基于面向对象的空间目标3维交互式建模的设计     

山海涛郭建星  翟辉琴张保明 《测绘学院学报》2004,21(3):205-207

3维数据模型的建立是实现真3维GIS的一个核心问题。在充分分析现有3维数据模型的基础上，比较了传统模型的优缺点。针对空间目标建模的特点，设计了一种面向对象的3维数据模型。考虑到软件的实用性和可扩展性，着重论述了3维交互式设计及数据管理。  相似文献   

工业测量数据的可视化方法研究   总被引：1，自引：0，他引：1  

贺磊黄桂平  李广云毛悦 《测绘学院学报》2004,21(4):305-307,310

简要介绍了测量获取离散点数据的一般手段，阐述了3维曲面重建的NURBS方法和空间Delauany三角剖分方法，简要说明了使用OpenGL进行3维开发的机制，并给出了3维空间交互和查询的实现步骤。为有效地发掘测量数据潜在的信息和规律提供了一条新的途径。  相似文献   

基于二维直接线性变换的数字相机畸变模型的建立   总被引：10，自引：3，他引：10  

冯文灏  李建松  闫利 《武汉大学学报(信息科学版)》2004,29(3):254-258

提出并论证了基于二维直接线性变换的畸变的校正方法。本方法特别适用于各类固态摄像机(CCD、CID、PSD)的畸变模型的建立，以补偿各类像点系统误差。  相似文献   

地球重力场、重力、重力梯度在三维直角坐标系中的表达式     

陈俊勇 《武汉大学学报(信息科学版)》2004,29(5):377-379

现代卫星重力测量主要利用星载GPS接收机、加速度计、星载测距仪等来确定重力卫星的轨道 ,削弱非保守力的干扰 ,由此根据卫星的位置、速度及其变率来确定地球重力场。而上述GPS等星载仪器所提供的数据 ,包括卫星轨道坐标及其速率、扰动加速度、星间距离及其变率 ,都是以三维直角坐标 (x ,y ,z)的形式表示的 ,因此 ,地球重力场、重力和重力梯度在三维直角坐标系中的表达式在卫星重力解算中具有实际意义  相似文献   

Inversions for MT data in 2D symmetrical anisotropic media     

杨长福  林长佑  孙崇赤  李清河 《地震学报(英文版)》2005,18(3):361-367

Introduction Ready and Renkin (1971) were the first to make the research on anisotropy problems in magnetotellurics (MT). The progress in the research is not evident because it is more complex and difficult than isotropic problems. Now, the one-dimensional (1D) anisotropy problems in MT have been well solved, while for the two-dimensional (2D) cases, the numerical solutions have only been obtained for some particular conditions (Ready and Renkin, 1975). As to the three-dimensional (3D) ani…  相似文献   

3D and 4D controls on carbonate depositional systems: sedimentological and sequence stratigraphic analysis of an attached carbonate platform and atoll (Miocene, Níjar Basin, SE Spain)     

GEORG WARRLICH†  DAN BOSENCE†  DAVE WALTHAM† 《Sedimentology》2005,52(2):363-389

This study investigates the controls on three-dimensional stratigraphic geometries and facies of shallow-water carbonate depositional sequences. A 15 km² area of well-exposed Mid to Late Miocene carbonates on the margin of the Níjar Basin of SE Spain was mapped in detail. An attached carbonate platform and atoll developed from a steeply sloping basin margin over a basal topographic unconformity and an offshore dacite dome (Late Miocene). The older strata comprise prograding bioclastic (mollusc and coralline algae) dominated sediments and later Messinian Porites reefs form prograding and downstepping geometries (falling stage systems tract). Seven depositional sequences, their systems tracts and facies have been mapped and dated (using Sr isotopes) to define their morphology, stratigraphic geometries, and palaeo-environments. A relative sea-level curve and isochore maps were constructed for the three Messinian depositional sequences that precede the late Messinian evaporative drawdown of the Mediterranean. The main 3D controls on these depositional sequences are interpreted as being: (i) local, tectonically driven relative sea-level changes; (ii) the morphology of the underlying sequence boundary; (iii) the type of carbonate producers [bioclastic coralline algal and mollusc-dominated sequences accumulated in lows and on slopes of < 14° whereas the Porites reef-dominated sequence accumulated on steep slopes (up to 25°) and shallow-water highs]. Further controls were: (iv) the inherited palaeo-valleys and point-sourced clastics; (v) the amount of clastic sediments; and (vi) erosion during the following sequence boundary development. The stratigraphy is compared with that of adjacent Miocene basins in the western Mediterranean to differentiate local (tectonics, clastic supply, erosion history, carbonate-producing communities) versus regional (climatic, tectonic, palaeogeographic, sea-level) controls.  相似文献   

