双参数云物理方案中谱形参数作用分析和数值模拟试验   总被引：2，自引：0，他引：2  

赵震  雷恒池 《高原气象》2008,27(1):135-142

云物理参数化方案中,各种粒子通常采用Г谱分布函数n(D)=N0Dαexp(-λD)。双参数方案中谱参数截距N0和斜率λ通过预报给出,谱形参数α设为固定值。为了讨论谱形参数的作用,理论上分析了谱形参数取值对沉降过程和微物理源汇项的影响。利用MM5模式中增加的双参数显式云物理方案模拟了西北地区一次层状云降水过程,模拟针对雨滴谱的谱形参数rα不同取值分别做了试验。模拟结果基本符合理论分析,谱形参数rα变化时模拟出的地面降水和云的宏微观特征有差异。  相似文献   

How soil texture,channel shape and cross-sectional area affect moisture dynamics and water loss in irrigation channels     

Zhifan Mu  Tianxiao Li  Dong Liu  Qiang Fu  Renjie Hou  Qinglin Li  Yi Ji  Song Cui  Mo Li 《水文研究》2021,35(4):e14155

To enhance the utilization efficiency of farmland irrigation water and reduce the leakage of water conveyance channels, the leakage process of channels was simulated dynamically. The simulated results were compared with data measured in laboratory experiments, and the performance of the model was evaluated. The results indicated that the simulated values of the model were consistent with the observation values, and the R² values varied between 0.91 and 0.99. In addition, based on the laboratory experiments, a water supply system (Mariotte bottles) and soil box were built using plexiglass. Three influencing factors, namely, the channel form, soil texture and channel cross-sectional area, were varied to observe and calculate the resulting cumulative infiltration amount, infiltration rate and wetting front migration distance. HYDRUS-3D software was used to solve the three-dimensional soil water movement equation under different initial conditions. The results demonstrated that the U-shaped channel was more effective than the trapezoidal channel in increasing the utilization efficiency of the water resources. A U-shaped channel with a small channel cross-sectional area should be adopted and the soil particle size should be prioritized in the construction of water conveyance channels for farmlands. The simulation results were in agreement with the observed results, which indicates that HYDRUS-3D is a reliable tool that can accurately simulate the soil moisture movement in water conveyance channels. The research results can provide a reference for the design and operation of farmland irrigation systems.  相似文献   

基于分区间泛化Kriging近似模型的船舶局部结构形状优化     

张干锋  王德禹 《海洋工程》2018,36(6):46-57

为提高Kriging近似模型在船舶结构性能多维度响应预测方面的适用性,对常规Kriging近似模型进行分区间泛化改进:一是对设计样本点的各个维度(分量)进行划区,并在每一个分区间内采用最优拉丁超立方(OLhd)取样;二是引入比例系数w1组合高斯与指数型相关函数提高模型对数据的泛化能力,从而在每个划分的区间内建立泛化的Kriging近似模型。通过SCH测试函数,验证了构造的分区间泛化Kriging模型有效性。结合参数化建模和改进Kriging近似模型对某过渡肘板和舱口角隅边界进行形状优化,优化第一阶段由改进的近似模型通过多岛遗传算法得到全局初步的最优解,第二阶段在初步解的基础上缩小优化变量范围,由少量的FEM计算即可在小范围内搜寻到精确的最优设计变量。结果表明:分区间泛化Kriging近似模型在预测多维度响应时较常规Kriging模型预测精度更高;分阶段的形状优化流程在保证极小误差和缩小计算成本的情况下能够得到理想的应力分布和重量优化结果,有助于船舶结构的轻量化研究。  相似文献   

吉林省村域尺度下居民点空间分布特征及优化重组模式   总被引：2，自引：1，他引：1  

李静  张平宇  郭蒙 《地理科学》2021,41(5):842-850

乡村聚落的空间优化与重构是提高土地资源利用效率,改善农村生产生活条件,促进乡村可持续发展的重要手段。以吉林省为例,采用核密度估计方法和景观形状指数分析了农村居民点空间分布特征,基于农户调查数据估算了吉林省不同区域的农村宅基地闲置情况,将农村居民点长期存在的“破碎化”和日益突出的“空心化”相结合,提出了在行政村尺度下农村居民点优化重组的“整小填大”新模式。结果表明：① 吉林省农村居民点规模小且零散分布,尤其中部呈破碎化分布,形态不规则,具有较大的整治潜力;② 吉林省农村宅基地平均闲置率为18.32%,西部地区最高（24.48%）,分别高于东部和中部地区约6%和12%;③“整小填大”模式可使农村居民点数量减少44.6%,增加有效耕地面积1 046.66 km²。  相似文献   

空间构件形位检测方法与技术进展     

刘尚国  王硕  王少同  刘金龙 《测绘与空间地理信息》2017,40(9)

精密工程与工业测量技术应用领域拓展及其与工业计量测试技术的交叉融合,衍生出"空间构件形位检测"技术、方法与系统。本文详细论述了"空间构件"与"形位检测"的定义及范畴,依测量原理将大尺寸空间构件形位检测技术归纳为正交系测量系统、空间支导线测量系统、三角法测量系统和球坐标法测量系统等,综述了各类测量系统和软件的技术进展,分析指出了狭长或超大空间、恶劣环境、目标动态变化等条件下的形位检测难题。  相似文献   

