Nonlinear response estimates of RC frames using linear analysis of SDOF systems          下载免费PDF全文

Saman Yaghmaei‐Sabegh  Shabnam Neekmanesh  Elisa Lumantarna 《地震工程与结构动力学》2014,43(5):769-790

An approximate‐simple method for nonlinear response estimates of reinforced concrete frames subjected to near‐field and far‐field records is presented in this paper. The approximate method is based on equivalent single‐degree‐of‐freedom and linear multi‐degree‐of‐freedom models. In this procedure, the nonlinear maximum roof displacement is estimated using an effective period factor and elastic response spectrum with an equivalent damping. The effective period factor was proposed for far‐field and near‐field ground motion records. For regions of high seismicity, the maximum roof displacement can be estimated by applying an effective period factor of 2.3 and 2.1 for near‐field and far‐field records, respectively, and 9% damped displacement response spectrum. For regions of moderate seismicity, a lower effective period factor of 1.9 and 1.8, for near‐field and far‐field records, respectively, can be applied to estimate the maximum roof displacement. A relationship between linear and nonlinear response of multi‐degree‐of‐freedom systems was also proposed to obtain estimates of the maximum inter‐story drift of nonlinear responding reinforced concrete frames. In addition, the effects of number of ground motion records used in the analyses on the scatters of results were investigated. The required number of ground motions to produce a reliable response was proposed. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Performance of base‐isolated reinforced concrete buildings under bidirectional seismic excitation considering pounding with retaining walls including friction effects          下载免费PDF全文

Deepak R. Pant  Anil C. Wijeyewickrema 《地震工程与结构动力学》2014,43(10):1521-1541

Seismic pounding of base‐isolated buildings has been mostly studied in the past assuming unidirectional excitation. Therefore, in this study, the effects of seismic pounding on the response of base‐isolated reinforced concrete buildings under bidirectional excitation are investigated. For this purpose, a three‐dimensional finite element model of a code‐compliant four‐story building is considered, where a newly developed contact element that accounts for friction and is capable of simulating pounding with retaining walls at the base, is used. Nonlinear behavior of the superstructure as well as the isolation system is considered. The performance of the building is evaluated separately for far‐fault non‐pulse‐like ground motions and near‐fault pulse‐like ground motions, which are weighted scaled to represent two levels of shaking viz. the design earthquake (DE) level and the risk‐targeted maximum considered earthquake (MCE_R) level. Nonlinear time‐history analyses are carried out considering lower bound as well as upper bound properties of isolators. The influence of separation distance between the building and the retaining walls at the base is also investigated. It is found that if pounding is avoided, the performance of the building is satisfactory in terms of limiting structural and nonstructural damage, under DE‐level motions and MCE_R‐level far‐fault motions, whereas unacceptably large demands are imposed by MCE_R‐level near‐fault motions. In the case of seismic pounding, MCE_R‐level near‐fault motions are found to be detrimental, where the effect of pounding is mostly concentrated at the first story. In addition, it is determined that considering unidirectional excitation instead of bidirectional excitation for MCE_R‐level near‐fault motions provides highly unconservative estimates of superstructure demands. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Sensitivity of interfacial hydraulics to the microtopographic roughness of water‐lain gravels          下载免费PDF全文

Stephen P. Rice  Thomas Buffin‐Bélanger  Ian Reid 《地球表面变化过程与地形》2014,39(2):184-199

