Shear Failure of a Clamped Dented Tubular Beam Under Lateral Impact   总被引：1，自引：0，他引：1  

Wang Deyu  Zhang Shanyuan Associate Prof.  Depart  of Naval Archi.  Ocean Engineering  Shanghai Jiaotong University  Shanghai Prof.  Research Institute of Applied Mechanics  Taiyuan University of Technology  Taiyuan 《中国海洋工程》1996,(2)

- The shear failure of a rigid-plastic dented clamped tubular beam under the lateral impact of a mass is investigated. Both the denting and the impact point are in the middle span of the beam. It is assumed that denting does not spread during the shear sliding. Numerical results show that the axial force and lateral deflection of the beam are very small at the moment of the occurence of shear failure, which means that the finite deformation effect can be neglected in the shear failure analysis. Also, some aspects of the initial impact energy are investigated.  相似文献   

Analysis of seabed instability using element free Galerkin method     

J.G. Wang  M.R. Karim  P.Z. Lin 《Ocean Engineering》2007,34(2):247-260

Wave-induced seabed instability, either momentary liquefaction or shear failure, is an important topic in ocean and coastal engineering. Many factors, such as seabed properties and wave parameters, affect the seabed instability. A non-dimensional parameter is proposed in this paper to evaluate the occurrence of momentary liquefaction. This parameter includes the properties of the soil and the wave. The determination of the wave-induced liquefaction depth is also suggested based on this non-dimensional parameter. As an example, a two-dimensional seabed with finite thickness is numerically treated with the EFGM meshless method developed early for wave-induced seabed responses. Parametric study is carried out to investigate the effect of wavelength, compressibility of pore fluid, permeability and stiffness of porous media, and variable stiffness with depth on the seabed response with three criteria for liquefaction. It is found that this non-dimensional parameter is a good index for identifying the momentary liquefaction qualitatively, and the criterion of liquefaction with seepage force can be used to predict the deepest liquefaction depth.  相似文献   

Non-Simultaneous Failure of Ice in Front of Multi-Leg Structures   总被引：4，自引：1，他引：4  

SHI  Qingzeng 《中国海洋工程》2002,16(2):183-192

Because the multi-leg jacket structure is the major type of offshore structures in the Bohai Sea, the study of non-si-multaneous failure of i鏴 on multi-leg structures is important. However, the non-simultaneous failure has not been consid-ered in engineering design until now, obviously resulting in costly design and notable waste. To resolve this problem, this paper, by means of analysis of experimental data, calculates the coefficient of the non-simultaneous failure for the double-pile structure, the square four-leg structure, the single-line multi-pile structure, and the conical structure, respectively, and provides some reference criteria for engineering design.  相似文献   

海冰板的环形屈曲的压缩破坏   总被引：2，自引：0，他引：2  

唐立强  陈会军等 《海洋工程》2001,19(4):29-33

在轴对称条件下，给出海冰板的环向屈曲面临载荷，从细观力学的观点分析了微裂纹开裂的条件，扩展方向并给出绕海洋平台柱腿冰的损伤区的尺度。所给出的临界半径是一个与冰材料力学特征，冰的微结构参数一海洋平台柱腿半径相关的特征参数。对现场所观察和测量的结构给出了解释和定量分析。  相似文献   

西藏崩错8级地震地表破裂的变形特征及其破裂机制   总被引：7，自引：2，他引：5       下载免费PDF全文

吴章明  邓起东 《地震地质》1989,11(1):15-25

1951年11月18日,西藏那曲崩错附近发生了一次8级地震,地表产生了长达约91公里的破裂带。本文总结了该破裂的几何、位移分布特征,讨论了破裂的形成机制和崩错地震的发震构造条件  相似文献   

黄山高速滑移弯曲边坡变形机理分析及应急治理对策     

巨能攀  赵建军  邓辉  黄润秋  段海澎 《地球科学进展》2008,23(5):474-481

黄山高速公路穿行于皖南山区,公路建设过程中,汤口互通A匝道高边坡产生了大范围变形,严重威胁已有构筑物和施工安全。为保证边坡稳定,成立“应急指挥小组”,建立快速反应机制,并采用工程地质测绘、勘探、监测等手段,快速查明边坡结构特征,分析边坡变形机理和稳定性,提出应急治理方案。分析表明,该边坡为层间软弱夹层[JP2]发育的砂泥岩互层型顺向边坡,地质历史上边坡曾发生滑移—弯曲变形,公路施工时对弯曲隆起部位岩体进行开挖,引起坡体产生快速变形,在降雨、开挖等条件下,边坡产生整体失稳的可能性极大。在分析边坡变形机制基础上,应用变形控制理论,确定对边坡采取桩锚结合、综合排水的应急治理措施,并根据变形特点提出了应急治理施工步骤。应急治理措施实施后,边坡变形得到了有效控制,稳定性达到了高速公路的安全要求  相似文献   

