准时间可预报复发行为与断裂带分段发震概率估计   总被引：7，自引：0，他引：7  

闻学泽 《中国地震》1993,9(4):289-300

反不确定性引入“时间可预报模式”，可将一次地震之后的平静时间表示成与这次地震位错量在小呈正相关的随机变量。称这种带有不确定性的地震原地复发行为为“准时间可预报行为”。对于历史地震资料，准时间可预报复发行为可由地震后平静时间的对数与地震烈度的回归方程。文中给出了估计一条枯断裂带不同段落以上一次地震烈度值为背景的平均复发时间间隔的方法，以及可用 于对未来地震潜势进行不确定评价的实时概率模型，并以鲜水河  相似文献   

嘉峪关光化楼残损变形现状及抗震性能分析     

巴振宁  焦鹏  张龙  刘冰松  张翔 《震灾防御技术》2020,15(2):293-304

中国木结构建筑是我国宝贵的物质文化遗产和文化瑰宝，具有悠久的文化历史。以嘉峪关光化楼为依托，对光化楼进行实地调研，分析光化楼主要残损变形。采用ANSYS软件建立考虑光化楼残损变形的三维有限元精细模型，并进行模态分析与时程分析。研究结果表明，光化楼主要残损变形为油饰脱落、墙体剥蚀开裂、柱偏移等，极个别柱产生较大偏移；光化楼刚度相对稳定，前20阶振型自振频率均在10Hz以内；光化楼动力放大系数与层间位移角均较小，仍具有良好的抗震减震性能。  相似文献   

Synthetic Experiments Dealing with Anisotropic Model Building     

Bakker  P. M. 《Studia Geophysica et Geodaetica》2002,46(4):773-792

It has been shown in the past that the interval-NMO velocity and the non-ellipticity parameter largely control the P-wave reflection time moveout of VTI media. To invert for these two parameters, one needs either reasonably large offsets, or some structure in the subsurface in combination with relatively mild lateral velocity variation.This paper deals with a simulation of an inversion approach, building on the assumption that accurately measured V _NMO, as defined by small offset asymptotics for a particular reflector, were available. Instead of such measurements we take synthetically computed data. First, an isotropic model is constructed which explains these V _NMO. Subsequently, residual moveout in common image gathers is modelled by ray tracing (replacing real data), along with its sensitivity for changes in the interval-NMO velocity and the non-ellipticity parameter under the constraint that V _NMO is preserved. This enables iterative updating of the non-ellipticity parameter and the interval-NMO velocity in a layer that can be laterally inhomogeneous.This approach is successfully applied for a mildly dipping reflector at the bottom of a layer with laterally varying medium parameters. With the exact V _NMO assumed to be given, lateral inhomogeneity and anisotropy can be distinguished for such a situation. However, for another example with a homogeneous VTI layer overlying a curved reflector with dip up to 30°, there appears to be an ambiguity which can be understood by theoretical analysis. Consistently with existing theory using the NMO-ellipse, the presented approach is successfully applied to the latter example if V _NMO in the strike direction is combined with residual moveout in dip direction.  相似文献   

地震安全性评价和高层建筑的地震动输入   总被引：4，自引：1，他引：3  

杨柏坡  窦立军 《地震工程与工程振动》2000,20(1):35-41

本文根据现行的中国地震烈度区划图中烈度的含义,指出在使用现行“建筑抗震设计规范”时存在的一些问题和与《中华人民共和国防震减灾法》的不协调之处。根据多年参加工程场地地震安全性评价的经验,总结了目前进行地震安全性评价过程中存在的一些问题。文中建议：针对高层建筑进行新的场地分类方法的研究;对高层建筑工程场地作地震安全性评价时,可根据高度的不同,适当简化安全性评价过程。  相似文献   

Pre‐ and post‐test mathematical modelling of a plan‐asymmetric reinforced concrete frame building     

Peter Fajfar  Matja Dol&#x;ek  Damjan Maru&#x;i&#x;  Aurel Stratan 《地震工程与结构动力学》2006,35(11):1359-1379

