Low-low satellite-to-satellite tracking: a comparison between analytical linear orbit perturbation theory and numerical integration   总被引：1，自引：0，他引：1  

P.N.A.M. Visser 《Journal of Geodesy》2005,79(1-3):160-166

Low-low satellite-to-satellite tracking (ll-SST) range-rate observations have been predicted by two methods: one based on a linear perturbation theory in combination with the Hill equations, and one based on solving the equations of motion of two low-flying satellites by numerical integration. The two methods produce almost equivalent Fourier spectra of the range-rate observations after properly taking into account a few resonant terms. For a typical GRACE-type configuration, where the two satellites trail each other at a distance of 300 km at an altitude of 460 km, and in the presence of the EGM96 gravity field model, complete to spherical harmonic degree and order 70, the agreement between the Fourier spectra is about 1 mm/s compared to a root-mean-square (RMS) value of more than 220 mm/s for the range-rate signal. The discrepancy of 1 mm/s can be reduced significantly when not taking into account perturbations caused by the J₂ term. Excluding the J₂ term, the agreement between the two methods improves to 0.4 mm/s compared to a RMS value of 6 mm/s for the range-rate signal. These values are 0.01 and 2.3 mm/s when ignoring the spectrum for frequencies below two cycles per orbital revolution, reducing the discrepancy even further to about 0.5% of the signal. The selected linear perturbation theory is thus capable of modeling gravity field induced range-rate observations with very high precision for a large part of the spectrum.  相似文献   

Spaceborne gravitational field determination by means of locally supported wavelets     

W. Freeden  M. Schreiner 《Journal of Geodesy》2005,79(8):431-446

In space-borne gravitational field determination, two challenges are inherent. First, the continuation of the data down to the surface of the Earth is an ill-posed problem, requiring therefore regularization techniques. Second huge data sets result requiring efficient numerical methods. In this paper, we show how locally supported wavelets on the sphere can be developed by means of a spherical version of the so-called up function. By construction, the corresponding scaling functions and wavelets are infinitely smooth, so that they can be used for regularization purposes. In particular, we show how the ill-posed pseudo-differential equations coming from satellite missions can be regularized by efficient numerical schemes using locally supported wavelets. These methods seem in particular to be interesting for regional gravity field modelling.  相似文献   

滑坡治理中格构锚固结构的解析解分析   总被引：17，自引：0，他引：17  

许英姿  唐辉明 《地质科技情报》2002,21(3):89-93

在分析格构锚固结构受力的基础上 ,将格构梁简化为受集中力作用的弹性地基上的梁 ,提出了格构锚固结构的力学模型 ,利用 Winkler弹性地基上梁的解析解对格构梁进行了内力和变形的分析 ,发现格构梁的受力状况受弹性特征λ、梁格间距 ls以及悬臂长度影响 ;建议梁长 l与λ宜满足 lλ≥ 2π;采用较小间距的格构梁以及小吨位锚索 ,间距宜满足 lsλ<π/ 2 ,悬臂长度取 (0 .3～ 0 .5 ) ls,并将分析结论应用于三峡库区巴东太矶头东滑坡治理工程的设计中  相似文献   

GPS进行长边控制测量分析     

王兴国 《福建地质》2002,21(2):119-121

采用基准和基准转换模型的不同会导致GPS观测边长与坐标计算边长不一致。因此由GPS测量的WGS－84坐标系向我国的北京54坐标系转换计算时，应尽可能选择参考点作对比分析。若满足精度要求，可采用全国精密参数作转换计算，若不能满足精度要求或达不到实测点的定位精度，可先将边长作高程异常改正，再对起算点作方位改正。  相似文献   

黑龙江省矿区生态破坏与地质灾害及其防治   总被引：3，自引：0，他引：3  

尹喜霖  王勇  张烽龙  郭有民 《工程地质学报》2002,10(3):254-259

黑龙江省矿产分布情况和开发概况以及矿业开发在经济发展中占有重要地位 ;在矿业开发过程中引起的诸多生态破坏和地质灾害及其引起的危害 ,已引起高度重视 ;本文在综合论述黑龙江省矿区发展所带来各项利弊后提出了具体的防治对策。  相似文献   

三峡工程库区巴东县赵树岭滑坡稳定性与防治对策研究   总被引：16，自引：2，他引：16  

唐辉明  马淑芝等 《地球科学》2002,27(5):621-625

赵树岭滑坡是三峡工程库区的重要滑坡，其稳定性直接关系到巴东新县城沿江大道的安全，并对新县城土地利用意义重大。在阐述赵树岭滑坡基本特征的基础上，运用水岩耦合三维有限元数值方法模拟了滑坡稳定性，预测了三峡水库蓄水后滑坡稳定性发展趋势和渗流特征。研究表明，水库蓄水及水位波动是影响滑坡稳定性的主要因素，三峡水库蓄水后，滑坡将发生局部失稳，必须加以治理，提出了滑坡防治的原则与对策。  相似文献   

Optimal design of passive energy dissipation systems based on H∞ and H2 performances     

J. N. Yang  S. Lin  J‐H. Kim  A. K. Agrawal 《地震工程与结构动力学》2002,31(4):921-936

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures     

A. S. Ahlawat  A. Ramaswamy 《地震工程与结构动力学》2002,31(7):1459-1479

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Study of a semi‐active stiffness damper under various earthquake inputs     

S. L. Djajakesukma  B. Samali  H. Nguyen 《地震工程与结构动力学》2002,31(10):1757-1776

Semi‐active stiffness damper (SASD) is one of many semi‐active control systems with the capability to mitigate the dynamic response using only a small amount of external power. The system consists of a hydraulic damper connected to the bracing frame in a selected story unit. In this paper, study of a SASD in two building models of five‐stories under four benchmark earthquake records is reported. The purpose of this study is to evaluate the effectiveness of the control system against structure type and varying earthquake inputs. Various control laws are chosen to work with SASD, such as: resetting control, switching control, linear quadratic regulator (LQR) and modified LQR, and the results are compared with no control and passive control cases. Numerical results show that the use of a SASD is effective in reducing seismic responses. Control effectiveness is dependent on the type of structure and earthquake excitation. Passive control is less effective than other control cases as expected. Resetting control, switching control and LQR generally perform similarly in response reduction. While modified LQR is more efficient and robust compared with other control algorithms. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

渤海湾盆地北部奥陶纪岩相古地理   总被引：8，自引：0，他引：8  

金振奎  邹元荣  由伟丰  蒋春雷 《沉积学报》2002,20(1):13-19

渤海湾盆地北部主要包括黄骅坳陷、沧县隆起、冀中坳陷和下辽河坳陷,区内奥陶系厚 6 0 0～ 80 0m,主要由石灰岩和白云岩组成。下奥陶统分为冶里组和亮甲山组,中奥陶统分为下马家沟组、上马家沟组和峰峰组,上统缺失。其中下马家沟组、上马家沟组和峰峰组又进一步划分为下段和上段。早奥陶世冶里期和亮甲山期,本区以局限海环境为主,其内散布着一些潮坪和滩。中奥陶世,本区岩相古地理面貌变化旋回极为明显,下马家沟期早期潮坪广布,晚期以局限海为主;上马家沟期早期又是潮坪广布,晚期以开阔海为主;峰峰期早期潮坪广布,晚期又以开阔海为主。在奥陶纪,本区经历了 4个大的海侵-海退旋回,其中上马家沟期晚期是本区乃至整个华北地台的最大海侵期。  相似文献