确定连续系统参数的时域方法     

刘若峰  胡沂清 《中国海洋大学学报(自然科学版)》1995,(Z1)

提出一种确定连续系统参数的时域方法。该方法利用方波输入和系统稳定性，离析出输出采样信号与结构参数的内在联系，推导出确定连续系统结构参数的算法．指出该算法与辨识方法相结合，可实现对含随机干扰的连续系统结构参数的估计．  相似文献   

Nonlinear coupled dynamic response of offshore Spar platforms under regular sea waves     

A. K. Agarwal  A. K. Jain 《Ocean Engineering》2003,30(4):492-551

Many innovative floating offshore structures have been proposed for cost effectiveness of oil and gas exploration and production in water depths exceeding one thousand meters in recent years. One such type of platform is the offshore floating Spar platform. The Spar platform is modelled as a rigid body with six degrees-of-freedom, connected to the sea floor by multi-component catenary mooring lines, which are attached to the Spar platform at the fairleads. The response dependent stiffness matrix consists of two parts (a) the hydrostatics provide restoring force in heave, roll and pitch, (b) the mooring lines provide the restoring force which are represented here by nonlinear horizontal springs. A unidirectional regular wave model is used for computing the incident wave kinematics by Airy’s wave theory and force by Morison’s equation. The response analysis is performed in time domain to solve the dynamic behavior of the moored Spar platform as an integrated system using the iterative incremental Newmark’s Beta approach. Numerical studies are conducted for sea state conditions with and without coupling of degrees-of-freedom.  相似文献   

Behavior of Pile Groups under Lateral Load   总被引：2，自引：0，他引：2  

Yang Keji  Li Qixin Wang Fuyuan Associate Proferssor  Hehai University  Nanjing Engineer  Hehai University  Nanjing 《中国海洋工程》1991,(2)

Based on investigation and model tests, and in combination with the research work on group effect for pile groups under lateral loads relating to the code of fixed offshore platforms, a series of studies have been performed on the behavior and failure mechanism of laterally loaded pile groups, critical pile spacing inducing group effect, lateral bearing capacity of pile groups and its main influence factors, the stress-strain relationship for single piles and pile groups and so on. Some new laws about non-uniformity of load distribution in the longitudinal direction of pile groups and load-deflection (p - y) curves for pile groups have been discovered, and an empirical formula is presented in order to remedy the defect of current calculating methods at home and abroad. These results can be used for reference in the design of pile foundation under lateral loads.  相似文献   

中分辨率成像光谱仪数据的滩涂环境遥感应用能力研究   总被引：2，自引：1，他引：2  

李四海  王华  刘振民  韩震 《海洋测绘》2005,25(2):30-33

以长江口海岸带地区为示范区，探讨了我国中分辨率成像光谱仪(CMODIS)的滩涂及水体图像特征。结合地面现场观测和图像处理结果，评价了其在滩涂环境遥感中的应用能力。  相似文献   

利用消去刚度法进行剪切型系统物理参数识别     

王树青  李华军 《中国海洋大学学报(自然科学版)》2004,34(6):1085-1089

提出了 1种能够比较准确地识别剪切型体系的结构参数 (各层质量和层间刚度 )的方法———消去刚度法。该方法从剪切型结构体系的特征值问题出发 ,利用剪切型结构系统质量矩阵和刚度矩阵的特殊形式 ,通过消去各层的刚度系数 ,得到了结构系统的各层质量比表达式。在结构总质量已知的情况下 ,仅利用系统的任意两阶模态信息就可以确定出各层质量 ,并进而计算出层间刚度 ,实现了结构物理参数的递推识别。数值模拟结果表明 ,该方法识别精度较高 ,便于工程应用 ,可以用于类似结构体系的物理参数的初步估计。  相似文献   

基于塑性极限分析理论和神经网络响应面的结构系统可靠性分析     

闫宏生  胡云昌 《海洋工程》2003,21(2):1-7

根据多层神经网络映射存在定理，提出了基于神经网络响应面和塑性极限分析理论的结构系统可靠性分析的新方法。数值试验表明，该方法可以快速、高质量地求出结构系统可靠性指标，是一个具有发展前景的新方法。  相似文献   

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin   总被引：1，自引：1，他引：1  

Michael Riedel 《Marine Geophysical Researches》2007,28(4):355-371

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.  相似文献   

冲绳海槽至马里亚纳海沟重力异常和地壳结构的初步研究     

王述功  高仰 《海洋科学》1989,13(2):24-27

根据我们实测的水深、重力连续剖面资料,计算了自东海至北斐济盆地的地壳厚度。本文旨在对冲绳海槽至马里亚纳海沟的重力异常和地壳结构进行初步的研究。该地段位于太平洋板块俯冲带以西,构造活动十分复杂、剧烈,并含有多种类型的地壳结构。  相似文献   

Ultimate strength of ship hulls under torsion     

Jeom Kee Paik  Anil K. Thayamballi  P. Terndrup Pedersen  Young Il Park 《Ocean Engineering》2001,28(8):51

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical analyses, it is shown that the influence of torsion induced warping stresses on the ultimate hull girder bending strength is small for ductile hull materials while torsion induced shear stresses will of course reduce the ship hull ultimate bending moment.  相似文献   

南海中建南盆地构造样式分析   总被引：2，自引：0，他引：2  

陈玲 《海洋地质与第四纪地质》2006,26(1):53-58

中建南盆地是发育于南海西部陆缘我国传统疆界线附近的新生代沉积盆地,大部分区域位于我国传统疆界线内。在对盆地近万千米多道地震资料综合分析解释的基础上,对盆地的主要构造样式以及它们与油气的关系进行了分析,结果表明,盆地分布面积广,沉积厚度大,油气前景良好。盆地是属于早期断陷、后期经走滑改造而成的复合型盆地,其构造演化经历了3个阶段,不同的阶段发育不同的构造样式:早期为断陷阶段,伸展型构造样式发育;中期为断坳—压扭或走滑反转阶段,产生走滑或压扭性构造样式;晚期为区域沉降阶段,以垂向沉积为主,无明显的构造样式发育。  相似文献