laboratory, California, of snow temperature, density, water equivalent and liquid water volume to examine how physical changes within the snowpack govern meltwater δ¹⁸O. Snowpack samples were extracted at 0.1 m intervals from ground level to the top of the snowpack profile between December 1991 and April 1992. Approximately 800 mm of precipitation fell during the study period with δ¹⁸O values between −21.35 and −4.25‰. Corresponding snowpack δ¹⁸O ranged from −22.25 to −6.25‰. The coefficient of variation of δ¹⁸O in snowpack levels decreased from −0.37 to −0.07 from winter to spring, indicating isotopic snowpack homogenization. Meltwater δ¹⁸O ranged from −15.30 to −8.05‰, with variations of up to 2.95‰ observed within a single snowmelt episode, highlighting the need for frequent sampling. Early snowmelt originated in the lower snowpack with higher δ¹⁸O through ground heat flux and rainfall. After the snowpack became isothermal, infiltrating snowmelt displaced the higher δ¹⁸O liquid in the lower snowpack through a piston flow process. Fractionation analysis using a two-component mixing model on the isothermal snowpack indicated that δ¹⁸O in the initial and final half of major snowmelt was 1.30‰ lower and 1.45‰ higher, respectively, than the value from simple mixing. Mean snowpack δ¹⁸O on individual profiling days showed a steady increase from −15.15 to −12.05‰ due to removal of lower δ¹⁸O snowmelt and addition of higher δ¹⁸O rainfall. Results suggest that direct sampling of snowmelt and snow cores should be undertaken to quantify tracer input compositions adequately. The snowmelt sequence also suggests that regimes of early lower δ¹⁸O and later higher δ¹⁸O melt may be modeled and used in catchment tracing studies.  相似文献   

青藏高原土壤水热分布特征及冻融过程在季节转换中的作用   总被引：21，自引：0，他引：21  

杨梅学  姚檀栋  何元庆 《山地学报》2002,20(5):553-558

利用GAME-Tibet期间所取得的高分辩率土壤温度和含水量资料，对青藏高原（主要是藏北高原）土壤水热分布特征及冻融过程在季节转换中的作用进行了分析。指出藏北高原4cm学深处土壤在10月份开始冻结，次年4-5月份开始消融，冻结持续时间长达5-7个月。冻结过程有利于土壤维持其水分，因此，在刚刚开始消融时土壤含水量仍然很高。从而为夏季风爆发前土壤通过蒸发向大气提供水分打下了基础。指出土壤冻融过程可能在高原季节转换中起着重要作用。  相似文献   

Identification of geomorphic process units in Kärkevagge, northern Sweden, by remote sensing and digital terrain analysis     

Annett Bartsch  Martin Gude  Christer Jonasson  & Dieter Scherer 《Geografiska Annaler: Series A, Physical Geography》2002,84(3-4):171-178

Sediment transport processes in the Kärkevagge are investigated concerning their spatial and temporal characteristics due to long–term monitoring. Within this study remote sensing techniques and GIS modelling in connection with geomorphic mapping are applied for identification and characterization of geomorphic process units. Relationships between geomorphometric parameters and slope processes like solifluction, talus creep and rockfall have been analysed. Multitemporal Landsat–TM5 scenes are used as source for landcover characteristics (Normalized Difference Vegetation Index) after preprocessing involving orthorectification and topographic normalization in order to remove possible terrain–induced effects. Additionally, a digital elevation model with a resolution of 20 m for the Kärkevagge catchment is developed and parameters like slope gradient, slope aspect and profile curvature are extracted as input for the analysis of the sediment transport system. The combination of landcover information, geomorphometrical and topological features allows the definition of areas for single process activities. They show specific sediment displacement characteristics depending on material conditions, topological and geometrical features. Geomorphic process units, which show a homogenous composition, are extracted from these available layers.  相似文献   

Vegetation as a tool in the characterisation of geomorphological forms and processes: an example from the Abisko Mountains     

Anna Koz&#;owska  & Zofia R&#;czkowska 《Geografiska Annaler: Series A, Physical Geography》2002,84(3-4):233-244

  相似文献   

Velocity profile of a sand cloud blowing over a gravel surface   总被引：2，自引：0，他引：2  

Zhibao Dong  Hongtao Wang  Xiaoping Liu  Fang Li  Aiguo Zhao 《Geomorphology》2002,45(3-4)

Particle dynamic analyzer (PDA) measurement technology was used to study the turbulent characteristics and the variation with height of the mean horizontal (in the downwind direction) and vertical (in the upward direction) particle velocity of a sand cloud blowing over a gravel surface. The results show that the mean horizontal particle velocity of the cloud increases with height, while the mean vertical velocity decreases with height. The variation of the mean horizontal velocity with height is, to some extent, similar to the wind profile that increases logarithmically with height in the turbulent boundary layer. The variation of the mean vertical velocity with height is much more complex than that of the mean horizontal velocity. The increase of the resultant mean velocity with height can be expressed by a modified power function. Particle turbulence in the downwind direction decreases with height, while that in the vertical direction is complex. For fine sands (0.2–0.3 mm and 0.3–0.4 mm), there is a tendency for the particle turbulence to increase with height. In the very near-surface layer (<4 mm), the movement of blown sand particles is very complex due to the rebound of particles on the bed and the interparticle collisions in the air. Wind starts to accelerate particle movement about 4 mm from the surface. The initial rebound on the bed and the interparticle collisions in the air have a profound effect on particle movement below that height, where particle concentration is very high and wind velocity is very low.  相似文献   

