城市点云的区域生长三角网构建方法     

李晶晶  范大昭  耿弘毅  纪松 《测绘科学技术学报》2016,(1):65-70

成熟的倾斜摄影测量及密集匹配技术可获取密集的城市点云,对点云进行三角网构建是真三维建模的关键技术之一。提出了基于区域生长的三角网构建方法,使用双约束条件提高点云的搜索效率,基于点边表数据结构进行网格生长,利用夹角约束和三角形孔洞修补优化网格。实验证明,该方法获取的三角网能够准确地表达楼体、桥状建筑等在内的城市实体,网格优化后的孔洞比例约为1‰并且该方法具有一定的抗噪能力。  相似文献   

Response of low‐angle dunes to variable flow          下载免费PDF全文

Megan L. Hendershot  Jeremy G. Venditti  Ryan W. Bradley  Ray A. Kostaschuk  Michael Church  Mead A. Allison 《Sedimentology》2016,63(3):743-760

Current understanding of bedform dynamics is largely based on field and laboratory observations of bedforms in steady flow environments. There are relatively few investigations of bedforms in flows dominated by unsteadiness associated with rapidly changing flows or tides. As a consequence, the ability to predict bedform response to variable flow is rudimentary. Using high‐resolution multibeam bathymetric data, this study explores the dynamics of a dune field developed by tidally modulated, fluvially dominated flow in the Fraser River Estuary, British Columbia, Canada. The dunes were dominantly low lee angle features characteristic of large, deep river channels. Data were collected over a field ca 1·0 km long and 0·5 km wide through a complete diurnal tidal cycle during the rising limb of the hydrograph immediately prior to peak freshet, yielding the most comprehensive characterization of low‐angle dunes ever reported. The data show that bedform height and lee angle slope respond to variable flow by declining as the tide ebbs, then increasing as the tide rises and the flow velocities decrease. Bedform lengths do not appear to respond to the changes in velocity caused by the tides. Changes in the bedform height and lee angle have a counterclockwise hysteresis with mean flow velocity, indicating that changes in the bedform geometry lag changes in the flow. The data reveal that lee angle slope responds directly to suspended sediment concentration, supporting previous speculation that low‐angle dune morphology is maintained by erosion of the dune stoss and crest at high flow, and deposition of that material in the dune trough.  相似文献   

Smoothing and re-roughening processes: The geometric evolution of a single fault zone     

《Journal of Structural Geology》2016

The geometry of a fault zone exerts a major control on earthquake rupture processes and source parameters. Observations previously compiled from multiple faults suggest that fault surface shape evolves with displacement, but the specific processes driving the evolution of fault geometry within a single fault zone are not well understood. Here, we characterize the deformation history and geometry of an extraordinarily well-exposed fault using maps of cross-sectional exposures constructed with the Structure from Motion photogrammetric method. The La Quinta Fault, located in southern California, experienced at least three phases of deformation. Multiple layers of ultracataclasite formed during the most recent phase. Crosscutting relations between the layers define the evolution of the structures and demonstrate that new layers formed successively during the deformation history. Wear processes such as grain plucking from one layer into a younger layer and truncation of asperities at layer edges indicate that the layers were slip zones and the contacts between them slip surfaces. Slip surfaces that were not reactivated or modified after they were abandoned exhibit self-affine geometry, preserving the fault roughness from different stages of faulting. Roughness varies little between surfaces, except the last slip zone to form in the fault, which is the smoothest. This layer contains a distinct mineral assemblage, indicating that the composition of the fault rock exerts a control on roughness. In contrast, the similar roughness of the older slip zones, which have comparable mineralogy but clearly crosscut one another, suggests that as the fault matured the roughness of the active slip surface stayed approximately constant. Wear processes affected these layers, so for roughness to stay constant the roughening and smoothing effects of fault slip must have been approximately balanced. These observations suggest fault surface evolution occurs by nucleation of new surfaces and wear by competing smoothing and re-roughening processes.  相似文献   

顾及拓扑与尖角的分类矢量数据分组压缩算法   总被引：1，自引：1，他引：0  

宋正祥  周晓光  陈律余 《测绘科学》2016,41(11):98-103

针对现有拆分重组法对存在复杂内环以及复杂相交岛屿多边形的分类矢量数据的压缩结果中包含裂缝、重叠及大量尖锐夹角的问题,提出了一种顾及拓扑一致性与尖角的分组压缩方法。依据分类矢量数据中多边形与多边形及其内环的相交关系对矢量矢量数据分组,以修正后拆分重组法结合直接分割法和间接分割法对分类矢量数据分组压缩,压缩结果中不存在裂缝与重叠现象,维护了分类矢量数据的拓扑一致性;通过取回尖角点前后被删除的点,解决了压缩结果中尖角过多的问题。以Landsat8遥感影像分类矢量数据实验验证了文章算法,并与直接分割法、间接分割法、拆分重组法进行了对比分析,验证了本文方法的有效性。  相似文献   

An experimental study on water entry of asymmetric wedges     

《Applied Ocean Research》2016

The aim of the paper is to provide an experimental reference for investigation of asymmetric water entry of wedges. Parameters of the study include initial deadrise angle, inclination angle and impact speed. Initial deadrise angles of the wedges were 20° and 30° with inclination angles ranging from 0° to 15° in 5° increments. Wedges were freely fallen from three different heights. Time histories of impact pressure and body acceleration were recorded. Sampling rate of measurements were set to 25 KHz. Main configuration of each test including mass of the wedge and water level were kept unchanged during all experiments. Additionally, several calibration tests were conducted to assess the repeatability and accuracy of the recorded data. The experimental results are compared with different entry theories and other available experiments. The comparison shows a reasonable agreement and indicates that the inclination angle can dramatically affect the impact pressure experienced by the wedges. Finally, the results show that the traditional asymmetric theories are not appropriate for all inclination angles.  相似文献   

