Speciation analysis and significance of ecological geochemistry     

Yaping WANG Chunxue XU Ziyi AN Suming WANG 《中国地球化学学报》2006,25(B08):205-205

Different species of one element have different activities, so it has different effects on environment and human health. To analyze qualitatively and quantitatively the speciation of a special element in sample, which is the important basis for appraising the toxicity and studying the rule of transfer and translation of elements. Since the 1970＇s, the scheme of sequential extraction has already been used at many laboratories both at home and abroard, to get the information about heavy metals＇ activity in polluted soils. Because this method has the experimental nature, many schemes of problem has taken place, the absence of consistency of these sequential extraction have been formed. Thus the complexity of the schemes, the lack of selectivity of reagent, the lack of quality control, the result mainly related to the extraction scheme used, and so on. In the face of these problems, the study of experimental methods of sequential extraction on three different soils, sediment in Dongting Lake, soil in Jiangsu Province and loess in Shanxi Province was made. Reference materials of heavy metal speciation following sequential extraction in soil and sediment had been developed. Nowadays two kinds of sequential extraction methods which are widely used are BCR （three steps） and improved Tessier methods （seven steps）. Based on three steps of BCR, water-soluble speciation and the residual speciation were increased in our research. BCR701 was determined eight times at different laboratories using BCR three steps. The results showed that determined data obtained eight times were identical to the standard value, and it is indicated that this method has good reproducibility. The stability and homogeneity experiments indicated that the preparation of three types of candidates accorded with our requirements. Eight laboratories had afforded the determined values of 12 heavy metal elements （Cu, Pb, Zn, Mn, Co, Ni, Cd, Cr, Mo, As, Sb, Hg, Se et al.） using BCR three steps. Also, these three candidates afforded the determined values by seven steps, and 12 laboratories had participated.  相似文献   

Preparation of a geotechnical microzonation model using Geographical Information Systems based on Multicriteria Decision Analysis   总被引：3，自引：0，他引：3  

a&#x;l Kolat  Vedat Doyuran  Can Ayday  M. Lütfi Süzen 《Engineering Geology》2006,87(3-4):241-255

The purpose of this study is to develop a geotechnical microzonation model using Geographical Information Systems (GIS) based on Multicriteria Decision Analysis (MCDA). As study area, the Eskişehir downtown area has been chosen. Eskişehir is one of the most rapidly growing cities in central Turkey. The model inputs include slope, flood susceptibility, soil, depth to groundwater table, swelling potential, and liquefaction potential. The weight and rank values are assigned to the layers and to the classes of each layer respectively. The assignment of the weight/rank values and the analysis are realized by the application of two different decision models, namely Simple Additive Weighting (SAW) and Analytic Hierarchy Process (AHP) methods. The geotechnical microzonation maps prepared as outputs of these methods are found to be consistent with each other and confirmed by the experts within the study area. The geotechnical microzonation map prepared using the AHP method is recommended as the final map of the study.  相似文献   

Assessment of mercury mobility and bioavailability by fractionation method in sediments from coastal zone inundated by the 26 December 2004 tsunami in Thailand     

Leonard Boszke  Artur Kowalski  Witold Szczuciński  Grzegorz Rachlewicz  Stanisław Lorenc  Jerzy Siepak 《Environmental Geology》2006,51(4):527-536

The 26 December 2004 tsunami covered significant portion of a coastal zone with a blanket of potentially contaminated sediments. In this report are presented results on mercury concentrations in sediments deposited by the tsunami in a coastal zone of Thailand. Since the total mercury concentrations are insufficient to assess mercury mobility and bioavailability in sediment, its fractionation was applied. Sediments were sampled within 50 days after the event and analyzed by sequential extraction method. The procedure of sequential extraction involved five subsequent stages performed with solutions of chloroform, deionized water, 0.5 M HCl, 0.2 M NaOH, and aqua regia. The mean concentration of total mercury in sediments was 119 ± 50 ng g⁻¹ dry mass (range 66–230). The fractionation revealed that mercury is mainly bound to the least bioavailable sulphides 75 ± 6% (range 62–86), organomercury compounds 14 ± 7% (range 4–26), and humic matter 9 ± 7% (range 1–27). The lowest contributions bring fractions of water-soluble mercury 0.8 ± 1.0% (range 0.1–3.6) and acid soluble mercury 0.9 ± 0.5% (range 0.2–2.1). Although, the total mercury content is similar in a reference sample and in the tsunami sediments, the highly toxic organomercury fraction contribution is higher in the latter. The results were compared with chemical and sedimentological properties of the sediments but no significant correlations were obtained between them.  相似文献   

Distribution of cadmium, chromium, copper, lead and zinc in marine sediments in Hong Kong waters     

