Relationship between the seismicity and geologic structure of the Blanco Transform Fault Zone     

Robert P. Dziak  Christopher G. Fox  Robert W. Embley 《Marine Geophysical Researches》1991,13(3):203-208

Morphologic studies of an oceanic transform, the Blanco Transform Fault Zone (BTFZ), have shown it to consist of a series of extensional basins that offset the major strike-slip faults. The largest of the extensional basins, the Cascadia Depression, effectively divides the transform into a northwest segment, composed of several relatively short strike-slip faults, and a southeast segment dominated by fewer, longer faults. The regional seismicity distribution (m _b 4.0) and frequency-magnitude relationships (b-values) of the BTFZ show that the largest magnitude events are located on the southeast segment. Furthermore, estimates of the cumulative seismic moment release and seismic moment release rate along the southeast segment are significantly greater than that of the northwest segment. These observations suggest that slip along the southeast segment is accommodated by a greater number of large magnitude earthquakes. Comparison of the seismic moment rate, derived from empirical estimates, with the seismic moment rate determined from plate motion constraints suggests a difference in the seismic coupling strength between the segments. This difference in coupling may partially explain the disparity in earthquake size distribution. However, the results appear to confirm the relation between earthquake size and fault length, observed along continental strike-slip faults, for this oceanic transform.  相似文献   

Relationship between Shot-Induced Noise and Shot Interval in Seismic Refraction Experiments at Sea     

Herber  R.  Weigel  W.  Wong  H. K. 《Marine Geophysical Researches》1997,19(3):257-265

Seismic noise induced by the seismic source during continuous profiling reduces the signal-to-noise ratio and hence the data quality. This noise is largely dependent on the shot interval. In this paper, the noise amplitude of refraction seismic records from a special experiment is analysed as a function of the shot interval. An empirical exponential relationship between mean peak noise amplitude and shot interval is deduced. By increasing the shot interval, the induced noise can be minimized on all successive records. This results in an improvement of the data, predominantly the signal-to-noise ratio. Because the seismic signal and the shot-induced noise have nearly the same spectra, the chance of improving the signal-to-noise ratio by stacking is significantly reduced.  相似文献   

Dereverberation of marine reflection seismic data by a spatial combination of predictive deconvolution and velocity filtering     

C. Samson  G. F. West 《Marine Geophysical Researches》1995,17(1):1-15

Contamination of seismic reflection records at early times by first-order water reverberations can be especially severe during survey operations over hard and flat sea floors on the continental shelf or in lake environments. A new dereverberation scheme based on two classical techniques — predictive deconvolution and velocity filtering — has been developed to address this problem. The techniques are combined spatially to take advantage of their complementary offset- and time-dependent properties. Stage I of the scheme consists of applying predictive deconvolution at short offset. The data are previously conditioned by a normal moveout correction with the water velocity which restores the periodicity of the reverberations in the offset-time plane and enhances the performance of deconvolution. Stage II of the scheme involves velocity filtering in the common-midpoint domain which is particularly effective at long offset where the moveout difference between primary reflections and reverberations is largest. The dereverberation scheme is well suited for the initial processing of large volumes of data due to the general availability of cost-effective deconvolution and velocity filtering algorithms in seismic processing software packages. Practical implementation issues are illustrated by a field example from the GLIMPCE survey in Lake Superior.Lithoprobe Publication No. 475.  相似文献   

Facies recognition of some Tertiary coals applied to prediction of oil source rock occurrence     

S. Thompson  R.J. Morley  P.C. Barnard  B.S. Cooper 《Marine and Petroleum Geology》1985,2(4):288-297

Coals are oil source rocks in many of the Tertiary basins of Southeast Asia. The precursors of these hydrogen rich and oxygen poor coals are coastal plain peats which have mainly developed in an everwet and tropical climate. In these environments water flow and reworking can concentrate liptinitic kerogen in preference to vitrinitic kerogen. The distribution, petrography and chemistry of the coaly Miocene source rocks present in the Kutai Basin are described. The recognition of environmental controls on the accumulation of potentially oil-prone coals and coaly shales in deltaic environments is an aid to predictive source bed recognition in petroleum exploration. Comments on the environment of deposition of coaly sediments in the basins of the Norwegian Sea are discussed with reference to their possible oil and/or gas sourcing potential. The Triassic - Jurassic coals of the Haltenbanken area may become more oil-prone towards the delta margins, and facies mapping could aid oil exploration in this area.  相似文献   