动力相似法在一次大暴雨过程中的应用          下载免费PDF全文

付世军 《中低纬山地气象》2018,42(3):68-72

利用NCEP再分析资料、ECWMF预报风场和历史降水量资料,分别采用前人提出的相似量和本文改进的相似量进行动力相似选择试验。结果表明:改进后的相似量的相似选择效果最好。对于南充2012年7月4日区域大暴雨过程,用改进相似量筛选出与此次过程最相似的历史个例,进行对比分析后,发现最相似个例风场与预报风场在形状、强度和影响系统空间配置都很相似,降水实况接近。表明最相似个例的风场和降水资料对该次大暴雨过程的降水量级、落区预报有较高的参考和指示意义。  相似文献   

Performance of shape indices and classification schemes for characterising perceptual shape complexity of building footprints in GIS     

Melih Basaraner  Sinan Cetinkaya 《International journal of geographical information science》2017,31(10):1952-1977

Shape characterisation is important in many fields dealing with spatial data. For this purpose, numerous shape analysis and recognition methods with different degrees of complexity have so far been developed. Among them, relatively simple indices are widely used in spatial applications, but their performance has not been investigated sufficiently, particularly for building footprints (BFs). Therefore, this article focuses on BF shape characterisation with shape indices and classification schemes in a GIS environment. This study consists of four phases. In the first phase, the criteria for BF shape complexity were identified, and accordingly, benchmark data was constructed by human experts in three shape complexity categories. In the second phase, 18 shape indices were selected from the literature and automatically computed in GIS. The performance of these indices was then statistically assessed with histograms, correlation matrix and boxplots, and consequently four indices were found to be appropriate for further investigation. In the third phase, two new indices (Equivalent Rectangular index and Roughness index) were proposed with the objective to measure some BF shape characteristics more efficiently. The proposed indices also were found to be appropriate with the same statistical assessment procedures. In the final phase, BF shape complexity categories were created with the pairs of six appropriate indices and four choropleth mapping classification schemes (equal intervals, natural break, standard deviation, and custom) in GIS. The performance of the index–scheme pairs was assessed against the benchmark data. The findings demonstrated that both new indices and two of the selected indices (Convexity and Rectangularity) delivered higher performance. The custom classification scheme was found more ideal to reveal absolute shape complexity with the index value ranges derived from the boxplots while the other classification schemes were more appropriate to reveal relative shape complexity.  相似文献   

基于分类与形态综合的高分辨率影像建筑物提取方法研究   总被引：3，自引：0，他引：3  

刘正军  张继贤  孟亚宾  梁欣廉  孙晓霞 《测绘科学》2007,32(3):38-39,46

本文提出了一种基于分类和形态综合的高分辨率影像建筑物提取方法。主要研究的是基于高分辨率影像多尺度分割的面向对象人工地物分类方法,并以此为基础提取房屋,实现房屋位置、范围的初步自动化提取。最后,对提取的地物图斑的精确边界利用Hough变换提取直线边缘轮廓线,并以此为基础进行轮廓拟合和制图综合,从而得到规则的、方形组合的建筑物形状信息。  相似文献   

AlexNet支持下的地图建筑物形状分类方法     

焦洋洋  刘平芝  刘爱龙  刘松林 《地球信息科学学报》2022,24(12):2333-2341

地图目标的形状在地图制图综合、空间查询等研究中发挥着重要作用。地图建筑物形状的识别与分类作为建筑物轮廓化简与典型化的基础,一直是制图综合研究的热点问题。目前,主要的建筑物形状识别方法主要依赖对建筑物轮廓的描述,对建筑物等地图面状要素的形态特征有较强的依赖性,通常只在应对特定类型的规则轮廓或直角化轮廓时能发挥较好的效果,对于形状不规则或复杂的情况识别不佳。本文提出一种AlexNet支持下的地图建筑物形状分类方法,将矢量地图中建筑物数据的形状分类问题,转化为建筑物栅格图像的分类问题,通过完成卷积神经网络的图形分类实现建筑物的形状识别。该方法首先结合空间认知规律提出一系列典型建筑物形状类型,然后利用矢量-栅格转换的方法从OSM数据采样单体建筑物栅格图像,通过人工标识获得建筑物形状分类训练样本,训练AlexNet卷积神经网络分类模型,最后利用训练好的模型对大比例尺建筑物数据进行智能形状分类与识别。本文利用北京、香港2个城市的OSM建筑物数据作为样本训练建筑物形状分类模型,并在广州部分城区的OSM建筑物数据上进行验证。相较传统形状相似性度量方法,本文提出的方法对实验区建筑物的识别分类总体查全率提高了2.48%,达到92.32%,对于较为复杂的形状（如T形、十字形）识别也具有更高的精度,查准率分别提高了13.83%和24.53%。实验结果表明本文提出的方法对建筑物形状分类的效果有明显提升,能够实现常见建筑物形状的有效分类,为下一步的建筑物化简、典型化等综合操作打下了基础。  相似文献   

新疆乌鲁木齐台地电阻率变化及震兆特征   总被引：2，自引：0，他引：2  

孙晓丹  马世贵  曹卫东 《山西地震》1999,(2):39-41

以乌鲁木齐地电阻率观测资料为依据,在展示其变化特征的基础上,对该地电阻率资料异常变化与近区中强地震及部分远区的大地震之间的关系进行了归纳、分析与讨论。对地电阻率前兆异常形态与地震之间的关系进行了探讨。  相似文献