Optical monitoring of the quasar 4C 38.41     

B. Peng  J. Wu  X. Zhou 《Monthly notices of the Royal Astronomical Society》2003,346(2):483-488

The results of a photometric monitoring of the quasar 4C 38.41, performed at the optical R and B bands in 2002 February–March, are presented. With a 60/90 cm Schmidt telescope at the Xinglong station of the National Astronomical Observatories of China, we observed the source exhibiting amplitude variations of up to 0.78 mag in both bands during the whole campaign. Intraday and even intranight variations are detected as well. A typical variability time-scale of about 36 d is derived from our 2-month observations at the optical bands, which is identical to that found at a radio wavelength of 92 cm, suggesting a common origin for the variations in 4C 38.41 from optical to radio bands.  相似文献   

SIMULATION AND PREDICTION OF DEBRIS FLOW USING ARTIFICIAL NEURAL NETWORK     

WANGXie-kang HUANGEr CUIPeng 《中国地理科学(英文版)》2003,13(3):262-266

Debris flow is one of the most destructive phenomena of natural hazards. Recently, major natural haz-ard, claiming human lives and assets, is due to debris flow in the world. Several practical methods for forecasting de-bris flow have been proposed, however, the accuracy of these methods is not high enough for practical use because of the stochastic and non-linear characteristics of debris flow. Artificial neural network has proven to be feasible and use-fill in developing models for nonlinear systems. On the other hand, predicting the future behavior based on a time se-ries of collected historical data is also an important tool in many scientific applications. In this study we present a three-layer feed-forward neural network model to forecast surge of debris flow according to the time series data collect-ed in the Jiangjia Ravine, situated in north part of Yunnan Province of China. The simulation and prediction of debris flow using the proposed approach shows this model is feasible, however, further studies are needed.  相似文献   

Shapelets – II. A method for weak lensing measurements     

Alexandre Refregier  David Bacon 《Monthly notices of the Royal Astronomical Society》2003,338(1):48-56

  相似文献   

Application of Grain Size Analysis to Study Sedimentary Environment of Sand Dune in the Vicinity of Tumen River     

Feng Ma  Li Liu  Lin Cao 《东北亚地学研究》2003,(1)

The dunes in estuary of Tumen River in China lie to the area between the Jiushaping and Fangchuan in the left bank of Tumen River (Fig.1). The dis-tance is about 15～20 km between the dunes and the coast. It ranges from China to D. P. R. Korea and Russia. The range of the height of dunes is about 15～20 m and the width is 100～200 m. By the re-connaissance, we protracted 9 section planes of the dunes and collected 40 sand samples of the dunes, and identified the sedimentary environment …  相似文献   

格网DEM中基于坡度信息的粗差检测与剔除方法试验     

韩玲 《地球科学与环境学报》2003,25(1):74-75

提出了一种基于格网DEM的粗差检测及剔除方法,其基本思想是对每个表面上的点,在坡度上,高程或突变量引起的形状不连续,可能被怀疑有误差,通过坡度上每个点,应用坡度逼近或改变量来计算,考虑坡度变化的相对值,并以这些相对值计算一个统计值为判断该点合法性的阈值,使计算结果更为可靠。  相似文献   

应用GPS观测青藏高原东北缘应力场变化   总被引：2，自引：0，他引：2  

张永志  胡斌  陈宏宾 《地球科学与环境学报》2003,25(4):80-84

采用各向同性弹性地球模型推导了地面位移场速率与地壳内任意点应力场变化的边界积分关系,同时利用青藏高原东北缘1999～2001年观测的GPS资料对观测区地壳深度为5 km和25 km的主应力和最大剪应力进行了计算分析.结果表明,青藏高原东北缘的主应力变化主要集中在祁连山断裂、海原断裂等,在1920～1954年间历史上发生过多次震级为7.0～8.5级强震的断裂附近,并具有主应力变化沿断层走向分布、最大剪应力沿断层走向交替变化等特征.  相似文献   