三峡库区高切坡致灾因素及防护对策——以重庆市万州区为例   总被引：1，自引：0，他引：1  

祝介旺  和海芳  柏松  伍法权 《中国地质灾害与防治学报》2008,19(2):7-11

三峡库区百万移民的搬迁建设导致大量高切坡的形成。未及时治理或治理不当的高切坡,不同程度地发生破坏,影响了人们的正常生活,甚至引发了地质灾害。因此,科学认识及治理高切坡十分必要。重庆市万州区高切坡主要有风化及差异风化、崩塌和土体滑塌等破坏形式。影响破坏的因素主要为工程地质条件、气候及时间效应。针对高切坡不同的破坏形式,以安全、经济及环境和谐的人文理念作为设计指导思想,充分论证了高切坡的防护方案,即：削坡、排水以及格构防护较适合万州区高切坡的防护。这些措施,既能很好地解决高切坡的防护问题,又能兼顾环保、降低造价。研究结果可以作为三峡地区高切坡类地质灾害防护设计的参考。也可为其它流域类似问题借鉴。  相似文献   

Bringing GPS into harsh environments for fully automated deformation monitoring     

Jason Bond  Adam Chrzanowski  Don Kim 《GPS Solutions》2008,12(1):1-11

Engineering projects that require deformation monitoring frequently utilize geodetic sensors to measure displacements of target points located in the deformation zone. In situations where control stations and targets are separated by a kilometer or more, GPS can offer higher precision position updates at more frequent intervals than can normally be achieved using total station technology. For large-scale deformation projects requiring the highest precision, it is therefore advisable to use a combination of the two sensors. In response to the need for high precision, continuous GPS position updates in harsh deformation monitoring environments, a software has been developed that employs triple-differenced carrier-phase measurements in a delayed-state Kalman filter. Two data sets were analyzed to test the capabilities of the software. In the first test, a GPS antenna was displaced using a translation stage to mimic slow deformation. In the second test, data collected at a large open pit mine were processed. It was shown that the delayed-state Kalman filter developed could detect millimeter-level displacements of a GPS antenna. The actual precision attained depends upon the amount of process noise infused at each epoch to accommodate the antenna displacements. Higher process noise values result in quicker detection times, but at the same time increase the noise in the solutions. A slow, 25 mm displacement was detected within 30 min of the full displacement with sigma values in E, N and U of ±10 mm or better. The same displacement could also be detected in less than 5 h with sigma values in E, N and U of ±5 mm or better. The software works best for detecting long period deformations (e.g., 20 mm per day or less) for which sigma values of 1–2 mm are attained in all three solution components. It was also shown that the triple-differenced carrier-phase observation can be used to significantly reduce the effects of residual tropospheric delay that would normally plague double-differenced observations in harsh GPS environments.

Don KimEmail:

  相似文献   

松散堆积体工程边坡变形机理分析及支护对策研究   总被引：1，自引：0，他引：1  

赵建军  巨能攀  涂国祥 《工程地质学报》2008,16(5):611-615

合理选择开挖坡比、正确认识变形破坏机理是影响松散堆积体边坡稳定性和施工安全的前提, 本文研究了西南地区某松散堆积体工程边坡的结构特征, 根据地形条件确定了合理的开挖坡比, 采用二维有限元研究了开挖边坡的变形机理并根据模拟结果确定潜在滑动面, 在此基础上, 提出支护对策。研究结果表明, 边坡由厚度达70m 的坡洪积、泥石流块碎石堆积体组成, 斜坡下部缓中部稍陡, 开挖平台位于缓坡部位, 根据地形条件结合坡体结构特征确定边坡开挖坡比为1: 0. 75; 数值模拟结果表明, 边坡变形开挖面附近及坡顶拉应力和坡体下部最大剪应力控制, 坡顶部位将首先产生拉张裂隙, 开挖边坡内部产生从坡脚部位向上发展的剪切变形, 滑面一旦与坡顶拉裂缝贯通, 边坡将产生整体失稳; 边坡采用锚拉桩、锚索框架、锚杆框架、排水相结合的综合治理措施进行支护。  相似文献   

软弱夹层几何参数对试样力学行为影响颗粒元模拟研究   总被引：2，自引：0，他引：2  

张晓平  吴顺川  张兵  潘文 《工程地质学报》2008,16(4):539-545

基于离散元理论的颗粒元程序,采用颗粒接触连接模型和滑动模型,建立了含软弱夹层试样的颗粒元模型。通过数值模型实验,对不同软弱夹层几何参数试样进行加载模拟,探讨了不同夹层厚度及不同倾角条件下试样的破坏过程和破坏形式,并分析其对试样强度的影响。模拟结果表明,裂隙首先产生于软弱夹层处,随着荷载的增加,再逐渐扩展,呈现渐进性破坏特征;夹层越厚,倾角越大,试样沿软弱夹层呈现较强的滑动特征,如果夹层薄且缓,软弱夹层成为试样破坏的非控制因素;软弱夹层厚度和夹角对试样的峰值强度都有影响,随软弱夹层厚度和夹角的增大,试样的峰值强度降低。  相似文献