“醉汉林”作为滑坡和边坡变形特征标志的意义——以陕西陇县地区为例     

李东林吴树仁  张春山刘鑫 《地质通报》2007,26(5):613-619

“醉汉林”一般被当做滑坡存在的一种标志。在陕西宝鸡地区进行地质灾害详细调查的过程中,发现变形边坡也有“醉汉林”分布。对陕西陇县郭家庄变形边坡“醉汉林”的树木倾斜角与边坡的倾角进行了测量,并结合几何学分析,认为树木倾斜角反映了边坡倾角的变化,并得出边坡倾角不断变陡是该地区边坡变形的一种主要方式的结论。研究结果表明,“醉汉林”有着多样而具体的指示意义:“醉汉林”记录了边坡变形的历史,可以作为区分滑坡与变形边坡的标志,“醉汉林”可以指示滑坡及边坡的状态,还可以判断滑坡剪出口是否存在。  相似文献   

改进的光谱角制图沿照度方向分类法及其应用——以ETM数据为例     

王涛  刘少峰  杨金中  詹华明  张安定 《遥感学报》2007,11(1):77-84

选取多光谱遥感数据（ETM）对新疆北山西段中坡山笔架山一带进行了遥感蚀变信息提取方法研究。根据光谱角制图信息增强方法的优缺点,通过对光谱照度的研究,提出了结合光谱角分类方法进行沿光谱照度方向距离分类的信息提取方法。实验表明,该方法应用于ETM数据,增强了目标信息,同时剔除掉因照度所产生的大量非目标信息,为优化信息提供了一种有效的方法。在地形比较平坦的研究区取得了很好的应用效果。  相似文献   

Influence of surface roughness of dune bedforms on flow and turbulence characteristics     

《国际泥沙研究》2020,35(6):666-678

The current paper investigates the flow and turbulence characteristics over dune bedforms by means of laboratory experiments, where spatially dense and temporally high frequency velocity measurements were done. Although similar studies are available in the literature, the focus and novelty of the current study is to assess the influence of surface roughness of the dune bedforms on the nearbed flow. For direct comparison, two different surface roughness heights over idealized, fixed-shaped, high-angled dune bedforms were tested; one with a hydraulically-smooth surface, and the other with a fully-rough surface. Spatial variation of time-averaged flow as well as turbulence statistics were examined, which was complemented by streamline plots and spectral analyses. The results are interpreted from sediment entrainment and sediment transport points of view. The results show that increased dune surface roughness reduces the nearbed flow velocity, but increases the flow velocities at upper regions. The upward directed flow near the dune crests becomes stronger in the case of smooth surface, while the re-attachment point moves further downstream compared to the rough wall case. It is concluded that the roughness of the dune surface affects the nearbed flow and turbulence characteristics qualitatively and quantitatively, which is shown to have direct consequences on sediment entrainment characteristics.  相似文献   

Influence of diversion angle on water and sediment flow into diversion channel     

《国际泥沙研究》2020,35(6):600-608

Accumulation of the sediment in the stream of the diversion channels adversely affects its operational systems. Diversion channels are often constructed perpendicular to the main river. In this study, the water flow and sediment transport in the diversion channel with different angles were investigated in an attempt to maximize water discharge and minimize sediment discharge. A physical model with movable bed was used to simulate water and sediment flow with five diversion angles (θ) between (30°–90°). Moreover, three bed width ratios (B_r) (the relation between diversion to main channel bed width) between 30% and 50% and five total discharges between (7.25 L/s to 12.25 L/s) were considered for each case of (θ). The results showed, up to 10%, increasing in proportion discharge ratios for 30 and 45 diversion angles compared with 90° diversion angle. The results also showed that the lowest diversion sediment concentration was provided by the (θ) of 30°. Across all scenarios, the average proportion concentration reduction was 64%, compared with 90° diversion angle. Closer observation of the diversion system mechanism confirmed that decreased (θ) result in decreased sediment concentrations in the diversion channels. In conclusion, the diversion channel water and sediment discharge could be effectively managed by changing the (θ) to 30° or 45° instead of 90°.  相似文献   