CCD联合平差方法及其初步实例检验     

YU Yong LI Jinling TANG Zhenghong WANG Guangli ZHAO Ming 《中国科学院上海天文台年刊》2003,(1)

在常规照相天体测量工作中 ,对暗天体的定位是采用逐级定标星过渡的方法实现的。由于星表系统差和局部差的存在 ,最终定位结果可能包含难以把握的误差积累。在CCD小视场观测情况下时常难以找到足够数量的定标星。鉴于此 ,推导了CCD观测联合平差方法的严格矢量表达式 ,以期通过共同星的过渡 ,实现大天区统一平差。原理上此方法可实现相对于河外天体的定位 ,以削弱星表系统差和局部差对定位结果的影响。讨论了CCD联合平差方法实现中的问题 ,包括底片常数模型选择、切点位置改正、共同星的较差改正和法方程解算方法等 ,并分析了具体的处理措施。用实例初步检验了CCD联合平差方法的效果 ,表明通过对多张CCD观测的联合平差 ,可以削弱单张CCD观测参考星数目过少、单张CCD观测参考星分布不均、个别参考星存在位置偏差和局部区域参考星存在系统性位置偏差等不利因素对归算结果的影响 ,进而达到扩大视场和提高归算精度的目的  相似文献   

DISASTER ANALYSIS AND COUNTERMEASURES OF LAND SUBSIDENCE CAUSED BY COAL CUTTING IN CHINA     

YANGYong-liang SHITong-guang JLANGLU-guang LIYue 《中国地理科学(英文版)》2003,13(2):130-133

In recent years, many coal-producing countries have paid great attention to the land subsidence causedby coal cutting. In China, because of the dense population in coalfield areas, the land subsidence hazard is more seri-ous. After a brief analysis on the mechanism of land subsidence, this paper gives a comprehensive and systematical ac-count on all kinds of hazards caused by the land subsidence in China. The study shows that land subsidence has endan-gered land, buildings, traffic and communication lines, dykes and dams. It also causes damage to ecological and socialenvironment. In order to lessen the hazard of land subsidence, preventive measures should be taken to reduce the col-lapse amount, such as extraction with stowing, banded mining system, succession and coordination mining system, orhigh-pressure mudflow between rock strata. Measures of reinforcing or moving certain buildings should also be taken toreduce the destructive degree. In order to harness the subsidence land and bring them under control for fanning, mea-sures should be taken such as filling with spoil or fine breeze, excavating the deeper and covering the shallower land.  相似文献   

Principal components in active galactic nuclei variability data and the estimation of the flux contributions from different components     

Chris Koen  Fred Lombard 《Monthly notices of the Royal Astronomical Society》2005,357(2):793-799

It has been found that the near-infrared flux variations of Seyfert galaxies satisfy relations of the form   F_i ≈α _{i j} +β _{i j} F_j   , where F_i , F_j are the fluxes in filters i and j ; and  α _{i , j} , β _{i , j}   are constants. These relations have been used to estimate the constant contributions of the non-variable underlying galaxies. The paper attempts a formal treatment of the estimation procedure, allowing for the possible presence of a third component, namely non-variable hot dust. In an analysis of a sample of 38 Seyfert galaxies, inclusion of the hot dust component improves the model fit in approximately half the cases. All derived dust temperatures are below 300 K, in the range 540–860 K or above 1300 K. A noteworthy feature is the estimation of confidence intervals for the component contributions: this is achieved by bootstrapping. It is also pointed out that the model implies that such data could be fruitfully analysed in terms of principal components.  相似文献   

嵌入式时间间隔计数器的研制     

樊战友  胡永辉  边玉敬 《时间频率学报》2005,28(1):7-14

介绍了一种新研制的嵌入式时间间隔计数器，它可作为一种功能模块用于用户的设备或时统中，实现高精度时间测量。从基本原理、硬、软件和功能等不同角度对计数器进行了较为详细的讨论。在该计数器的研制过程中还开发了用来调试计数器和供计数器用户使用的计算机应用软件，对此也作了简要介绍。最后，给出了计数器的设计指标和一些实测数据。  相似文献