Statistical Detection and Characterization of a Deviation from the Gutenberg-Richter Distribution above Magnitude 8     

V. F. Pisarenko  D. Sornette 《Pure and Applied Geophysics》2004,161(4):839-864

— We present a quantitative statistical test for the presence of a crossover c₀ in the Gutenberg-Richter distribution of earthquake seismic moments, separating the usual power-law regime for seismic moments less than c₀ from another faster decaying regime beyond c₀. Our method is based on the transformation of the ordered sample of seismic moments into a series with uniform distribution under condition of no crossover. A simulation method allows us to estimate the statistical significance of the null hypothesis H₀ of an absence of crossover (c₀=infinity). When H₀ is rejected, we estimate the crossover c₀ using two different competing models for the second regime beyond c₀ and the simulation method. For the catalog obtained by aggregating 14 subduction zones of the Circum-Pacific Seismic Belt, our estimate of the crossover point is log(c₀)=28.14 ± 0.40 (c₀ in dyne-cm), corresponding to a crossover magnitude m_W=8.1 ± 0.3. For separate subduction zones, the corresponding estimates are substantially more uncertain, so that the null hypothesis of an identical crossover for all subduction zones cannot be rejected. Such a large value of the crossover magnitude makes it difficult to associate it directly with a seismogenic thickness as proposed by many different authors. Our measure of c₀ may substantiate the concept that the localization of strong shear deformation could propagate significantly in the lower crust and upper mantle, thus increasing the effective size beyond which one should expect a change of regime.  相似文献   

用热力学第二定律改进MM5V3的初步尝试     

徐辉  柳崇健刘英 《沙漠与绿洲气象(新疆气象)》2004,27(2):7-10

针对当今的数值预报模式中存在若干与热力学第二定律不符的问题，本文着重讨论了将该定律引入数值预报模式的必要性，并通过已引入和未引入第二定律的中尺度数值模式MM5V3两者之间的对比试验来验证在数值预报模式中引进热力学第二定律的可行性。  相似文献   

某滑坡软弱夹层抗剪强度取值方法的研究   总被引：3，自引：0，他引：3  

王义军  李天斌  王宝国 《中国地质灾害与防治学报》2004,15(4):25-29

文章主要针对软弱夹层抗剪强度取值所存在的争议，通过对贵州新街子滑坡的软弱夹层分别选择比例极限、屈服极限及峰值作为剪应力值，采用最小二乘法获得比例抗剪强度、屈服抗剪强度和峰值抗剪强度。以参数选取中应用较为成熟的反分析方法推求力学性质参数c、φ值作为判据对以上3种参数进行比较。计算结果表明：本滑坡软弱夹层中由于含泥量较大，而且粘塑性较强，屈服抗剪强度和反分析得到的抗剪强度偏差最小，比例抗剪强度偏差最大，峰值抗剪强度居中。并以此3种抗剪强度进行天然状态下滑坡稳定性验算，结果表明选用比例极限抗剪强度与当前滑坡的地质现象不符，选用峰值极限抗剪强度安全储备较低，而选取屈服极限抗剪强度最为合理。用此参数进行设计，滑坡已经得到了良好的治理。在取值研究中认为采用试验与反分析相结合的方法确定滑坡稳定性计算参数是比较合理的。以上结论为滑坡中软弱夹层抗剪强度取值的选择提供了重要的依据。  相似文献   

Plastic flow strength of jadeite and diopside investigated by microindentation hardness tests     

Dorothe Dorner  Bernhard Stckhert 《Tectonophysics》2004,379(1-4):227-238

Microindentation hardness tests were performed on jadeite and diopside, being end members of the omphacite solid solution series. At temperatures between 300 and 750 °C, the hardness of jadeite ranges from 7.4 to 8.5 GPa, that of diopside from 4.9 to 6.1 GPa. Jadeite is significantly stronger than diopside in the low-temperature plasticity regime. Normalization of the hardness-derived yield stress with respect to the shear modulus considerably reduces the strength contrast. The normalized Peierls stress is identical for jadeite and diopside. This indicates that jadeite and diopside belong to the same isomechanical group. The hardness-derived yield stress for jadeite as well as for diopside is used to estimate flow law parameters for the low-temperature plasticity regime.  相似文献   

Numerical modelling method for wave propagation in a linear viscoelastic medium with singular memory   总被引：1，自引：0，他引：1  

Jian-Fei Lu  Andrzej Hanyga 《Geophysical Journal International》2004,159(2):688-702

