浅析宁芜北段铜矿地质特征、找矿前景与方向   总被引：4，自引：0，他引：4       下载免费PDF全文

侯龙海 《江苏地质》2008,32(4):263-270

在综合分析区域地质背景、铜矿床基本特征、主要控矿因素、找矿标志的前提下,对该区寻找铜矿的前景提出了看法,指出宁芜北段今后寻找铜矿应侧重斑岩型铜矿,提出了皇姑山等地区可作为今后寻找铜矿的重点地段及今后找矿的工作建议。  相似文献   

四川省九龙县娃娃沟泥石流运动特征与堵河成灾机制分析     

施蕾蕾  陈宁生  杨成林 《中国地质灾害与防治学报》2008,19(2):16-22

2006年7月16日娃娃沟流域暴发的大规模泥石流,给下游3个电站造成巨大经济损失,是大渡河流域一次典型的灾害性泥石流。分析得出,娃娃沟泥石流重度高、搬运能力强,泥石流固体物质砂、石混杂,粗大砾石含量高;暴发频率低、规模大,流速及峰值流量分别高达10．78m／s及798．5m^3／s;在汇口处,泥石流堆积物堵塞河道是引起下游电站受灾的重要原因,高重度、粗颗粒、大流量的组合是此次泥石流堵江的重要原因。堵河判别计算结果显示在发生百年一遇泥石流时,该断面均有发生堵河的可能。娃娃沟泥石流表明：①在大渡河支流的泥石流沟周边的中小电站极有可能在泥石流暴发时受到破坏。因此,电站建设过程中应加强对周边泥石流沟的防灾减灾工作;②虽然娃娃沟流域植被良好,但仍然发生了大规模泥石流。表明植被不能完全避免泥石流的发生,对于此类泥石流沟不能疏忽大意。  相似文献   

福建戴云山隧道断层性质与稳定性研究     

余成伟  刘星 《云南地质》2008,27(4):509-513

隧道断层（F2）为张性正断层,破坏原岩中较为对称的应力平衡,加之带内岩石破碎,节理裂隙发育,使得断层更加容易坍塌和涌水。建议采用稳定掌子面法和专门支护保证硐室稳定。  相似文献   

中缓倾角结构面分类及其抗剪强度的研究     

吴琦  黄润秋  林锋  裴钻 《工程地质学报》2008,16(1):42-46

西南某坝区中缓倾角结构面具有分别倾向上游和下游的空间分布规律。根据结构面接触情况,首先将结构面分为刚性结构面和软弱结构面两大类。其中,刚性结构面属于裂隙型;软弱结构面根据其物质组成和结构特征,可以细分为岩块岩屑型、岩屑夹泥型、泥夹岩屑型3个亚类。断层类结构面具有垂直于断层走向,由高高程到低高程,由泥夹岩屑型岩屑夹泥型岩屑砾型裂隙型逐渐过渡的发育规律。最后在分析抗剪试验资料和分类及发育规律的基础上,提出了抗剪强度指标的建议值。  相似文献   

斜坡非饱和带低渗透岩石结构体风化前锋扩展过程   总被引：2，自引：0，他引：2  

徐则民 《地学前缘》2008,15(4):258-268

非饱和带低渗透岩石结构体风化前锋扩展是斜坡灾害孕育过程中的关键环节之一。到目前为止,化学风化领域的研究成果主要集中在高水-岩比的饱和环境下单矿物及矿物成分单一的碳酸盐岩的风化动力学方面,非饱和环境下的岩石风化研究还主要限于风化产物的特性描述方面。斜坡非饱和带低渗透岩石结构体风化前锋扩展是一种高度复杂的THMC过程。由于在溶解对象、溶解液及溶解过程的水动力-水化学环境等方面存在的显著差异,既有的地质材料风化动力学成果为探索这一复杂过程提供了理论储备,但还不能阐明其核心机理。斜坡非饱和带低渗透岩石结构体风化前锋的扩展过程研究不仅可以加深人们对斜坡灾害孕育的理解,为灾害预报-预警及其控制提供理论依据,同时可以促进岩石-岩体力学及浅表生水文地球化学等相关学科的交叉与发展。  相似文献   

郑州市城区深部基岩层热储特征分析     

刘传权  郭克剑 《华南地质与矿产》2008,(2):58-61

通过对郑州市城区深部基岩层热储的岩性、构造、热源及盖层条件分析研究,总结了该区热储特征,并首次提出了断裂循环型带状热储构造网络体系的构思,这对该区今后深部基岩层热储的研究具有一定的参考意义。  相似文献   

大别山的变质碰撞混杂岩——以东部为例     

徐树桐  吴维平  刘贻灿  王华明 《地质力学学报》2008,14(1):1-21

大别山是中国东部中朝大陆板块与扬子大陆板块之间的碰撞造山带。具有薄皮构造的性质。组成两个碰撞大陆之间的滑脱（冲断剪切）带的岩石就是碰撞混杂岩组合。大别山由于剥露较深,仰冲壳楔完全被剥蚀,超高压变质带大面积出露,识别出碰撞混杂岩组合是对大别山进行几何分析的必要步骤。大别山碰撞混杂岩组合可分为南北两部分。北部为条带状片麻岩-超镁铁岩组合,南部为云母斜长片麻岩-榴辉岩组合,这两个组合的大部分都经历过超高压变质作用。它们的共同特点是具有宏观的＂碎斑结构＂和混杂作用。罗田穹隆是造山过程中早期形成的双冲式背斜,最后在造山晚期因东西向缩短的叠加而形成穹隆。  相似文献   

