DEM高程基准转换方法及应用     

李月华  孙超 《北京测绘》2021,35(2):217-221

随着数字高程模型(DEM)在电力行业的广泛应用,电力地图需求部门对数字高程模型的要求越来越高。针对在数字高程模型生产中,电力业主方提供的立体模型高程基准不统一的问题,本文提出了基于特征数据的DEM基础转换方法。该方法在进行DEM制作过程中采用先采集特征数据,后转换特征数据高程基准的方式,实现了DEM成果的高程基准的转换,并进行了实验验证。结果表明,通过对比转换前后的DEM成果位置精度,验证了该方法的正确性。  相似文献   

Carbon, sulfur and O₂ across the Permian–Triassic boundary     

Robert A. Berner   《Journal of Geochemical Exploration》2006,88(1-3):416

A model for the carbon and sulfur cycles across the Permian–Triassic boundary has been constructed from carbon and sulfur isotopic data. Results indicate a drop in global organic matter burial, the formation of an anoxic deep ocean, and a large drop in atmospheric oxygen over the time span 270 to 240 Ma. Much of these changes were probably due to a drop in terrestrial productivity and preservation and an increase in global aridity.  相似文献   

Forests, climate, and silicate rock weathering     

K. Caldeira   《Journal of Geochemical Exploration》2006,88(1-3):419

Over time periods of 10⁶ years and longer, atmospheric carbon dioxide content is largely controlled by a balance between silicate rock weathering and CO₂ sources (degassing from the Earth plus net organic carbon oxidation). Vegetation cover can affect silicate rock weathering rates by increasing soil CO₂ content, stabilizing soil cover, and producing organic acids. Forests absorb more solar radiation than most other ecosystems; this tends to warm Earth's climate, especially outside of the tropics; this warmth would tend to increase silicate rock weathering rates. Here, we develop preliminary parameterizations of this effect that could be incorporated into carbonate–silicate cycle models, based on the results of general circulation model simulations.  相似文献   

Measurement of the total nitrogen in lake sediments： Comparison and its environmental significance     

Wei JIANG Xinqing LEE 《中国地球化学学报》2006,25(B08):12-12

Nitrogen cycle is an important bio-geochemical process in the environment. Measurement of the total nitrogen （TN） is a routine experiment in agriculture, biology and environmental sciences. The Kjeldahl method （KM） and elemental analyzer method （EA） are both commonly used to determine TN. Total nitrogen by EA is the sum of nitrate （NO3）, nitrite （NO2）, organic nitrogen and ammonia. Total nitrogen by KM （TKN） is made up of both organic nitrogen and ammonia. A comparative study focused on the two methods is conducted by analysis of TN in 97 samples from the sediment sequence of Gouchi, a salt lake in North China. KM presents a higher degree of accuracy than EA with a standard deviation of 0.007 vs. 0.024. With the presence of nitrate and/or nitrite nitrogen, however, measurement by KM is considerably lower than that by EA. Therefore, for samples from lake sediment sequences or soils in North China, KM is inapplicable to determining TN because of usually high contents of nitrous salt. Despite the inconsistency, use of both methods to the same samples makes sense in reconstructions of climatic and environmental changes from lake sediments. In Lake Gouchi, the contents of nitrate and nitrite nitrogen vary from 1.40% in the lower part of the sequence to 14.77% in the uppermost part, suggesting a gradual evolution process from a fresh water lake to the present-day salt lake.  相似文献   

Periodic accumulation and destruction of aeolian erg sequences in the Permian Cedar Mesa Sandstone, White Canyon, southern Utah, USA     

NIGEL P. MOUNTNEY 《Sedimentology》2006,53(4):789-823

The Permian Cedar Mesa Sandstone represents the product of at least 12 separate aeolian erg sequences, each bounded by regionally extensive deflationary supersurfaces. Facies analysis of strata in the White Canyon area of southern Utah indicates that the preserved sequences represent erg‐centre accumulations of mostly dry, though occasionally water table‐influenced aeolian systems. Each sequence records a systematic sedimentary evolution, enabling phases of aeolian sand sea construction, accumulation, deflation and destruction to be discerned and related to a series of underlying controls. Sand sea construction is signalled by a transition from damp sandsheet, ephemeral lake and palaeosol deposition, through a phase of dry sandsheet deposition, to the development of thin, chaotically arranged aeolian dune sets. The onset of the main phase of sand sea accumulation is reflected by an upward transition to larger‐scale, ordered sets which represent the preserved product of climbing trains of sinuous‐crested transverse dunes with original downwind wavelengths of 300–400 m. Regularly spaced reactivation surfaces indicate periodic shifts in wind direction, which probably occurred seasonally. Compound co‐sets of cross strata record the oblique migration of superimposed slipfaced dunes over larger, slipfaceless draa. Each aeolian sequence is capped by a regionally extensive supersurface characterized by abundant calcified rhizoliths and bioturbation and which represents the end product of a widespread deflation episode whereby the accumulation surface was lowered close to the level of the water table as the sand sea was progressively cannibalized by winds that were undersaturated with respect to their potential carrying capacity. Aeolian sequence generation is considered to be directly attributable to cyclical changes in climate and related changes in sea level of probable glacio‐eustatic origin that characterize many Permo‐Carboniferous age successions. Sand sea construction and accumulation occurred during phases of increased aridity and lowered sea level, the main sand supply being former shallow marine shelf sediments that lay to the north‐west. Sand sea deflation and destruction would have commenced at, or shortly after, the time of maximum aridity as the available sand supply became exhausted. Restricted episodes of non‐aeolian accumulation would have occurred during humid (interglacial) phases, accumulation and preservation being enabled by slow rises in the relative water table. Subsidence analysis within the Paradox Basin, together with comparisons to other similar age successions suggests that the climatic cycles responsible for generating the Cedar Mesa erg sequences could be the product of 413 000 years so‐called long eccentricity cycles. By contrast, annual advance cycles within the aeolian dune sets indicate that the sequences themselves could have accumulated in just a few hundred years and therefore imply that the vast majority of time represented by the Cedar Mesa succession was reserved for supersurface development.  相似文献   

