Stratigraphic and regional distribution of fractures in Barremian–Aptian carbonate rocks of Eastern Oman: outcrop data and their extrapolation to Interior Oman hydrocarbon reservoirs     

G. Bertotti  A. Immenhauser  J. K. J. Taal-van Koppen 《International Journal of Earth Sciences》2005,94(3):447-461

The carbonates of the Barremian to Aptian Qishn Formation are outcrop equivalents to major hydrocarbon reservoirs in the Middle East and in Oman specifically. The rocks are exposed in the Haushi–Huqf area of eastern Oman where they are affected by pervasive jointing and localized folding and faulting. Information gathered in the Huqf outcrops can be used to formulate predictions on fracture patterns in adjacent reservoirs. Systematic joints are confined to few meters-thick intervals of widely differing lithologies, which can be correlated over hundreds of square kilometers. Over the entire area, systematic joints are typically more than tens of meters long, have spacings of 4–18 cm and homogeneous morphologies. These joints are interpreted to be of Late Aptian age. The dominant set of joints strikes consistently NW–SE and developed parallel to the causative maximum horizontal compression S_H. The direction of compression is at an high angle to the two major tectonic domains of the region, the subsiding Oman Interior basins and the elevated Haushi-Huqf High. NW–SE compression is proposed to have caused crustal/lithospheric buckling and thereby to have controlled Jurassic to Early Tertiary patterns of vertical movements. In such a scenario, the direction of compression is predicted to be constant over the entire domain. It is thus expected that Qishn carbonates in the subsiding Oman Interior basins also experienced NW–SE compression and developed systematic joints similar to those observed in the Huqf region. In the Neogene, with the establishment of the Zagros stress field, the maximum horizontal compression became roughly N–S, thereby possibly leading to the closure of pre-existing joint systems.  相似文献   

New evidence of extensive active mud volcanism in the Anaximander mountains (Eastern Mediterranean): The “ATHINA” mud volcano     

V. Lykousis  S. Alexandri  J. Woodside  P. Nomikou  C. Perissoratis  D. Sakellariou  G. de Lange  A. Dahlmann  D. Casas  G. Rousakis  D. Ballas  Chr. Ioakim 《Environmental Geology》2004,46(8):1030-1037

A 3000 km² multibeam survey was carried out on the eastern Anaximander Mountains (Mts), (Eastern Mediterranean). The objective was to obtain detailed bathymetry of known mud volcanoes and identify new sites of active mud volcanism in the area. N-NW of the Amsterdam Mud-Volcano (MV) several mounds and cone-like morphological irregularities with a height of few tens of meters to about one hundred meters were detected and considered as potential MVs on the basis of their distinctive backscattered character. A group of two mounds was selected, the northern mound was sampled, documented as active, and named accordingly Athina MV. These new findings strongly support the presence of extensive active mud volcanism in the Anaximander Mountains especially in the area north of the Amsterdam MV.GEM  相似文献   

Hydrothermal mixing,carbonate dissolution and sulfide precipitation in Mississippi Valley-type deposits   总被引：1，自引：0，他引：1  

Mercè?CorbellaEmail author  Carlos?Ayora  Esteve?Cardellach 《Mineralium Deposita》2004,39(3):344-357

A large number of Mississippi Valley-Type (MVT) deposits are located within dissolution zones in carbonate host rocks. Some genetic models propose the existence of cavities generated by an earlier event such as a shallow karstification, that were subsequently filled with hydrothermal minerals. Alternative models propose carbonate dissolution caused by the simultaneous precipitation of sulfides. These models fail to explain either the deep geological setting of the cavities, or the observational features which suggest that the dissolution of carbonates and the precipitation of minerals filling the cavities are not strictly coeval. We present a genetic model inspired by the textural characteristics of MVT deposits that accounts for both the dissolution of carbonate and precipitation of sulfides and later carbonates in variable volumes. The model is based on the mixing of two hydrothermal fluids with a different chemistry. Depending on the proportion of the end members, the mixture dissolves and precipitates carbonates even though the two mixing solutions are both independently saturated in carbonates. We perform reactive transport simulations of mixing of a regional groundwater and brine ascending through a fracture, both saturated in calcite, but with different overall chemistries (Ca and carbonate concentrations, pH, etc). As a result of the intrinsic effects of chemical mixing, a carbonate dissolution zone, which is enhanced by acid brines, appears above the fracture, and another zone of calcite precipitation builds up between the cavity and the surrounding rock. Sulfide forms near the fracture and occupies a volume smaller than the cavity. A decline of the fluid flux in the fracture would cause the precipitation of calcite within the previously formed cavities. Therefore, dissolution of carbonate host rock, sulfide precipitation within the forming cavity, and later filling by carbonates may be part of the same overall process of mixing of fluids in the carbonate host rock.Editorial handling: C. Everett  相似文献   