Flow within the interfacial layer of gravel‐bed rivers is poorly understood, but this zone is important because the hydraulics here transport sediment, generate flow structures and interact with benthic organisms. We hypothesized that different gravel‐bed microtopographies generate measurable differences in hydraulic characteristics within the interfacial layer. This was tested using a high density of spatially and vertically distributed, velocity time series measured in the interfacial layers above three surfaces of contrasting microtopography. These surfaces had natural water‐worked textures, captured in the field using a casting procedure. Analysis was repeated for three discharges, with Reynolds numbers between 165000 and 287000, to evaluate whether discharge affected the impact of microtopography on interfacial flows. Relative submergence varied over a small range (3.5 to 8.1) characteristic of upland gravel‐bed rivers. Between‐surface differences in the median and variance of several time‐averaged and turbulent flow parameters were tested using non‐parametric statistics. Across all discharges, microtopographic differences did not affect spatially averaged (median) values of streamwise velocity, but were associated with significant differences in its spatial variance, and did affect spatially averaged (median) turbulent kinetic energy. Sweep and ejection events dominated the interfacial region above all surfaces at all flows, but there was a microtopographic effect, with Q2 and Q4 events less dominant and structures less persistent above the surface with the widest relief distribution, especially at the highest Reynolds number flow. Results are broadly consistent with earlier work, although this analysis is unique because of the focus on interfacial hydraulics, spatially averaged ‘patch scale’ metrics and a statistical approach to data analysis. An important implication is that observable differences in microtopography do not necessarily produce differences in interfacial hydraulics. An important observation is that appropriate roughness parameterizations for gravel‐bed rivers remain elusive, partly because the relative contributions to flow resistance of different aspects of bed microtopography are poorly constrained. © 2014 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd.  相似文献   

基于累积偏移算法的线路矢量数据实时压缩     

王飞  曾燕  赵小波  刘胤田 《地球信息科学学报》2014,16(2):173-181

针对线路矢量数据实时采集和同步压缩应用需求,本文提出具有高压缩率、低失真度特点的累积偏移实时压缩算法（CORC Algorithm）。算法突出对弯曲极值点和距离偏移的感知,创新性地提出累积变向点和累积变向拐点的弯曲极值点探测方法,提出距离累积偏移临界点的线路偏移快速判断方法,从而有效提高算法对方向连续偏移的敏感度和对摇摆偏移的高压缩率,提高线路矢量数据实时压缩的高保真性。累积偏移实时压缩算法在高限差阈值情况下仍能有效发现各类弯曲极值点和距离累积偏移临界点,在O（N）时间复杂性和O（1）空间复杂性下取得高压缩率、低失真度的理想压缩效果,实现了线路采集的零延时同步压缩。应用定时、定距两种采集策略生成的线路矢量数据集,与垂距法（VD Algorithm）、分段道格拉斯-普克法（Subsection DP Algorithm）进行实时压缩性能实验对比,结果表明,累积偏移法作为实时压缩方法,与上述两种主流实时压缩算法相比,在压缩实时性、压缩率失真度平衡、限差阈值可控性3方面都具有明显的优越性。在同等压缩率情况下,累积偏移压缩算法失真度普遍降低达10%,且压缩率与失真度的平衡性受限差阈值取值和线路轨迹特征影响最小,可实现线路的定位采集、实时压缩、同步网络上传,在交通、旅游、探险搜救等领域的实时定位监控中具有广阔的应用前景。  相似文献   

抛物Radon变换法近偏移距波场外推   总被引：14，自引：8，他引：6       下载免费PDF全文

王维红  刘洪 《地球物理学进展》2005,20(2):289-293

本文给出了抛物Radon变换的基本原理,以及部分动校正后的CMP道集抛物线近似有效性的证明,基于带限正反最小平方抛物Radon变换的Levinson递推算法,对缺失的近偏移距地震波场进行叠前重建和外推.给出了抛物Radon变换法地震道重建外推的基本原理和叠前地震数据规则化的处理流程,另外对于Radon域均匀采样的情形,本文给出了均匀层状介质和Marmousi模型的近偏移距外推结果,计算结果验证了算法的稳定性和适用性.  相似文献   

大规模地形实时绘制算法   总被引：8，自引：3，他引：5  

朱军  龚建华  齐华  曹振宇 《地理与地理信息科学》2005,21(2):24-27

该文提出一种适合大规模地形实时绘制的简单高效的LOD简化算法。该算法使用一种紧凑有效的规则网格表示方法,优化网格节点的数目,减少可视化过程中的计算量,降低额外内存开销。探讨该算法相关的数据组织、视域裁剪、LOD层次选择、裂缝消除、三角形化等关键问题。实验结果表明,该算法实现简单,内存开销较少,CPU耗费小,对图形卡要求低,能够在普通机器上实现大规模地形的实时漫游。  相似文献   