小入射角下海浪后向散射系数不对称性和各向异性分析验证     

王晓晨  万剑华  张振华  孟俊敏  范陈清 《海洋学报》2016,38(11):43-48

基于北京遥测技术研究所机载波谱仪实测数据以及ECMWF提供的风场数据,分析了不同风速条件下小入射角海浪平均后向散射系数不对称性与各向异性随入射角的变化特性,并对导致这一现象的原因进行了初步分析。结果表明:小入射角下,海浪平均后向散射系数随入射角增大呈现递减趋势并在18°时达到某一稳定值,之后基本维持不变;海浪后向散射系数不对称性与各向异性均随入射角增大呈现递增趋势,同样在18°增大至某一稳定值,之后基本维持不变;低风速条件下,海浪不对称性和各向异性与风速有关,且风速越大不对称性与各向异性越明显。  相似文献   

柴达木盆地1:50 000尕海镇幅水文地质图数据集   总被引：1，自引：1，他引：0       下载免费PDF全文

党学亚  曾庆铭  杨炳超  顾小凡 《中国地质》2018,45(S2):30-38

尕海镇幅位于柴达木盆地东北缘的巴音河山前平原,是1：50 000国际标准图幅。其水文地质图是根据中国地质调查局组织编制并即将颁布实施的《水文地质图编制规范（1：50 000）》的基本要求,结合区内发展建设的需求,利用2016年1：50 000水文地质调查最新获取的尕海镇幅钻孔抽水试验成果数据（本次施工以及收集已有钻孔资料共48个钻孔）,水化学（61个水样）、同位素（12个同位素样）和土壤易溶盐（55个土样）分析成果数据,地下水位统测成果数据（68个统测点）,以及已有资料与成果数据编制而成。编图以地下水系统理论和生态水文地质理论为指导,按地下水系统、水文地质结构、含水岩组及富水性、地下水补给-径流-排泄条件、地下水化学特征、地下水水位埋深与流场、地下水与生态植被关系、地下水开发利用等分类加工处理数据形成水文地质图数据集,使大量的信息在图面上以主图结合镶图的形式主次分明、层次清晰地加以展现,以便为当地水资源开发利用和生态环境保护提供直观易用的地下水资料支撑。  相似文献   

中国南部及邻区能源资源成矿区带数据集   总被引：1，自引：1，他引：0       下载免费PDF全文

游国庆  易荣龙  耿树方  陈炳蔚  庞健峰  杨志新  李佳林 《中国地质》2018,45(S1):66-75

能源矿产是国家安全和经济发展的战略资源,加强我国及周边地区油气和煤等能源资源的研究和开发利用意义重大。依据板块构造和大陆动力学以及油气与煤成藏地质学理论,以深部构造控制盆—山发育、盆—山耦合和热动力系统控制成矿的研究工作思路,应用70个油气田、471个煤田的基础地质资料,从沉积盆地发育的区域地质特征、成矿地质条件和成矿单元诸多方面,在地理信息系统（GIS）平台上提示了该区板块构造格局与能源资源的时空分布规律。中国南部及邻区能源资源可划分为3个成矿域,每个成矿域又可进一步划分为成矿省、含矿区（盆地）、矿田聚集区带、矿田（油气田）五个级别的成矿区域。数据集由构造带（断裂带和造山带）类型和时代、盆地类型和时代、能源矿产资源类型和丰度、成矿区带等元数据组成。该数据集是在区域大地构造研究的基础上,结合沉积盆地能源矿产（石油、天然气、煤）资源评价资料,综合分析成矿区带特征,利用地理信息系统（GIS）建立的一套完整的数据库,不仅是对中国南部及邻区区域地质认识和沉积盆地能源资源勘查工作成果的集成,而且为国家科学地引导地质找矿工作部署提供理论基础。  相似文献   

基于Hyperion高光谱数据和随机森林方法的岩性分类与分析     

柯元楚  史忠奎  李培军  张西雅 《岩石学报》2018,34(7):2181-2188

探索利用高光谱数据的岩性填图新方法是遥感地质应用领域的重要需求之一。本文运用随机森林方法和EO-1Hyperion高光谱数据,对新疆塔里木西北部柯坪地区的局部区域进行岩性分类,并对相关问题进行分析。分别利用光谱特征以及加入光谱一阶导数特征进行岩性分类,并对不同特征对岩性分类的重要性进行分析,同时与现有的基于光谱角制图方法(SAM)进行比较。结果表明,与SAM方法相比,随机森林方法得到了更高精度的岩性分类结果,是一种有效可行的岩性分类方法。根据特征重要性的排序,蓝绿光波段、短波红外波段以及相应的一阶导数特征对研究区Hyperion数据的沉积岩岩性分类贡献更大。  相似文献   

探地雷达宽角反射图形拟合方法     

蔡连初  缪念有 《物探与化探》2021,(1):239-244

探地雷达共中心点(CMP)法仅用于局部速度测试,为使用宽角反射法进行剖面探测,可固定一个雷达天线而将另一个天线沿测线移动,从而获取整个地质界面的反射信号。本文提出宽角反射剖面探测方法,基于平直岩层界面导出其反射信号的关系式,并开发出解释软件,可精确计算岩层几何参数和层速度,从而进行地质分层。  相似文献