杭州市空气负离子变化特征分析     

齐冰  杜荣光  邵碧嘉 《气象与减灾研究》2012,(4):68-71

利用2008—2010年杭州西溪湿地和馒头山空气负离子观测资料,分析了杭州市空气负离子的季、月和日变化特征,以及空气负离子与气象环境因子的相关关系。结果表明,湿地负离子浓度要好于市区;杭州市空气负离子浓度冬季最大,夏季最小;一日中早晨空气负离子浓度最高,15时左右最低;夜间高于白天。空气负离子浓度与温度、日照时数和空气污染物呈负相关,与相对湿度、风速、云量和降雨量呈正相关。  相似文献   

Geochemical constraints on the modes of carbonate precipitation in peridotites from the Logatchev Hydrothermal Vent Field and Gakkel Ridge     

Benjamin Eickmann  Wolfgang Bach  Martin Rosner  Jrn Peckmann 《Chemical Geology》2009,268(1-2):97-106

The ultramafic-hosted Logatchev Hydrothermal Field (LHF) at 15°N on the Mid-Atlantic Ridge and the Arctic Gakkel Ridge (GR) feature carbonate precipitates (aragonite, calcite, and dolomite) in voids and fractures within different types of host rocks. We present chemical and Sr isotopic compositions of these different carbonates to examine the conditions that led to their formation. Our data reveal that different processes have led to the precipitation of carbonates in the various settings. Seawater-like ⁸⁷Sr/⁸⁶Sr ratios for aragonite in serpentinites (0.70909 to 0.70917) from the LHF are similar to those of aragonite from the GR (0.70912 to 0.70917) and indicate aragonite precipitation from seawater at ambient conditions at both sites. Aragonite veins in sulfide breccias from LHF also have seawater-like Sr isotope compositions (0.70909 to 0.70915), however, their rare earth element (REE) patterns show a clear positive europium (Eu) anomaly indicative of a small (< 1%) hydrothermal contribution. In contrast to aragonite, dolomite from the LHF has precipitated at much higher temperatures (~ 100 °C), and yet its ⁸⁷Sr/⁸⁶Sr ratios (0.70896 to 0.70907) are only slightly lower than those of aragonite. Even higher temperatures are calculated for the precipitation of deformed calcite veins in serpentine–talc fault schists form north of the LHF. These calcites show unradiogenic ⁸⁷Sr/⁸⁶Sr ratios (0.70460 to 0.70499) indicative of precipitation from evolved hydrothermal fluids. A simple mixing model based on Sr mass balance and enthalpy conservation indicates strongly variable conditions of fluid mixing and heat transfers involved in carbonate formation. Dolomite precipitated from a mixture of 97% seawater and 3% hydrothermal fluid that should have had a temperature of approximately 14 °C assuming that no heat was transferred. The much higher apparent precipitation temperatures based on oxygen isotopes (~ 100 °C) may be indicative of conductive heating, probably of seawater prior to mixing. The hydrothermal calcite in the fault schist has precipitated from a mixture of 67% hydrothermal fluid and 33% seawater, which should have had an isenthalpic mixing temperature of ~ 250 °C. The significantly lower temperatures calculated from oxygen isotopes are likely due to conductive cooling of hydrothermal fluid discharging along faults. Rare earth element patterns corroborate the results of the mixing model, since the hydrothermal calcite, which formed from waters with the greatest hydrothermal contribution, has REE patterns that closely resemble those of vent fluids from the LHF. Our results demonstrate, for the first time, that (1) precipitation from pure seawater, (2) conductive heating of seawater, and (3) conductive cooling of hydrothermal fluids in the sub-seafloor all can lead to carbonate precipitation within a single ultramafic-hosted hydrothermal system.  相似文献   

Sequence stratigraphy and architecture of a late Early–Middle Aptian carbonate platform succession from the western Maestrat Basin (Iberian Chain, Spain)     

Telm Bover-Arnal  Ramon Salas  Josep A. Moreno-Bedmar  Klaus Bitzer 《Sedimentary Geology》2009,219(1-4):280-301