SEED格式STEIM2数据压缩算法在实时地震数据传输中的应用   总被引：9，自引：1，他引：8  

王洪体  陈阳  庄灿涛 《地震地磁观测与研究》2004,25(4):14-19

在一定带宽内,及时、高效、无失真地传输地震数据是地震数据传输的基本要求,SEED格式给出的数据格式在数据压缩方面有其独到之处,但SEED格式没有定义数据正确性和完整性保证机制和检验方法,因而影响实时传输中的使用。本文提出一种基于SEED格式的STEIM2数据压缩算法,同EDAS数据包形式兼容的实时压缩数据包编码方法,来实现实时压缩数据的传输。经理论评估和实际数据检验,它容易实现,效率高,安全,可靠,完全可以应用于实时数据传输。  相似文献   

Altimeter Signal-to-Noise for Deep Ocean Processes in Operational Systems     

KIRK R. WHITMER  GREGG A. JACOBS  OLE MARTIN SMEDSTAD 《Marine Geodesy》2013,36(3-4):433-451

The ocean signal for this study is the sea surface height due to the slowly varying (greater than 5-day) ocean processes, which are predominantly the deep ocean mesoscale. These processes are the focus of present assimilation systems for monitoring and predicting ocean circulation due to ocean fronts and eddies and the associated environmental changes that impact real time activities in areas with depths greater than about 200 m. By this definition, signal-to-noise may be estimated directly from altimeter data sets through a crossover point analysis. The RMS variability in crossover differences is due to instrument noise, errors in environmental corrections to the satellite observation, and short time period oceanic variations. The signal-to-noise ratio indicates that shallow areas are typically not well observed due to the high frequency fluctuations. Many deep ocean areas also contain significant high frequency variability such as the subpolar latitudes, which have large atmospheric pressure systems moving through, and these in turn generate large errors in the inverse barometer correction. Understanding the spatial variations of signal to noise is a necessary prerequisite for correct assimilation of the data into operational systems.  相似文献   

��ƵGPSʵʱ�������������     

郭爱智  王勇  刘根友  郑晖  张茂顺 《大地测量与地球动力学》2013,33(5):34-38

?????????????λ??????????????????????????????????t??????????????????????????????????????????????????λ?????GPS????????????????????????????mm/s?????????????1 cm/s??  相似文献   

An efficient method of noroviruses recovery from oysters and clams     

ZHOU Deqing  MA Liping  ZHAO Feng  YAO Lin  SU Laijin  LI Xinguang 《中国海洋大学学报(英文版)》2013,12(1):85-90

Noroviruses (NoVs) are widespread causes of nonbacterial gastroenteritis. Outbreaks of NoVs caused diseases are commonly ascribed to the consumption of contaminated shellfish. The concentration and RNA extraction of NoVs are crucial steps of detecting NoVs in shellfish. This study aimed to select a simple, rapid and highly efficient recovery method of NoVs detection with real-time RT-PCR. Four methods of recovering GI.3 and GII.4 NoVs from spiked digestive tissues of oysters and clams, respectively, were compared, of them, the method involving proteinase K and PEG 8000 was found the most efficient. With this method, 9.3% and 13.1% of GI.3 and GII.4 NoVs were recovered from oysters and 9.6% and 12.3% of GI.3 and GII.4 NoVs were recovered from clams, respectively. This method was further used to detect NoVs in 84 oysters (Crassostrea gigas) and 86 clams (Ruditapes philippinarum) collected from 10 coastal cities in China from Jan. 2011 to Feb. 2012. The NoVs isolation rates were 10.47% of clams (9/86) and 7.14% of oysters (6/84). All the detected NoVs belonged to genotype GII. The NoVs recovery method selected is efficient for NoVs detection in oysters and clams.  相似文献