Pre‐ and post‐test analyses of the structural response of a three‐storey asymmetric reinforced concrete frame building were performed, aimed at supporting test preparation and performance as well as studying mathematical modelling. The building was designed for gravity loads only. Full‐scale pseudo‐dynamic tests were performed in the ELSA laboratory in Ispra. In the paper the results of initial parametric studies, of the blind pre‐test predictions, and of the post‐test analysis are summarized. In all studies a simple mathematical model, with one‐component member models with concentrated plasticity was employed. The pre‐test analyses were performed using the CANNY program. After the test results became available, the mathematical model was improved using an approach based on a displacement‐controlled analysis. Basically, the same mathematical model was used as in pre‐test analyses, except that the values of some of the parameters were changed. The OpenSees program was employed. Fair agreement between the test and numerical results was obtained. The results prove that relatively simple mathematical models are able to adequately simulate the detailed seismic response of reinforced concrete frame structures to a known ground motion, provided that the input parameters are properly determined. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

基于Hough变换的建筑物半自动提取   总被引：1，自引：0，他引：1  

周俊  吉小刚  郑战辉 《测绘科学技术学报》2006,23(5):345-347

提出了一种基于Hough变换的建筑物半自动提取方法.该方法针对由人工给定建筑物的初始角点并通过统计屋顶主方向对Hough变换的搜索范围和搜索角度进行限制,从而稳定快速地提取出屋顶的边缘.然后利用最小二乘的方法对提取出的屋顶边缘进行精确对中,实现了对平顶直角建筑物以及人字形建筑物的有效提取.  相似文献   

融合区域分割和边缘信息的居民地提取方法   总被引：4，自引：0，他引：4  

潘励  张志华  张剑清 《武汉大学学报(信息科学版)》2006,31(8):671-674

提出了一种集成边缘和区域分割信息的目标识别方法，其目的是在中小比例尺的航空影像中提取集团式居民地。在实际的航空影像上的实验表明，融合区域分割和边缘信息能够提高居民地提取的准确率。  相似文献   

应用基础隔震技术的建筑工程造价分析     

郭起剑  姜莹  战松梅 《世界地震工程》2006,22(4):116-120

应用叠层橡胶支座进行基础隔震是目前国内外大力推广的一门建筑抗震新技术。但由于对采用隔震技术后建筑物的工程造价是否会增加缺乏具体的经济技术指标,使得建筑开发商对其推广应用一直持保守态度。选择了位于VIII度区的两个典型工程实例(一例为乙类建筑,另一例为丙类建筑),简要分析了同一建筑物采取不同设计方案(不隔震但抗震设防、隔震使实际设防水平提高、隔震后与未隔震建筑保持相同设防水平等三种不同设计方案)对工程造价的影响及差异。分析数据表明,在同等设防烈度下,基础隔震技术的合理应用可以使被隔震建筑的工程造价与同条件只采用抗震设防的建筑工程造价适当降低。  相似文献   

A comparative study of the design spectra defined by Eurocode 8, UBC, IBC and Turkish Earthquake Code on R/C sample buildings     

Adem Doğangün  Ramazan Livaoğlu 《Journal of Seismology》2006,10(3):335-351

Earthquake codes have been revised and updated depending on the improvements in the representation of ground motions, soils and structures. These revisions have been more frequently seen in recent years. One of the key changes in earthquake codes has been performed on the design spectra. In this paper, the design spectra recommended by Turkish Earthquake Code and three other well known codes (Uniform Building Code, Eurocode 8, and International Building Code) are considered for comparison. The main purpose of this study is to investigate the differences caused by the use of different codes in the dynamic analysis and seismic verification of given types of buildings located at code defined different sites. The differences in expressions and some important points for elastic and inelastic spectra defined by the codes are briefly illustrated in tables and figures. Periods, base shears, lateral displacements and interstory drifts for the analyzed buildings located at code defined ground type are comparatively presented.  相似文献   

Rescue Operations and Demolition Works: Automating the Pneumatic Removal of Small Pieces of Rubble and Combination of Suction Plants with Demolition Machines     

S. Gentes 《Bulletin of Earthquake Engineering》2006,4(2):193-205

The main problem in the rescue of people buried alive in damaged buildings are pieces of rubble with a diameter less than 150 mm. Since they cover the whole site, it is neither possible to scrutinize the structure of the rubble nor to estimate the dimensions of beams, columns, and parts of ceilings. The central idea of a project at the University of Karlsruhe, Institute for Technology and Management in Construction, is the automatic removal of small pieces of rubble by a suction unit. The computer-controlled pipe which is fastened to the boom of an excavator automatically follows the structure of the heap of rubble. Therefore, it can also work in areas which are out of the driver’s visible range. The suction plant replaces the dangerous manual removal which is current standard. Furthermore, a pneumatic extraction system has been designed and constructed in combination with demolition machinery, e.g. crushers and dry wire-saw technologies, to immediately suck off the crushed material (reinforced concrete, masonry).  相似文献