Stability and accuracy analysis of the central difference method for real‐time substructure testing     

B. Wu  H. Bao  J. Ou  S. Tian 《地震工程与结构动力学》2005,34(7):705-718

The central difference method (CDM) that is explicit for pseudo‐dynamic testing is also believed to be explicit for real‐time substructure testing (RST). However, to obtain the correct velocity dependent restoring force of the physical substructure being tested, the target velocity is required to be calculated as well as the displacement. The standard CDM provides only explicit target displacement but not explicit target velocity. This paper investigates the required modification of the standard central difference method when applied to RST and analyzes the stability and accuracy of the modified CDM for RST. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

AHP及模糊综合评判法在路基长期稳定性评价中的应用     

付兵先  唐飞  李天降 《岩土工程技术》2005,19(6):284-286,322

根据对一低液限粉土路基的现场工程地质调查及检测,确定了影响该路基长期稳定性的主要影响因素,并结合AHP法,应用两级模糊综合评判的方法对该路基的长期稳定性进行了评价。  相似文献   

库水位变化对库岸边坡稳定性的影响   总被引：3，自引：0，他引：3  

夏麾  刘金龙 《岩土工程技术》2005,19(6):292-295

在假定坡体孔隙水水位为水平线且不考虑渗透作用影响的基础上,基于极限平衡法考察了水位上升及下降的快慢对边坡安全系数的影响。对比计算表明:在水位缓慢变化即坡体内外水位线等高的条件下,边坡的安全系数随着水位坡高比的增大先略减小后急剧增大,且在水位坡高比为0.3处取得最小值,在边坡完全淹没于水中时取得最大值。当边坡完全淹没于水中后,水位高于坡顶的多少对边坡安全系数没有影响;在水位骤降或陡升条件下,相同库水位对应的边坡安全系数基本上均小于水位缓慢变化情况下的安全系数,故工程实际中无论是排水还是蓄水,都应尽量保持水位缓慢变化,这样才能使边坡处于较安全的状态。  相似文献   

Analysis of earth dams affected by the 2001 Bhuj Earthquake   总被引：3，自引：0，他引：3  

Raghvendra Singh  Debasis Roy  Sudhir K. Jain   《Engineering Geology》2005,80(3-4):282-291

An earthquake of magnitude of 7.6 (M_w 7.6) occurred in Bhuj, India on January 26, 2001. This event inflicted damages of varying extents to a large number of small to moderate size multi-zone earth dams in the vicinity of the epicenter. Some of the distress was due to the liquefaction of saturated alluvium in foundation. Liquefaction was relatively localized for the majority of these dams because the earthquake struck in the middle of a prolonged dry season when the reservoirs behind these dams were nearly empty and shallow alluvium soils underneath the downstream portions of the dams were partly dry. Otherwise, liquefaction of foundation soils would have been more extensive and damage to these dams more significant. Six such dams have been examined in this paper. Four of these facilities, Chang, Shivlakha, Suvi, and Tapar were within the 50 km of epicenter region. These dams underwent free-field ground motion with peak ground accelerations between 0.28g to 0.52g. Of these Chang Dam underwent severe slumping, whereas Shivlakha, Suvi, and Tapar Dams were affected severely especially over the upstream sections. Fatehgadh Dam and Kaswati Dam were affected relatively less severely. Foundation conditions underneath these dams were first examined for assessing liquefaction potential. A limited amount of subsurface information available from investigations undertaken prior to the earthquake indicates that, although the foundation soils within the top 2.0 to 2.5 m underneath these dams were susceptible to liquefaction, Bhuj Earthquake did not trigger liquefaction because of lack of saturation of these layers underneath the downstream portions of these dams. These dams were then analyzed using a simple sliding block procedure using appropriate estimates of undrained soil strength parameters. The results of this analysis for these structures were found to be in general agreement with the observed deformation patterns.  相似文献   

Influence of tectonic structures on the Hope Slide, British Columbia, Canada     

Marc-Andr  Brideau  Doug Stead  Derek Kinakin  Karin Fecova 《Engineering Geology》2005,80(3-4):242-259

The Hope Slide, which occurred on January 9, 1965, involved an estimated 47-Mm³ of meta-volcanics and intrusive rocks. Previous workers reported the presence of tectonic structures (faults and shear zones) along the failure surface at the Hope Slide. These tectonic features were investigated in detail to assess their effects on rock-mass quality and the related implications for slope stability. This paper integrates basic field and laboratory concepts from structural and engineering geology. Subdividing the failure area into structural domains allowed distinct discontinuity sets to be associated with specific tectonic structures. The Geological Strength Index (GSI) was used to estimate the rock-mass damage related to the tectonic structures. Low GSI values were seen to outline tectonic damage zones. Point-load tests were used to characterise the compressive strength of rocks adjacent to the tectonic structures. Strength anisotropy, tentatively attributed to damage caused by a large shear zone, was observed in greenstone samples. Seepage zones along the failure surface were observed preferentially along shallow discontinuities that dipped downslope and in rock masses of good quality (GSI > 40). An alternative morphology of the slope failure is proposed by distinguishing between the extent of the surficial damage due to the rock-slope failure and the zone of failed material (depletion zone). For the first time, a kinematic mechanism for the Hope Slide is proposed, based on a preliminary 3-dimensional block model. A pre-1965 DEM was produced from estimates of material lost and gained as reported by previous workers. The pre-1965 DEM revealed that the tectonic structures recognised during fieldwork bounded the material that failed in the 1965 event.  相似文献   

