资源勘查图件计算机辅助编绘系统的结构分析与开发策略研究   总被引：7，自引：1，他引：7  

刘刚  汪新庆等 《地质与勘探》2002,38(4):60-63

如何站在信息系统的高度来进行资源图件计算机辅助编绘系统的快速开发，是资源信息系统领域计算机应用的一个重要研究课题。在结构分析的基础上，将资源图件计算机辅助编绘系统划分为图形数据库，应用图形系统和基础图形系统3个基本部分。对于复杂资源图件的计算机辅助编绘，需要地矿点源信息系统的支持。在基础图形系统上进行专业编绘程序的二次开发是高效建立图件编绘系统的最佳途径，并需注意GIS集成应用，三维可视化，人工智能和参数化设计等方法的运用，而系统平台开发是复杂应用的高级阶段。该思想可应用于煤及油气勘探，工程开发，矿区管理及区域地质等诸多领域的软件开发中。  相似文献   

三峡库区滑坡治理工程设计中推力荷载计算方法初探     

潘伟  赵欣  谭建民 《地质灾害与环境保护》2002,13(4):70-72

随着三峡水利工程的逐步实施，淹没区移民及新城镇建设等人类工程活动的加剧，以滑坡为主的环境地质问题日益突出。本文从稳定系数、安全系数入手，对铁道、公路等部门常用的设计计算原理进行了研究，并由此类比分析研究了三峡区回水后或库水位正常运行条件下，滑坡治理工程设计计算方法。  相似文献   

Optimum multiple tuned mass dampers for structures under the ground acceleration based on DDMF and ADMF     

Chunxiang Li 《地震工程与结构动力学》2002,31(4):897-919

Multiple tuned mass dampers (MTMD) consisting of many tuned mass dampers (TMDs) with a uniform distribution of natural frequencies are taken into consideration for attenuating undesirable vibration of a structure under the ground acceleration. A study is conducted to search for the preferable MTMD which performs better and is easily manufactured from the five available models (i.e. MTMD‐1 – MTMD‐5), which comprise various combinations of the stiffness, mass, damping coefficient and damping ratio in the MTMD. The major objective of the present study then is to evaluate and compare the control performance of these five models. The structure is represented by its mode‐generalized system in the specific vibration mode being controlled by adopting the mode reduced‐order approach. The optimum parameters of the MTMD‐1 – MTMD‐5 are investigated to reveal the influence of the important parameters on their effectiveness and robustness using a numerical searching technique. The parameters include the frequency spacing, average damping ratio, tuning frequency ratio, mass ratio and total number. The criteria selected for the optimum searching are the minimization of the maximum value of the displacement dynamic magnification factor (DDMF) and that of the acceleration dynamic magnification factor (ADMF) of the structure with the MTMD‐1 – MTMD‐5 (i.e. Min.Max.DDMF and Min.Max.ADMF). It is demonstrated that the optimum MTMD‐1 and MTMD‐4 yield approximately the same control performance, and offer higher effectiveness and robustness than the optimum MTMD‐2, MTMD‐3, and MTMD‐5 in reducing the displacement and acceleration responses of structures. It is further demonstrated that for both the best effectiveness and robustness and the simplest manufacturing, it is preferable to select the optimum MTMD‐1. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Optimal design of passive energy dissipation systems based on H∞ and H2 performances     

J. N. Yang  S. Lin  J‐H. Kim  A. K. Agrawal 《地震工程与结构动力学》2002,31(4):921-936

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Numerical evaluation of the damping‐solvent extraction method in the frequency domain     