  相似文献   

谈县级地震部门依法管理建设工程抗震设防要求     

武玉柱 《山西地震》2005,(1):27-30

以山西省祁县依法管理工程抗震设防要求为例，论述了强制性审核、确定一般工业、民用建设工程抗震设防要求的重要性及其深远意义。结合工作实际．总结了部分依法行政、规范管理和落实抗震设防要求的经验。  相似文献   

Knickpoint recession rate and catchment area: the case of uplifted rivers in Eastern Scotland   总被引：1，自引：0，他引：1  

Paul Bishop  Trevor B. Hoey  John D. Jansen  Irantzu Lexartza Artza 《地球表面变化过程与地形》2005,30(6):767-778

Knickpoint behaviour is a key to understanding both the landscape responses to a base‐level fall and the corresponding sediment fluxes from rejuvenated catchments, and must be accommodated in numerical models of large‐scale landscape evolution. Knickpoint recession in streams draining to glacio‐isostatically uplifted shorelines in eastern Scotland is used to assess whether knickpoint recession is a function of discharge (here represented by its surrogate, catchment area). Knickpoints are identified using DS plots (log slope versus log downstream distance). A statistically significant power relationship is found between distance of headward recession and catchment area. Such knickpoint recession data may be used to determine the values of m and n in the stream power law, E = KA^mSⁿ. The data have too many uncertainties, however, to judge definitively whether they are consistent with m = n = 1 (bedrock erosion is proportional to stream power and KPs should be maintained and propagate headwards) or m = 0·3, n = 0·7 (bedrock incision is proportional to shear stress and KPs do not propagate but degrade in place by rotation or replacement). Nonetheless, the E Scotland m and n values point to the dominance of catchment area (discharge) in determining knickpoint retreat rates and are therefore more consistent with the stream power law formulation in which bedrock erosion is proportional to stream power. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

On the applicability of KirchofPs law and the principle of heat balance in thermal infrared remote sensing:A non-isothermal system     

ZHANG Renhua  LI Zhaoliang  SUN Xiaomin  ZHU Zhilin & WANG Weimin Institute of Geographical Sciences  Natural Resources Research  Chinese Academy of Sciences  Beijing  China  LSIIT 《中国科学D辑(英文版)》2005,(1)

This paper proposes a basic equation of thermal radiation interaction between surface objects on the basis of the principle of heat balance in the interface. The solution of this equation takes account of the contribution of sensible heat flux and latent heat flux more completely, compared with traditional solution for surface cooling and heating processes. By the aid of the experimental data conducted in the Xiaotangshan experimental site, Beijing, both the non-applicability of Kirchoff's law and the measurability of surface emissivity in a non-isothermal system have been highlighted. Two methods called ventilation and time-delay compensations have been proposed to reduce the error induced by change of surface temperatures of non-isothermal objects during the measurement of emissivity. Based on the solution of the basic equation, this paper has analyzed and pointed out the misunderstanding in comprehension and application of Kirchoff's law published in literature.  相似文献   

Effect of suction on the mechanical behaviour of iron ore rock   总被引：1，自引：0，他引：1  

Dragan Grgic  Richard Giot  Franoise Homand  Albert Giraud 《国际地质力学数值与分析法杂志》2005,29(8):789-827

The effect of suction on the behaviour of iron ore has been studied from both physical and mechanical points of view. The porosity and the suction phenomena have been analysed using different experimental techniques. Uniaxial compressive tests on partially saturated samples have shown that the suction is responsible for strength and cohesion improvement. Considering the theory of partially saturated porous soils of Coussy and Dangla (Mécanique des sols non saturés (2002 edn). Hermès Science: 2002; 390), we have proposed a constitutive law for partially saturated iron ore. The real increase in the apparent cohesion due to the capillary attraction forces is overestimated if the yield function is written in terms of effective stresses. The effect of the capillary cohesion has been modelled with a function in the expression of the apparent cohesion of the yield function. The effect of suction on the mechanical behaviour has been represented in the effective stresses space and in the total stresses space like the Alonso model (Géotechnique 1990; 40 :405–430). Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

An approach to model the mechanical behavior of transversely isotropic materials          下载免费PDF全文

M. Mahjoub  A. Rouabhi  M. Tijani  S. Granet 《国际地质力学数值与分析法杂志》2016,40(6):942-961

The present work proposes an approach to adapt existing isotropic models to transversely isotropic materials. The main idea is to introduce equivalence relations between the real material and a fictitious isotropic one on which one can take all the advantages of the well‐established isotropic theory. Two applications of this approach are presented here: a failure criterion and a damage model that takes into account the load‐induced anisotropy. In both cases, theoretical predictions are in agreement with the experimental data. In the present paper, the developed approach is applied to sedimentary rock materials; nevertheless, it can be generalized to any material that exhibits transverse isotropy. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献