Slope stability evaluation using Back Propagation Neural Networks   总被引：4，自引：0，他引：4  

H.B. Wang  W.Y. Xu  R.C. Xu 《Engineering Geology》2005,80(3-4):302-315

The Yudonghe landslide, located in western Hubei Province of China, consists of eastern and western subunits as well as a main landslide mass with upper and lower slip surfaces. As an important landslide close to Shuibuya Dam on the Qing River, its stability is crucial, as the slide might reactivate because of a change in ground-water level caused by filling of the Shuibuya Reservoir. Existing weakness zones, growth of ruptures, the downslope attitude of geologic strata, and water infiltration, which reduced the strength of rocks and soils, have been found to be the most important factors contributing to the Yudonghe landslide. With regard to the landslide processes, it can be noted that the original large-scale slide activity was due to erosion by the Qing River, the second sliding resulted from the fall of blocks from the head scarp, and the final activity was the growth of the eastern and western secondary slides. A base failure was the main type of slope movement, however, it was obvious that more than one sliding event occurred, as inferred from striations and fractures detected by microstructure analysis of soils along the failure surfaces. Slope instability was evaluated by the method of Back Propagation Neural Networks (BPNN), in which a four-layer BPNN model with five input nodes, two hidden layers, and two output nodes was constructed using a training data set of landslide samples throughout the Qing River area. The predicted results of this analysis showed that the factor of safety was 1.10, which indicates that the Yudonghe landslide is currently in a marginally stable condition.  相似文献   

三峡库区巴东县城附近主要滑坡边界轨迹分形分维特征与滑坡稳定性关系   总被引：4，自引：1，他引：4       下载免费PDF全文

吴树仁  韩金良  石菊松  张永双  何锋  董诚 《地球学报》2005,26(5):455-460

为了探索复杂滑坡轨迹结构演化及其稳定性定量分析计算的新途径，本文利用分形分维理论，分析三峡库区巴东县城附近滑坡边界轨迹的几何分形结构，并采用盒维数法分别求得巴东县城附近11个滑坡边界轨迹的分维值，计算结果表明：每个滑坡的轨迹结构具有其特征性的分维值，轨迹结构越复杂，结构层次越清楚，分维值越高；其中，榨房坪滑坡和黄腊石滑坡的分维值最高，分别为1.50和1.483，西壤口和谭家湾滑坡的分维值最低，分别为0.925和0.732；而黄土坡和赵树岭滑坡的分维值介于二者之间，分别为1.111和1.091。结合典型滑坡边界轨迹结构演化与滑坡稳定性关系的定性分析及前期滑坡稳定性定量计算和模拟分析，初步揭示：滑坡边界轨迹结构与稳定性是密切相关的，滑坡边界轨迹宏观扩展增值越明显，轨迹结构越复杂，分维值越高，其稳定性条件也越差，因此，分数维可作为衡量滑坡轨迹结构复杂性和稳定性的重要标志；滑坡边界轨迹宏观扩展变形存在一个极限，超过这个极限滑坡的局部失稳就转化为整体滑动；而滑坡边界轨迹则记录了滑坡变形扩展现象和信息，因此，相对应地滑坡轨迹分形结构的分维值也应存在一个极值，在极值点滑坡体处于临滑状态；滑坡边界轨迹结构的极限分维值大致为1.4～1.5，此时滑坡接近于整体极限失稳状态，而分维值在1.1～1.3之间则表示滑坡处于整体稳定，局部存在潜在失稳状态，分维值小于1则表示滑坡处于相对稳定状态。  相似文献   

Analysis of rock structure stability in coal mines   总被引：1，自引：0，他引：1  

Yi‐Shan Pan  Zhong‐Hua Li 《国际地质力学数值与分析法杂志》2005,29(10):1045-1063

In this paper, the theory of limit point instability is used to analyse the stability of rock structures in coal mines. A general method of analysing stability of rock structures is put forward and a uniform instability condition of rock structures is set up. Some instability phenomena, such as rock bursts in circular roadways, pillars and long walls, and the outburst of coal and gas from circular roadways, are discussed analytically. At a later stage, the critical point of rock structure instability is determined. The influence of relative parameters (such as the mechanical properties of rock, coal, and the geometric sizes) on the stability of the rock structures is carefully analysed. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Left upstream slope design for the Çatalan Dam, Adana, Turkey and its behaviour under actual earthquake loading     

Altay Acar  ?smail Dinçer 《Engineering Geology》2005,82(1):1-11

An investigation and remediation of instability along upstream cut slopes for an earthfill dam in differentially weathered rock in southern Turkey is described. The major instability problem was a 45-m high and 200-m long previously cut slope next to the main axis of the dam, above the diversion tunnels and water outlet structures. The slope was first designed and excavated in 1986 based on the temporary berm approach. Rising water level in the reservoir would change the shear strength parameters and the pore-water pressure in the slope; thus, probable deep failure would damage the entrance of the diversion tunnels and water outlet structures, as well as the earthfill embankment of the dam. In June 1996, the slope face was re-excavated and protected against wave erosion by placement of a layer of rock riprap over a layer of bedding and a filter material. A strong earthquake (M_S = 6.2) occurred during a period of rapid drawdown in 27 June 1998. The slope remained stable, although numerous tension cracks developed in Quaternary terrace deposits near the reservoir area.  相似文献   

Designing geotechnical structures with a proper stability criterion as a safety factor     

《Computers and Geotechnics》2016

  相似文献