准噶尔盆地西北缘克-百地区不整合面及其动力学条件   总被引：3，自引：1，他引：2  

陈书平  况军  刘继山  屈冬萌  孙萌思  郭文建 《高校地质学报》2008,14(2)

不整合及其性质和强度的确定对理解克拉玛依至百口泉地区构造变形历史和油气聚集规律具有重要意义。根据地震资料研究显示,该区二叠纪至中生代地层中存在多个不整合面,且多为构造运动的反映。其中对克-百地区构造形成具有重要影响的有四期,其一发生在中二叠统下乌尔禾组沉积后,主要表现为冲断掀斜运动,使其前的二叠纪沉积向南东方向掀斜抬升,遭受剥蚀;其二发生在三叠纪末期,对克百断裂上盘大侏罗沟断层至百口泉段的构造有重要影响;其三发生在中侏罗世末,该期构造运动在克百断裂带及其上盘表现最为清楚,以冲断为主,局部地区有褶皱现象;其四发生在早白垩世末期,表现为掀斜运动,褶皱和断裂作用相对较弱。克-百地区不同时期、不同构造部位变形的差异性与构造动力条件密切相关。  相似文献   

High-resolution seismic analysis of the coastal Mecklenburg Bay (North German Basin): the pre-Alpine evolution     

H. Zöllner  K. Reicherter  P. Schikowsky 《International Journal of Earth Sciences》2008,97(5):1013-1027

The pre-Alpine structural and geological evolution in the northern part of the North German Basin have been revealed on the basis of a very dense reflection seismic profile grid. The study area is situated in the coastal Mecklenburg Bay (Germany), part of the southwestern Baltic Sea. From the central part of the North German Basin to the northern basin margin in the Grimmen High area a series of high-resolution maps show the evolution from the base Zechstein to the Lower Jurassic. We present a map of basement faults affecting the pre-Zechstein. The pre-Alpine structural evolution of the region has been determined from digital mapping of post-Permian key horizons traced on the processed seismic time sections. The geological evolution of the North German Basin can be separated into four distinct periods in the Rerik study area. During Late Permian and Early Triassic evaporites and clastics were deposited. Salt movement was initiated after the deposition of the Middle Triassic Muschelkalk. Salt pillows, which were previously unmapped in the study area, are responsible for the creation of smaller subsidence centers and angular unconformities in the Late Triassic Keuper, especially in the vicinity of the fault-bounded Grimmen High. In this area, partly Lower Jurassic sediments overlie the Keuper unconformably. The change from extension to compression in the regional stress field remobilized the salt, leading to a major unconformity marked at the base of the Late Cretaceous.  相似文献   

Tectonics of the Simplon massif and Lepontine gneiss dome: deformation structures due to collision between the underthrusting European plate and the Adriatic indenter   总被引：1，自引：0，他引：1  

Albrecht Steck 《Swiss Journal of Geoscience》2008,101(2):515-546

This study presents a review of published geological data, combined with original observations on the tectonics of the Simplon massif and the Lepontine gneiss dome in the Western Alps. New observations concern the geometry of the Oligocene Vanzone back fold, formed under amphibolite facies conditions, and of its root between Domodossola and Locarno, which is cut at an acute angle by the Miocene, epi- to anchizonal, dextral Centovalli strike-slip fault. The structures of the Simplon massif result from collision over 50 Ma between two plate boundaries with a different geometry: the underthrusted European plate and the Adriatic indenter. Detailed mapping and analysis of a complex structural interference pattern, combined with observations on the metamorphic grade of the superimposed structures and radiometric data, allow a kinematic model to be developed for this zone of oblique continental collision. The following main Alpine tectonic phases and structures may be distinguished:

1.	NW-directed nappe emplacement, starting in the Early Eocene (~50 Ma);
2.	W, SW and S-verging transverse folds;
3.	transpressional movements on the dextral Simplon ductile shear zone since ~32 Ma;
4.	formation of the Bergell – Vanzone backfolds and of the southern steep belt during the Oligocene, emplacement of the mantle derived 31–29 Ma Bergell and Biella granodiorites and porphyritic andesites as well as intrusions of 29–25 Ma crustal aplites and pegmatites;
5.	formation of the dextral discrete Rhone-Simplon line and the Centovalli line during the Miocene, accompanied by the pull-apart development of the Lepontine gneiss dome – Dent Blanche (Valpelline) depression.

It is suggested that movements of shortening in fan shaped NW, W and SW directions accompanied the more regular NW- to WNW-directed displacement of the Adriatic indenter during continental collision.

---

Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users. Editorial Handling: Stefan Bucher  相似文献