S. C. Choi  Onyx W. H. Wai  Thomas W. H. Choi  X. D. Li  C. W. Tsang 《Environmental Geology》2006,51(3):455-461

Partitioning of heavy metals (Cd, Cr, Cu, Pb, Zn) in marine sediments collected from various sites in Hong Kong waters were determined using sequential extraction method. Sediments from Kellette Bank, located in Victoria Harbour, had higher metal concentrations especially Cu and Zn than most other sites. Slightly over 20% of total Cu and Cr existed as readily available forms in Peng Chau and Kellette Bank. At most sampling sites, over 15% of the Cu existed as the exchangeable form indicating that Cu could be readily released into the aqueous phase from sediments. A significantly higher percentage of Pb and Zn was associated with the three non-residual fractions. Hence, there is a greater environmental concern for remobilization of Pb and Zn compared with Cr. The high amount of residual Cd (>50%) and the relatively lower Cd content indicate that little environmental concern is warranted for the remobilization of Cd. Distribution of metals in sediments collected from different depth at Kellette Bank shows that metal concentrations decreased with profile depth. The levels of Pb and Zn associated with the two readily available fractions increased sharply in the surface sediment. These metals represented the pollutants, which were introduced into the area in the mid-eighties through early nineties as a result of rapid economic and industrial development in the territory. As significant portions of these metals were bound to the readily available phases in the surface sediments, metal remobilization could be a concern. An erratum to this article can be found at  相似文献   

Strain softening of K0-consolidated Changi sand under plane-strain conditions     

D. Wanatowski  J. Chu 《Acta Geotechnica》2006,1(1):29-42

Experimental results are presented in this paper to study the strain softening behaviour of a marine dredged sand under plane-strain conditions. K₀ consolidated drained and undrained tests were conducted using a new plane-strain apparatus to characterize the strain softening behaviour of the sand under plane-strain conditions. For medium dense specimens, strain softening and shear bands were observed to occur under both drained and undrained conditions. For very loose specimens, no shear bands were observed and critical states were reached within the homogeneous deformation region in both drained and undrained tests. Strain softening was observed to occur at small strain for very loose specimens under undrained conditions. Two types of strain softening, the homogenous softening and banding softening, were identified and the conditions for strain softening were established. The results obtained from this study were compared with the studies by Han and Vardoulakis (Géotechnique 41(1):49–78, 1991), Finno et al. (J Geotech Eng ASCE 122(6):462–473, 1996, Géotechnique 47(1):149–165, 1997) and Mokni and Desrues (Mech Cohes-Frict Mat 4:419–441, 1998).  相似文献   

Vertical variation of phosphorus forms in surface sediments from Wuli Bay, Taihu Lake, China   总被引：1，自引：0，他引：1  

李军  刘丛强  王仕禄  朱兆洲  周志华  肖化云 《中国地球化学学报》2006,25(3):279-284

1IntroductionPhosphorus,an essential nutrient for the primaryproductivity in freshwater systems,is an important fac-tor controlling lacustrine eutrophication.Although ex-ternal input of phosphorus has been assumed as the vi-tal responsibility for the eutrophication of lakes(ZhuJun et al.,2005),the remobilization of phosphorus insediments has a distinct influence on it as well(Bostr m et al.,1982).The concentrations of totalphosphorus(Ptotal)in the sediments are often related tothe trophic st…  相似文献   

论信息时代的城市发展     

金江军  潘懋  承继成 《国土资源信息化》2005,20(2):2-5,41

城市信息化是中国城市发展的新主题与新动力,是解决目前我国城市发展中诸多难题的重要途径。本文首先对比了数字城市和信息城市,然后指出了建设信息城市的迫切性和重要性,最后提出了城市信息科学的学科范畴。  相似文献   

基于GIS的城镇土地定级信息系统建模方法探讨   总被引：2，自引：0，他引：2  

刘艳中  汪新庆 《国土资源信息化》2005,19(3):37-40

基于GIS的城镇土地定级信息系统在建设过程中,定级方法确定、定级单元大小确定和定级因素/子权重值的生成是关键,且三者都具有不同的确定方法,因此选择什么样的方法决定了系统建立的优劣。本文着重归纳、总结了城镇土地定级信息系统定级方法,通过对比分析,探讨了最优定级方法、最优网格单元大小划分方法和最优因素/子权重值计算方法。  相似文献   

一种实现依比例街区自动合并的算法     

朱蕊  周滨  邰茜 《测绘学院学报》2005,22(1):58-61

针对依比例街区的图形特征，介绍了一种实现街区自动合并的有效算法，即利用数学形态学和模式识别对栅格数据进行追踪，然后提取街区轮廓线，编辑后就得到最终合并的街区。  相似文献   

基于广义Hough变换的不规则形状目标提取方法   总被引：1，自引：0，他引：1  

刘德刚余旭初  张鹏强 《测绘学院学报》2005,22(2):125-127

提出了一种基于广义Hough变换的不规则形状目标的提取方法。该方法主要包括目标参数描述和目标提取两部分。实验表明，该方法精度好、效率高。  相似文献