Simulation of flow over pool-riffle topography: A consideration of the velocity reversal hypothesis     

P. A. Carling  N. Wood 《地球表面变化过程与地形》1994,19(4):319-332

Computer flow simulations using the HEC-2 step-backwater routine are used to demonstrate the effect of systematically varying river channel width, riffle spacing and channel roughness on the shear velocity, section-mean velocity and energy slope in fixed-bed pool-riffle sequences. Initial scaling is obtained by utilizing published information on hydraulic parameters within reaches of the River Severn. Subsequently this restriction is relaxed and the effect of varying parameter combinations within realistic limits is explored. The purpose of this exercise is to isolate those scenarios which may preclude or promote the occurrence of a competence ‘reversal’, such that pools scour at high flow whilst deposition occurs on riffles. It is concluded that rivers in which pools are hydraulically rougher than riffles are likely to demonstrate a competence reversal. For prescribed conditions, the critical discharge at which a reversal occurs is a negative function of riffle spacing and riffle width relative to pool width. Downstream variation in hydraulic roughness also has implications for the phase relationship of shear velocity maxima and minima in relation to the extremes in pool-riffle topography.  相似文献   

Geophysical analysis of zonal tidal signals in length of day   总被引：5，自引：0，他引：5  

Benjamin Fong Chao  James B. Merriam  Yoshiaki Tamura 《Geophysical Journal International》1995,122(3):765-775

  相似文献   

应用地震资料设计水平井轨迹     

刘福贵  刘传虎 《地球物理学进展》1993,8(3):122-131

应用三维地震资料设计水平井的轨迹,用人工合成记录标定层位和岩性并进行精细的构造解释和储层横向预测,对测区速度场进行研究,利用Geoquest 人机联作解释系统编绘层拉平图、转弯测线剖面图,不整合面构造图,各套油层顶面构造图,沿地层倾向设计水平井的轨迹.经两口井钻探,钻遇不整合面的误差0.19%—0.39%,一口井平均钻遇油层204m,相当9口直井的效益.用地震资料设计巷道水平井的关键是油层标定、深度标定和确定油层走向,用人机联作系统绘制水平切片图、反射波振幅图、油层顶构造图,设计了在油层内钻探的巷道井.经钻探,钻遇不整合面的误差0.07%,在真厚度8.23m 的油层内钻进563m.  相似文献   

跃变型扩散的实验研究          下载免费PDF全文

张霭琛  刘树华  叶文虎 《大气科学》1993,17(1):39-43

本文为一次沿海岸边翻越二维山丘的扩散实验.结果表明:在一定条件下,假若两层空气的湍流强度和尺度的比值不大,当烟羽从上层侵入到下层较强混合气层时,不一定产生燻烟型扩散,仅表现为扩散参数在一定水平距离上的跃变.本文同时介绍了两组风洞实验的结果,其目的在于说明扩散参数跃变存在的事实.  相似文献   

A simple method of estimating rock mass porosity and permeability     

Cheng Haw Lee  Ian. W. Farmer 《Geotechnical and Geological Engineering》1990,8(1):57-65

Conclusion A simple method of estimating fracture porosity and permeability based on empirical relations between fracture aperture andJRC andJCS can be developed. This shows very close correlation with existing data, using simple discontinuity models. There is quite a good correlation between fracture porosity and permeability and depth for larger initial apertures.  相似文献   

Fractal properties of simulated bed profiles in coarse-grained channels   总被引：2，自引：0，他引：2  

André Robert 《Mathematical Geology》1991,23(3):367-382

Bed roughness characteristics in coarse-grained channels are fairly complex. A hierarchy of roughness elements can be observed, ranging from variable particle sizes and shapes and small-scale sedimentary structures, to large-scale bedforms such as riffle-pool sequences. The effects of these scales of roughness on the flow geometry still remain to be thoroughly investigated. The semivariogram has been suggested in the past as a means of quantifying bed roughness effects on streamflow, as well as for distinguishing between scales of roughness. However, field measurements are rather time-consuming. The low number of bed profiles measured in the field precludes the identification of generally applicable relationships between the statistical properties derived from the semivariograms (such as the Hausdorff dimensions and the scale of autocorrelation corresponding to each fractal band) and the bed configuration itself (geometrical and sedimentological properties). Simulation results of gravel-bed profiles are, therefore, presented in order to complement the original investigation of Robert (1988a). The simulation experiments, based on grain characteristics of sizes and shapes and on morphological properties of small-scale bedforms, yield very significant information on boundary roughness at the microscale and give insight into the interpretation of empirical semivariograms (derived from field measurements). Bed-material sorting, variable grain shapes, and height and spacing of cluster bedforms control the fractal dimensions obtained from the semivariograms, as well as the location of the break of slope and the range of the process.  相似文献   