Study of weathering processes developed on old piedmont surfaces in Western Spain: new contributions to the interpretation of the “Raña” profiles     

E. Molina Ballesteros  M. Cantano Martín   《Geomorphology》2002,42(3-4)

The Hercynian basement of the Iberian Peninsula was uplifted by the Alpine orogeny during the Tertiary. It gave rise to a set of block mountains and tectonic grabens, one of which is the Ciudad Rodrigo Basin. It is located in Western Spain and forms a westward extension of the great Tertiary Duero Basin. The sediments filling this graben are of continental origin, their ages ranging from Palaeogene to Quaternary. Morphologically, the southern part of this basin forms a set of piedmont surfaces (the “Raña” surfaces) appearing above the terrace system of the present rivers. This paper examines the weathering processes developed over these old piedmont surfaces using micromorphological, XR diffraction, scanning electron microscopy (SEM) and microporosity techniques.The Raña sediments are rich in quartzite pebbles and gravel within a clayey matrix. Once deposited, these materials underwent important in situ weathering processes under somewhat hydromorphic conditions, of which hydrolysis, ferrolysis and xerolysis were the most important. All these processes gave rise to: (1) transformation of most of the clasts of shists and slates into a matrix causing the destruction of the original sedimentary structures and a relative concentration of the resistant lithologies (quartzites and quartz); (2) important changes in the clay fraction, leading to a predominance of kaolinite in the upper levels of the profiles, (3) release of elements from primary minerals, Fe being one of the most important, and (4) redistribution of matter, mainly clay and Fe oxyhydroxides, within the profiles.The coexistence of seasonal periods with pF higher than 4.2 repeated over a long time, together with poor internal and external drainage conditions, are the cause of the special features displayed by Raña deposits.  相似文献   

The rate of grain release by pore-ice sublimation in cold-aeolian environments   总被引：1，自引：0，他引：1  

Deanna van Dijk  Jane Law 《Geografiska Annaler: Series A, Physical Geography》2003,85(1):99-113

Pore‐ice sublimation is a prerequisite for aeolian activity in cold environments where surface sediments hold significant amounts of frozen water. Few quantitative studies have defined the rate of grain release from cemented surfaces by pore‐ice sublimation. In 1996–1997, controlled field experiments at Presqu'ile Beach, Ontario, were implemented to measure sediment release from frozen surfaces. The release rates were compared to the local wind regime, ambient temperature and humidity. In additional field experiments, the effect of sediment water content on grain release by sublimation was examined. From the experimental results, an equation which predicts grain release based on local wind speed, ground temperature, humidity, and surface water content is proposed. Predicted release rates show reasonable agreement with natural deflation measured on the beach at Presqu'ile Provincial Park.  相似文献   

Dynamic processes of a simple linear dune—a study in the Taklimakan Sand Sea, China   总被引：1，自引：0，他引：1  

Xunming Wang  Zhibao Dong  Jianjun Qu  Jiawu Zhang  Aiguo Zhao 《Geomorphology》2003,52(3-4):233-241

Samples of dune sands, surveys of the morphology and field measurements of wind velocity and direction of a simple linear dune in Taklimakan Sand Sea show that the airflow and sand flux vary with the change of wind direction on the dune surface. Decrease of the airflow stress on the lee flank does not result in much decrease of the sand flux because of the low threshold shear velocities and the airflow conditions. There are no significant relations between the sand flux on the lee flank and the angle of incidence of the airflow. The low threshold shear velocities and the maintenance of the sand flux at the lee flank are the main mechanisms keeping the linear shape of the dunes. Measurements of the sand flux shows that it reaches a maximum on the crest of the dune. The grain size of the transported sands has some differences compared to that of the dune surface. The sands transported are finer than that on the dune surface, but better sorted under the influence of the medium to low wind activity. The field experiment results exhibit that it is possible for the dunes to be shaped as linear dunes during the processes of accumulation and elongation.  相似文献   

添加剂对聚乙二醇辛基苯基醚浊点的影响     

陈庆春  邓慧宇  马燕明  张兴国 《华东地质学院学报》2003,26(3):284-286

浊点是非离子表面活性剂的一个特性参数，它是非离子表面活性荆溶液由透明变浑浊，和由浑浊变透明的平均温度。聚乙二醇辛基苯基醚是一种非离子表面活性剂，通过实验测定了有机酸、醇、无机盐、聚合物等添加剂对聚乙二醇辛基苯基醚浊点的影响。结果表明，不加任何添加剂时，聚乙二醇辛基苯基醚的浊点为89℃；添加有机酸时，浊点随浓度升高先下降后上升；添加醇时，碳链短的随浓度升高浊点升高，碳链长的随浓度升高而下降；添加无机钠盐时，浊点随浓度升高而下降；添加聚合物时。浊点超过100℃。  相似文献