Application of DEM overlaying technique in surface subsidence identification─a case study in Ruqigou coal mining area of Ningxia,China     

CHEN Li-ding 《地理学报(英文版)》1999,(1)

1IntroductionSubsidence,asverticalmovementoftheeallof'USt,occurredinmanypartsoftheworld,Particularlyindenselypopulateddeltalcregions.Withocctirrenceofsurfacesubsidence,alotofdamagehasbeeninduced.Surfacesubsidencecanberesultedfromnabscauses.suchastectonicinchonandsealevelrise,fromman-madeinducedcauses,suchasexcessivewithdrawalofgroundwater,geothennalfluids.oilandgas,orextrachonofcoal,sulphur,goldandothersolidsthroughminingorUndergroundconstrUchon(t'Unnelling),orfromother"dxedcausessuchashydro…  相似文献   

洱源FD-105K与FD-125测氡仪对比观测分析     

段美芳  李庆  陆丽娜  字承柱  李燕池 《地震地磁观测与研究》2020,41(2):123-129

选取2015—2019年洱源水化站FD-105K与FD-125测氡仪对比观测资料,采用一阶差分、F检验、t检验等方法进行对比分析,结果显示:FD-125测氡仪测值总体偏低,且测量精度较低,数据离散程度较高;2套观测数据变化趋势一致性不理想,相关性较低,未通过F检验和t检验。综合分析认为,FD-125测氡仪暂时不能替代FD-105K测氡仪进行观测,需要增加震例对2套仪器的映震效能进行验证。  相似文献   

地裂缝场地施工降水对地表沉降和地层应力的影响研究     

王庆兵  黄强兵  闫钰丰  杨招  胡士伟  雷建 《地质力学学报》2020,26(2):221-231

地裂缝是西安市典型的城市地质灾害，地下水位的变化是诱发地裂缝活动的重要因素。以西安地铁六号线暗挖段施工降水为研究背景，基于有限元数值模拟计算，分析了地裂缝场地施工降水引起的地表沉降规律和地层应力变化特征。计算结果表明:当地下水位下降时，地表沉降量上盘大于下盘，地裂缝带两侧地表存在差异沉降的现象，最大差异沉降量与地下水位下降深度近似呈直线关系；不同位置处地表的横向沉降呈现出"Z"形的变化特征，差异沉降区随地裂缝位置的变动而变化，且差异沉降量与横向地表位置近似呈二次函数曲线关系；地层竖向应力随着地下水位下降而增大，地裂缝位置处地层应力存在突变现象，上下盘应力影响区与地层深度近似呈三次函数曲线关系；基于分层总和法计算了地下水位下降时地表沉降量的解析解，并与数值模拟结果进行对比，发现两种方法计算结果基本一致，得到了计算地表最大沉降量的经验公式。研究结果可为地裂缝场地地铁隧道及其他地下工程安全施工提供科学指导。   相似文献   

用NCEP／NCAR再分析辐射资料估算月平均地表反照率   总被引：16，自引：1，他引：15  

张琼  钱永甫 《地理学报》1999,54(4):309-317

本文利用１９７９年￣１９９５年１７年平均的ＮＣＥＰ／ＮＣＡＲ（Ｎａｔｉｏｎａｌ Ｃｅｎｔｅｒ ｆｏｒ Ｅｎｖｉｒｏｎｍｅｎ－ｔａｌ Ｐｒｅｄｉｃｔｉｏｎ／Ｎａｔｉｏｎａｌ Ｃｅｎｔｅｒ ｆｏｒ Ａｔｍｏｓｐｈｅｒｉｃ Ｒｅｓｅａｒｃｈ,美国国家环境预报中心／美国国家大气研究中心）再分析辐射资料估算了全球月平均地表反照率．从所得结果的时空分布来看,用ＮＣＥＰ／ＮＣＡＲ辐射资料得到的全球地表反照率基本  相似文献   

Influence of forest fire episodes on the distribution of gaseous air pollutants over Uttarakhand,India     

Yesobu Yarragunta  Debashis Mitra  Harish Chandra Chandola 《地理信息系统科学与遥感》2020,57(2):190-206

ABSTRACT

Widespread forest fire events occurred in the foothills of North Western Himalaya during 24 April to 2 May 2016 (Event-1) and 20–30 May 2018 (Event-2). Their impacts were investigated on the distribution of pollutant gases ozone (O₃), carbon monoxide (CO), and oxides of nitrogen (NOx) over Uttarakhand using simulations of Weather Research and Forecasting model coupled with chemistry (WRF-Chem) and in-situ observations of these gases over Dehradun, the capital of Uttarakhand. During Event-1, the observed CO mixing ratio over Dehradun increased from 25 April 2016 onwards, attained maximum (705.8 ± 258 ppbv) on 2 May 2016 and subsequently decreased. The rate of increase of daily baseline CO was 29 ppbv/day during HFAP (High Fire Activity Period). During Event-2, daily average concentrations of CO, O₃, and NOx showed systematic increase over Dehradun during HFAP period. The rate of increase of CO was 9 ppbv/day, while it was very small for NOx and O₃. To quantitatively estimate the influence of forest fire emissions, two WRF-Chem simulations were made: one with biomass burning (BB) emissions and other without BB emissions. These simulations showed 52% (34%) enhancement in CO, 52% (32%) enhancement in NOx, and 11% (9%) enhancement in O₃ during HFAP for Event-1 (Event-2). A clear positive correlation (r = 0.89 for Event-1, r = 0.69 for Event-2) was found between ?O₃ (O_{3with BB} minus O_{3without BB}) and ?CO (CO_{with BB} minus CO_{without BB}), indicating rapid production of ozone in the fire plumes. For both the events, the vertical distribution of ?O₃, ?CO, and ?NOx showed that forest fire emissions influenced the air quality upto 6.5 km altitude. Peaks in ?O₃, ?CO, and ?NOx during different days suggested the role of varying dispersion and horizontal mixing of fire plumes.  相似文献   

VLBI观测双线极化条纹拟合方法     

黄逸丹  刘磊  舒逢春  郑为民 《测绘学报》2020,49(4):423-431

提出了一种可用于下一代VLBI观测系统(VGOS)的双线极化条纹拟合方法。现有的VLBI观测模式采用的是右圆极化(RCP),而VGOS系统采用的是双线极化。本文方法包括校正和组合条纹拟合两部分。校正部分选择一颗强源作为参考源,分别得到不同极化方式下的通道时延及相位校正数据,用于目标源的校正。组合条纹拟合部分将4种极化分量的可见度数据组合成伪Stokes分量,通过搜索差分星位角使伪Stokes分量的幅值达到最大,从而获得最终的时延观测量。与单极化条纹拟合相比,组合极化获得的条纹具有更高的信噪比(SNR)及更小的条纹相位弥散度。  相似文献