1500年宜良地震地表形变带的考证   总被引：2，自引：0，他引：2  

俞维贤  申旭辉 《地震研究》1995,18(4):405-411

据历史记载１５００年在宜良一带发生了一次强烈地震，由前人对该次地震无较详细的现 场实地考查资料，因此对这次地震认识说法不一。１９９２年作者对该次地震进行了实地考证。发现和确认了这次地震十分丰富的地震地表形变带，现存长度达８１公里，最大左旋水平位错量９至１１米。研究结果表明该次地震的发震构造为小新街－徐家渡断裂，震级接近８级。  相似文献   

Modeling forced pool–riffle hydraulics in a boulder-bed stream, southern California     

Lee R. Harrison  Edward A. Keller 《Geomorphology》2007,83(3-4):232-248

The mechanisms which control the formation and maintenance of pool–riffles are fundamental aspects of channel form and process. Most of the previous investigations on pool–riffle sequences have focused on alluvial rivers, and relatively few exist on the maintenance of these bedforms in boulder-bed channels. Here, we use a high-resolution two-dimensional flow model to investigate the interactions among large roughness elements, channel hydraulics, and the maintenance of a forced pool–riffle sequence in a boulder-bed stream. Model output indicates that at low discharge, a peak zone of shear stress and velocity occurs over the riffle. At or near bankfull discharge, the peak in velocity and shear stress is found at the pool head because of strong flow convergence created by large roughness elements. The strength of flow convergence is enhanced during model simulations of bankfull flow, resulting in a narrow, high velocity core that is translated through the pool head and pool center. The jet is strengthened by a backwater effect upstream of the constriction and the development of an eddy zone on the lee side of the boulder. The extent of flow convergence and divergence is quantified by identifying the effective width, defined here as the width which conveys 90% of the highest modeled velocities. At low flow, the ratio of effective width between the pool and riffle is roughly 1:1, indicating little flow convergence or divergence. At bankfull discharge, the ratio of effective width is approximately 1:3 between the pool and downstream riffle, illustrating the strong flow convergence at the pool head. The effective width tends to equalize again with a ratio of 1:1 between the pool and riffle during a modeled discharge of a five-year flood, as the large roughness elements above the pool become drowned out. Results suggest that forced pool–riffle sequences in boulder-bed streams are maintained by flows at or near bankfull discharge because of stage-dependent variability in depth-averaged velocity and tractive force.  相似文献   

Seismic Hazard Analysis for the Bangalore Region     

T. G. Sitharam  P. Anbazhagan 《Natural Hazards》2007,40(2):261-278

Indian peninsular shield, which was once considered to be seismically stable, is experiencing many earthquakes recently. As part of the national level microzonation programme, Department of Science and Technology, Govt. of India has initiated microzonation of greater Bangalore region. The seismic hazard analysis of Bangalore region is carried out as part of this project. The paper presents the determination of maximum credible earthquake (MCE) and generation of synthetic acceleration time history plot for the Bangalore region. MCE has been determined by considering the regional seismotectonic activity in about 350 km radius around Bangalore city. The seismotectonic map has been prepared by considering the faults, lineaments, shear zones in the area and historic earthquake events of more than 150 events. Shortest distance from the Bangalore to the different sources is measured and then peak ground acceleration (PGA) is calculated for the different source and moment magnitude. Maximum credible earthquake found in terms of moment magnitude is 5.1 with PGA value of 0.146 g at city centre with assuming the hypo central distance of 15.88 km from the focal point. Also, correlations for the fault length with historic earthquake in terms of moment magnitude, yields (taking the rupture fault length as 5% of the total fault length) a PGA value of 0.159 g. Acceleration time history (ground motion) and a response acceleration spectrum for the corresponding magnitude has been generated using synthetic earthquake model considering the regional seismotectonic parameters. The maximum spectral acceleration obtained is 0.332 g for predominant period of 0.06 s. The PGA value and synthetic earthquake ground motion data from the identified vulnerable source using seismotectonic map will be useful for the PGA mapping and microzonation of the area.  相似文献   

Phases Representing Source Lengths of Tsunami in Tide Gauge Records     

Kuniaki Abe 《Pure and Applied Geophysics》2007,164(2-3):453-463

We identified a phase representing the source length of tsunami's in the tide gauge records around Japan. This phase was observed at tide stations, located in the direction of the long axis of the sources, for four large tsunamis: 1964 Niigata, 1968 Tokachi-oki, 1983 Nihonkaichubu, and 1993 Hokkaido-nanseioki. The phase consists of two continuous crests starting as the initial arrival and has a time length of 15–47 minutes. This is the time required to propagate across the source area along the long axis. Strong evidence that the phase is generated at the source is the good correlation between waveform observed at one side and time-inversed waveform at another side. The correlation results from the instantaneous generation of the source. The source lengths of 74–254 km were obtained under an assumption of sea depths at the sources and verified to coincide with ones within a relative error of 15% that were previously obtained by other methods.  相似文献