The attributes of a ‘four-systems-tract’ sequence are at times difficult to identify in outcrop-scale carbonate successions. Poor exposure conditions, variable rates of sediment production, erosion and/or superposition of surfaces that are intrinsic to the nature of carbonate systems frequently conceal or remove its physical features. The late Early–Middle Aptian platform carbonates of the western Maestrat Basin (Iberian Chain, Spain) display facies heterogeneity enabling platform, platform-margin and slope geometries to be identified, and provide a case study that shows all the characteristics of a quintessential four systems tract-based sequence. Five differentiated systems tracts belonging to two distinct depositional sequences can be recognized: the Highstand Systems Tract (HST) and Forced Regressive Wedge Systems Tract (FRWST) of Depositional Sequence A; and the Lowstand Prograding Wedge Systems Tract (LPWST), Transgressive Systems Tract (TST) and subsequent return to a highstand stage of sea-level (HST) of Depositional Sequence B. An extensive carbonate platform of rudists and corals stacked in a prograding pattern marks the first HST. The FRWST is constituted by a detached, slightly cross-bedded calcarenite situated at the toe of the slope in a basinal position. The LPWST is characterized by a small carbonate platform of rudists and corals downlapping over the FRWST and onlapping landwards. The TST exhibits platform backstepping and marly sedimentation. Resumed carbonate production in shelf and slope settings characterizes the second HST. A basal surface of forced regression, a subaerial unconformity, a correlative conformity, a transgressive surface and a maximum flooding surface bound these systems tracts, and are well documented and widely mappable across the platform-to-basin transition area analyzed. Moreover, the sedimentary succession studied is made up of four types of parasequence that constitute stratigraphic units deposited within a higher-frequency sea-level cyclicity. Ten lithofacies associations form these basic accretional units. Each facies assemblage can be ascribed to an inferred depositional environment in terms of bathymetry, hydrodynamic conditions and trophic level. The architecture of the carbonate platform systems reflects a flat-topped non-rimmed depositional profile. Furthermore, these carbonate shelves are interpreted as having been formed in low hydrodynamic conditions. The long-term relative fall in sea-level occurred during the uppermost Early Aptian, which subaerially exposed the carbonate platform established during the first HST and resulted in the deposition of the FRWST, is interpreted as one of global significance. Moreover, a possible relationship between this widespread sea-level drop and glacio-eustasy seems plausible, and could be linked to the cooling event proposed in the literature for the late Early Aptian. Because of the important implications in sequence stratigraphy of this study, the sedimentary succession analyzed herein could serve as an analogue for the application of the four-systems-tract sequence stratigraphic methodology to carbonate systems.  相似文献   

Matrix micrite δC and δO reveals synsedimentary marine lithification in Upper Jurassic Ammonitico Rosso limestones (Betic Cordillera, SE Spain)     

Rute Coimbra  Adrian Immenhauser  Federico Olriz 《Sedimentary Geology》2009,219(1-4):332-348

Matrix micrites are a commonly used carbonate archive for the reconstruction of past environmental parameters, but one that is submitted to known limitations. Main reasons for the often ambiguous value of many micrite-based isotope data sets are the unknown origin of the micrite components and their poorly resolved diagenetic history. Here we present carbon and oxygen-isotope data retrieved from Oxfordian to Tithonian Ammonitico Rosso nodular micrites sampled from three sections in the Betic Cordillera (Southern Spain). All three sections were correlated and sampled using a rigorous biostratigraphic framework. A noteworthy feature is that analyzed matrix micrites are more conservative in terms of their isotopic composition than other carbonate materials commonly considered to resist diagenetic alteration under favourable circumstances. Remarkably, this refers not only to δ¹³C ratios, which reflect the typical Late Jurassic global trend, but also to δ¹⁸O ratios that range around 0.3‰. The ¹⁸O-enriched oxygen-isotope ratios are considered to represent diagenetic stabilization of carbonate ooze under the influence of marine porewaters within the sediment–water interphase (i.e., the immature sedimentary section, usually submitted to biogenic activity). This interpretation agrees with the very early lithification of micrite nodules with cements precipitated from marine porewaters, enriched by the dissolution of aragonite skeletals (i.e., ammonite shells). According to the model proposed, low sedimentation rates as well as rapid early marine differential cementation, under the influence of currents and seawater pumping, affected the sediment–water interphase of epioceanic swells where deposition resulted in early lithified Ammonitico Rosso facies. The data obtained show that special care must be taken to prevent oversimplified interpretations of carbonate archives, particularly in the context of epioceanic settings.  相似文献   

Facies analysis and palaeoenvironmental interpretation of the Late Oligocene Attard Member (Lower Coralline Limestone Formation), Malta     