Ushnish Basu  Anil K. Chopra 《地震工程与结构动力学》2002,31(6):1231-1250

The damping‐solvent extraction method for the analysis of unbounded visco‐elastic media is evaluated numerically in the frequency domain in order to investigate the influence of the computational parameters—domain size, amount of artificial damping, and mesh density—on the accuracy of results. An analytical estimate of this influence is presented, and specific questions regarding the influence of the parameters on the results are answered using the analytical estimate and numerical results for two classical problems: the rigid strip and rigid disc footings on a visco‐elastic half‐space with constant hysteretic material damping. As the domain size is increased, the results become more accurate only at lower frequencies, but are essentially unaffected at higher frequencies. Choosing the domain size to ensure that the static stiffness is computed accurately leads to an unnecessarily large domain for analysis at higher frequencies. The results improve by increasing artificial damping but at a slower rate as the total (material plus artificial) damping ratio ζ_t gets closer to 0.866. However, the results do not deteriorate significantly for the larger amounts of artificial damping, suggesting that ζ_t≈0.6 is appropriate; a larger value is not likely to influence the accuracy of results. Presented results do not support the earlier suggestion that similar accuracy can be achieved by a large bounded domain with small damping or by a small domain with larger damping. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Towards a direct collapse–load method of design for concrete frames subjected to severe ground motions     

M. C. Griffith  A. Kawano  R. F. Warner 《地震工程与结构动力学》2002,31(10):1879-1888

Most current methods of design for concrete structures under earthquake loads rely on highly idealized ‘equivalent’ static representations of the seismic loads and linear‐elastic methods of structural analysis. With the continuing development of non‐linear methods of dynamic analysis for the overload behaviour and collapse of complete concrete structures, a more direct and more accurate design procedure becomes possible which considers conditions at system collapse. This paper describes an evaluation procedure that uses non‐linear dynamic collapse–load analysis together with global safety coefficients. A back‐calibration procedure for evaluating the global safety coefficients is also described. The aim of this paper is to open up discussion of alternative methods of design with improved accuracy which are necessary to move towards a direct collapse–load method of design. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

DEM在公路设计中的应用     

张耀波 《安徽地质》2002,12(3):215-219

根据公路部门的实际工作,利用数字高程模型这一新的数字地理信息产品,采用空间分析的一些方法,应用AMI语言,对公路设计和施工中断面图的绘制、挖、填方量的计算等一些实际问题进行探讨和实践,并在此基础上构建了<宣芜高速公路设计应用示范系统>.  相似文献   

粉喷桩技术加固软土地基   总被引：3，自引：0，他引：3  

郝加和  程华龙 《安徽地质》2002,12(4):282-285,292

简介了水泥粉体喷射搅拌加固软土地基的工作机理,结合沪蓉高速公路(沪宁段)地基处理实践,论述了粉喷桩加固软土地基的计算方法.采用粉喷桩加固软基,可加快路堤填土速率,铺筑路面后的工后沉降量能得到有效地控制,保证了工程质量.  相似文献   

用翁氏模型图版设计早期油气田(藏)开发方案     

龚久和  冯文光 《矿物岩石》2002,22(4):75-77

由于缺乏早期资料，设计早期油气田（藏）开发方案是非常困难的。在制作翁氏模型的Qctm/No-ER图版和ER-ctR图版过程提出根据探明储量No、经济极限产量Qc、假定达到峰值产量的时间tm、最终采收率ER，由翁氏模型的Qctm/No-ER图版求取增长指数b，由翁氏模型ER-ctR图版求取ctR，再求出其他参数及所有的油气田（藏）开发指标，完成早期油气田（藏）开发方案设计。  相似文献   

X射线衍射峰五基本要素的物理学意义与应用   总被引：6，自引：0，他引：6  

周健  王河锦 《矿物学报》2002,22(2):95-100

本文根据Bragg衍射方程、Scherrer方程、衍射强度计算原理，研究讨论了X射线衍射5构成要素中的衍射峰位置、衍射峰宽度、衍射峰高度的物理学意义。根据实验研究证明了衍射峰不对称性的几何条件特征，并用地质事实验证了衍射形态变化与晶格应变和粒度大小的内在联系。从而阐明了单个衍射峰5基本构成要素的完整物理学意义，并以实例论证了5要素的实际应用价值。  相似文献