Multi-dimensional Seismic Response Analysis of Base-Isolated Frame Structure with 3D Isolator   总被引：1，自引：0，他引：1  

XiongShishu HuangLiting ChenJinfeng SuJingsu 《中国地质大学学报(英文版)》2005,16(1):66-71,78

INTRODUCTIONAs a new and effective method for withstandingthe horizontal component of earthquake motion on abuilding structure, the base isolation technique hascome to the engineering application phase ( Hu,1988). However, for some important buildings andfoundation facilities in an earthquake region, it is im portant to consider the effects of 3D aseismatic analy sis, including the vertical component, due to themulti dimensional characteristics of earthquakes (Suand …  相似文献   

Modélisation géométrique 3D des granites stéphaniens du massif du Pelvoux (Alpes,France)     

Pierre Strzerzynski  Stéphane Guillot  Gabriel Courrioux  Patrick Ledru 《Comptes Rendus Geoscience》2005,337(14):1284-1292

The structural analysis and the 3D modelling of Stephanian granites of the Pelvoux Massif characterize an emplacement along sinistral NW–SE- and dextral NE–SW-trending shear zones in the Pelvoux and in the Aiguilles Rouges–Mont Blanc Massifs, respectively. This Carboniferous shear system is consistent with a north–south extension direction known in the whole Variscan belt at this time. To cite this article: P. Strzerzynski et al., C. R. Geoscience 337 (2005).  相似文献   

Intraplate deformation and 3D rheological structure of the Rhine Rift System and adjacent areas of the northern Alpine foreland   总被引：4，自引：0，他引：4  

S. Cloetingh  P. A. Ziegler  F. Beekman  P. A. M. Andriessen  N. Hardebol  P. Dèzes 《International Journal of Earth Sciences》2005,94(4):758-778

The lithosphere of the Northern Alpine foreland has undergone a polyphase evolution during which interacting stress-induced intraplate deformation and upper mantle thermal perturbations controlled folding of the thermally weakened lithosphere. In this paper we address relationships among deeper lithospheric processes, neotectonics and surface processes in the Northern Alpine foreland with special emphasis on tectonically induced topography. We focus on lithosphere memory and neotectonics, paying special attention to the thermo-mechanical structure of the Rhine Graben System and adjacent areas of the northern Alpine foreland lithosphere. We discuss implications for mechanisms of large-scale intraplate deformation and links with surface processes and topography evolution.  相似文献   

体绘制技术在地学3D GIS 可视化中的应用研究   总被引：1，自引：0，他引：1  

徐绘宏  潘懋 《地理与地理信息科学》2005,21(2):6-9

体绘制技术是目前科学计算可视化研究的一个重要组成部分，对地质体内部属性分布的可视化有重要意义。该文针对地学研究中几何建模和属性建模同样重要的特点，基于一种矢栅一体化的混合数据模型，对地质体表面采用三角面片描述几何形状，对地质体内部采用基于八叉树的自适应网格剖分技术描述内部属性特征。对网格剖分后的体数据，采用体元投射的体绘制技术进行地质体内部属性可视化，显示出很好的效果，具有实际应用意义。  相似文献