Response-based method for determining the extreme behaviour of floating offshore platforms     

Said Mazaheri  Martine J. Downie 《Ocean Engineering》2005,32(3-4):363-393

The accurate prediction of extreme excursion and mooring force of floating offshore structures due to multi-variete environmental conditions which requires the joint probability analysis of environmental conditions for the worst case situation is still impractical as the processing of large amount of met-ocean data is required. On the other hand, the simplified multiple design criteria (e.g. the N-year wave with associated winds and currents) recommended by API known as traditional method does lead neither to the N-year platform response nor to the N-year mooring force. Therefore, in order to reduce the level of conservatism as well as uncertainties involved in the traditional method the response-based method can be used as a reliable alternative approach. In this paper this method is described. In order to perform the calculations faster using large databases of sea states, Artificial Neural Networks (ANN) is designed and employed. In the paper the response-based method is applied to a 200,000 tdw FPSO and the results are discussed.  相似文献   

Design of a 3D Chirp Sub-bottom Imaging System     

Jonathan M. Bull  Martin Gutowski  Justin K. Dix  Timothy J. Henstock  Peter Hogarth  Timothy G. Leighton  Paul R. White 《Marine Geophysical Researches》2005,26(2-4):157-169

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.  相似文献   

假晴东方鲀人工育苗研究     

王新成  马道远 《海洋科学》1996,20(6):49-54

假晴东方鲀人工育苗获得４１．８ｍｍ种苗３５１０００尾，每立方水体出 苗８６０尾。越冬成活率９１．６％，增重率６１．８％。利用室内水泥池及养虾土池 养成商品鱼，分别获得１９６９ ｇ／ｍ３和 ２０８ ｋｇ／亩的收成。  相似文献   

海洋天然气水合物的地震识别方法研究   总被引：21，自引：2，他引：21  

马在田  耿建华  董良国  宋海斌 《海洋地质与第四纪地质》2002,22(1):1-8

天然气水合物作为21世纪新的自然能源将为人类的生存发展服务。20世纪60年代证实，俄罗斯西伯利亚的麦索亚哈气田为典型的天然气水合物形成的气田，70年代又在海底发现了固体天然气水合物岩样。1971年，RStoll首先将地震剖面中的似海底反向层解释为海洋天然气水合物存在的标志，后来被深海钻探证实，从此地震方法成为大面积研究天然气水合物的重要手段。天然气水合物既是潜在能源，也是影响环境和形成灾害的因素之一，因此，研究天然气水合物是人类在21世纪的重要课题。探讨海洋天然气水合物的地震识别方法，由于这项工作刚刚起步，还没有做出具体的成果，在此只能根据我们仅有的工作和参照国外分开的出版物，以及出国访问得到的有关资料进行分析，提出我们的一些基本设想，与各位专家探讨。  相似文献   

气相色谱指纹法在海上油污染源鉴别中的应用   总被引：4，自引：0，他引：4  

陈伟琪  张珞平 《海洋科学》2003,27(7):67-70

通过一个具体案例,探讨了气相色谱指纹法在海上油污染源鉴别中的应用。该鉴别方法基于样品的正构烷烃气相色谱指纹分析,选择既能表征油种固有特性,又受风化影响较小的正十七烷(n-C17)、正十八烷(n-C18)、姥鲛烷(phy)、植烷(phy)和正二十烷(n-C20)等特征烷烃作为判据,可信度大,而且整个操作流程短(一般不超过半天),较简便易行。  相似文献   

广东红海湾、珠江口及电白—阳江近海第四纪沉积     

康长生  杨胜明  廖志良 《热带海洋学报》1997,(1)

根据物探和钻探资料，研究区内第四纪沉积物可分为两部分，下部地震反射结构复杂，斜层理发育，粒度较粗，为晚更新世产物；上部的地震反射结构简单，呈水平状或近水平状结构，粒度较细，为全新世沉积。  相似文献