Structural architecture of a highly oblique divergent plate boundary segment   总被引：1，自引：0，他引：1  

Amy E. Clifton  Simon A. Kattenhorn 《Tectonophysics》2006,419(1-4):27-40

The Reykjanes Peninsula in southwest Iceland is a highly oblique spreading segment of the Mid-Atlantic Ridge oriented about 30° from the direction of absolute plate motion. We present a complete and spatially accurate map of fractures for the Reykjanes Peninsula with a level of detail previously unattained. Our map reveals a variability in the pattern of normal, oblique- and strike-slip faults and open fractures which reflects both temporal and spatial strain partitioning within the plate boundary zone. Fracture density varies across the length and width of the peninsula, with density maxima at the ends and at the northern margin of the zone of volcanic activity. Fractures with similar strike cluster into distinct structural domains which can be related to patterns of faulting predicted for oblique extension and to their spatial distribution with respect to volcanic fissure swarms. Additional structural complexity on the Reykjanes Peninsula can be reconciled with magmatic periodicity and associated temporal strain partitioning implied by GPS data, as well as locally perturbed stress fields. Individual faults show variable slip histories, indicating that they may be active during both magmatic and amagmatic periods associated with different strain fields.  相似文献   

Net Energy Payback and CO2 Emissions from Three Midwestern Wind Farms: An Update     

Scott W. White 《Natural Resources Research》2006,15(4):271-281

This paper updates a life-cycle net energy analysis and carbon dioxide emissions analysis of three Midwestern utility-scale wind systems. Both the Energy Payback Ratio (EPR) and CO₂ analysis results provide useful data for policy discussions regarding an efficient and low-carbon energy mix. The EPR is the amount of electrical energy produced for the lifetime of the power plant divided by the total amount of energy required to procure and transport the materials, build, operate, and decommission the power plants. The CO₂ analysis for each power plant was calculated from the life-cycle energy input data. A previous study also analyzed coal and nuclear fission power plants. At the time of that study, two of the three wind systems had less than a full year of generation data to project the life-cycle energy production. This study updates the analysis of three wind systems with an additional four to eight years of operating data. The EPR for the utility-scale wind systems ranges from a low of 11 for a two-turbine system in Wisconsin to 28 for a 143-turbine system in southwestern Minnesota. The EPR is 11 for coal, 25 for fission with gas centrifuge enriched uranium and 7 for gaseous diffusion enriched uranium. The normalized CO₂ emissions, in tonnes of CO₂ per GW_eh, ranges from 14 to 33 for the wind systems, 974 for coal, and 10 and 34 for nuclear fission using gas centrifuge and gaseous diffusion enriched uranium, respectively.  相似文献   

吉尔嘎朗图凹陷宝饶洼槽下白垩统层序地层与沉积体系     

易定红  石兰亭  曹正林  贾义蓉  李林波 《华东地质学院学报》2006,29(1):22-26

运用高分辨率层序地层学原理和方法,通过对钻井和地震资料的综合分析,在二连盆地吉尔嘎朗图凹陷下白垩统中识别出1个超长期基准面旋回(二级层序)SSC1和5个长期基准面旋回(三级层序):LSC1,LSC2,LSC3,LSC4,LSC5,分析了各旋回的发育特征。识别出五种类型的沉积体系:滨浅湖近岸水下扇、较深水湖浊积扇、滨浅湖扇三角洲、滨浅湖辫状河三角洲和河流沉积体系,并在等时地层格架内分析了各基准面旋回的沉积体系构成和储层砂体的发育情况。综合分析生、诸、盖条件后认为,在垂向上,LSC3旋回为本区最有利的储集层段,在平面上,本区的油气勘探应主要寻找宝饶构造带辫状河三角洲前缘砂体,主要储层砂体类型为前缘分流水道砂和前缘席状砂。  相似文献   

Influence of Adoptment of Geocentric 3D Coordinate System on Chinese Existent Maps     

CHENJunyong DANGYamin 《地球空间信息科学学报》2005,8(2):79-84

If a geocentric 3D coordinate system is adopted in China to replace 2D non-geocentric coordinate system, the coordinates of the surface points will be changed accordingly. The influences on the current maps of China, especially the topographic maps, are discussed due to the replacement of the coordinate systems. Taking the replacement of Xi‘an 80 coordinate system by GRS80 for a numerical example, this paper analyzes the changes of latitude, longitude, Gauss plane coordinates of the surface points, as well as the orientation and the length changes between the points on the map, including the changes of map border lines and sheet corner points.  相似文献   

北京54坐标转换至WGS-84坐标的方法   总被引：9，自引：0，他引：9  

蔡昌盛高井祥  郑南山张华海 《四川测绘》2005,28(3):125-127,134

本文首先阐述了北京54坐标转换至WGS-84坐标的意义,介绍了北京54坐标转换至WGS-84坐标的实现过程及其方法.最后通过计算江苏省北京54坐标数据和C级GPS网数据对两种坐标转换方法进行了比较分析,并得出了有益的结论.  相似文献