MARCO BRANDANO  VIRGILIO FREZZA  LAURA TOMASSETTI  MARTYN PEDLEY†  RUGGERO MATTEUCCI 《Sedimentology》2009,56(4):1138-1158

The Oligocene represents a key interval during which coralline algae became dominant on carbonate ramps and luxuriant coral reefs emerged on a global scale. So far, few studies have considered the impact that these early reefs had on ramp development. Consequently, this study aimed at presenting a high‐resolution analysis of the Attard Member of the Lower Coralline Limestone Formation (Late Oligocene, Malta) in order to decipher the internal and external factors controlling the architecture of a typical Late Oligocene platform. Excellent exposures of the Lower Coralline Limestone Formation occurring along continuous outcrops adjacent to the Victoria Lines Fault reveal in detail the three‐dimensional distribution of the reef‐associated facies. A total of four sedimentary facies have been recognized and are grouped into two depositional environments that correspond to the inner and middle carbonate ramp. The inner ramp was characterized by a very high‐energy, shallow‐water setting, influenced by tide and wave processes. This setting passed downslope into an inner‐ramp depositional environment which was colonized by seagrass and interfingered with adjacent areas containing scattered corals. The middle ramp lithofacies were deposited in the oligophotic zone, the sediments being generated from combined in situ production and sediments swept from the shallower inner ramp by currents. Compositional characteristics and facies distributions of the Attard ramp are more similar to the Miocene ramps than to those of the Eocene. An important factor controlling this similarity may be the expansion of the seagrass colonization within the euphotic zone. This expansion may have commenced in the Late Oligocene and was associated with a concomitant reduction in the aerial extent of the larger benthonic foraminifera facies. Stacking‐pattern analysis shows that the depositional units (parasequences) at the study section are arranged into transgressive–regressive facies cycles. This cyclicity is superimposed on the overall regressive phase recorded by the Attard succession. Furthermore, a minor highstand (correlated with the Ru4/Ch1 sequence) and subsequent minor lowstand (Ch2 sequence) have been recognized. The biota assemblages of the Attard Member suggest that carbonate sedimentation took place in subtropical waters and oligotrophic to slightly mesotrophic conditions. The apparent low capacity of corals to form wave‐resistant reef structures is considered to have been a significant factor affecting substrate stability at this time. The resulting lack of resistant mid‐ramp reef frameworks left this zone exposed to wave and storm activity, thereby encouraging the widespread development of coralline algal associations dominated by rhodoliths.  相似文献   

Taconic Orogeny in Pennsylvania: A 15 –20 m.y. Apennine-style Ordovician event viewed from its Martic hinterland     

Donald U. Wise  G. Robert Ganis   《Journal of Structural Geology》2009,31(9):887

In Pennsylvania, the Taconic Orogeny lasted from 461 to 443 Ma as Cambro-Ordovician slope deposits were deformed into mountains edging the Laurentian craton at the same time that materials from an adjacent deep-water basin were being transported 50 –70 km across a carbonate platform into foreland basins. This paper focuses on shelf-edge hinterland features, mostly the Martic Zone as a folded, stack of imbricate thrust sheets of slope materials that corresponds to Vermont's Taconic Mountains and Southern Quebec's zone of Taconic allochthons. Work of the last century is summarized, corrected, and combined with a new 450 Ma radiometric date and fluid inclusion data from the Pequea Mine within the Martic Zone. These and abundant new graptolite and conodont dates in the foreland paint a revised Pennsylvania picture differing from the northern Taconic areas. Differences are: (1) transport of very large allochthonous masses of deep-water material, the Dauphin Formation, far across the carbonate platform, and (2) deformation migrating progressively across that platform during a 15 –20 m.y. period, incorporating it and its foreland cover into alpine-scale, recumbent folds and thrusts. The scenario has many analogies to Italy's modern Apennine Mountains minus the Latian volcanics.  相似文献   

多尺度孔隙岩石的核磁共振扩散耦合现象及其探测方法     

田志 《地球物理学报》2021,64(3):1119-1130

油藏岩石的孔隙连通性是反映流体渗流难易程度的重要参数,对渗透率、有效孔隙度等岩石物理参数的评价具有重要作用.连通的孔隙中,核磁共振(NMR)弛豫的交换会产生扩散耦合现象,可作为孔隙连通性的表征和探测方法.本文提出利用横向弛豫T 2-T 2脉冲序列测量岩石的扩散耦合现象.运用随机游走方法模拟多孔岩石的核磁共振响应特征,分析扩散耦合的影响因素,推导表征扩散耦合强度的弛豫交换速率计算公式.结果表明:孔隙间的扩散耦合强度与T 2-T 2脉冲序列的混合时间呈正相关性,基于双孔弛豫交换模型推导的弛豫交换速率计算公式能够准确表征双尺度孔隙系统的扩散耦合强度.在孔隙尺寸不满足快扩散条件时,会出现与扩散耦合无关的非对角峰信号.针对含多类型孔隙的碳酸盐岩模型,随混合时间的增加,扩散耦合强度变大,一维T 2谱的形态畸变程度加重,在T 2-T 2二维谱中,代表微裂缝、粒间小孔、溶蚀大孔的信号能量变化趋势不同,反映不同类型孔隙间的连通性存在差异.本文的分析与讨论丰富了核磁共振弛豫在岩石物理性质评价中的应用方向,对利用核磁共振评价复杂孔隙岩石的孔隙结构和连通性提供了新思路和新方法.  相似文献