穿过张家口—渤海地震带西缘的折射剖面所揭示的地壳上地幔构造与速度结构   总被引：6，自引：0，他引：6  

聂文英  祝治平  张先康  张成科  盖玉杰  张建狮 《地震研究》1998,(1)

近期完成的北北东向的繁峙～太仆寺旗宽角反射／折射剖面,由山西断隆进入内蒙地轴,它穿过了山西地震带的大同～阳高震区和北西西向张家口～渤海地震带的西北缘。其主要目的是探测研究张～渤地震带及其两侧壳幔构造与速度结构的差异及其与地震活动的相关性。结果表明：张～渤地震带壳内界面及莫霍面较其两侧有１．０～２．０ｋｍ的不同程度的上隆;在阳原～张家口之间地壳结构纵向与横向非均匀性明显,上地壳和下地壳上部有局部的速度逆转,下地壳下部的低速层由山西断隆一直延伸至内蒙地轴,上地幔顶部的速度梯度明显增大;在阳原、怀安和张北附近分别存在着延伸至莫霍面的地壳深断裂带;在内蒙地轴一系列壳内界面不明显。  相似文献   

Mineralogy and physical nature of clay gouge     

Francis T. Wu 《Pure and Applied Geophysics》1978,116(4-5):655-689

Fault gouges have been observed in the surface outcrops, in shallow excavations, and in deep (300 meters below the surface) tunnels and mines in fault zones. The 2-microns fractions in these fault gouges may compose a few percent to more than fifty percent of the total mass in the outcrops, and the mineralogy of the 2-microns fractions consists of a variety of clays (the common ones are montmorillonite, illite, kaolinite, chlorite, vermiculite and mixed-layer clays) and some quartz, feldspars, etc.Although we cannot yet conclude directly from the studies of gouges that similar gouges exist at depths where many large shallow earthquakes are generated, there is a strong possibility that they do, based on (1) available equilibrium data on various clays — for example, kaolinite has been found to exist at 4 kb and 375°C (±15°C) (Thompson, 1970) and montmorillonite + kaolite has been found to exist at 450°C and 4 kb (Velde, 1969); (2) the compatibility of laboratory velocity data in gouge (Wang et al., 1977) with those in a model for central California (Healy andPeake, 1975); (3) the capability of clays to undergo sudden earthquake-like displacements (Summers andByerlee, 1977); (4) the petrology of intrafault cataclastic rocks in old fault zones (Kasza, 1977); and (5) the compatibility of gouge mineralogy with the mineralogy of hydrothermal clay deposits.If clay gouges are indeed significant components of the fault zone at depth, then the mechanical properties of clays under confining pressures up to 4 kb are important in the behavior of faults. Very few experiments have been performed under such high pressures. But from the physical makeup of clays, we can infer that (1) the range of possible behavior includes stable sliding with vermiculite and montmorillonite (asByerlee andSummers, 1977, have proven) to stick-slip-like behavior with kaolinite, chlorite, etc.; (2) the absence or presence of water will greatly affect the strengths of gouges — it is possible that water may reduce the strength of gouge to a fairly small value.  相似文献   

裂纹间动态相互作用的实验观测与理论分析──以共线剪切裂纹归并为例   总被引：8，自引：0，他引：8       下载免费PDF全文

李世愚  滕春凯 《地球物理学报》1998,41(1):79-89

本文以共线剪切裂纹的归并为例,研究裂纹系的动态相互作用．实验结果表明：在张破裂的意义上,小间距共线剪切裂纹的内端部实际上是阻碍结构,通过迂回弯曲的张破裂归并．本文提出一种估计张破裂扩展途径的近似方法,利用张应力破裂判据找出了潜在的破裂扩展途径的第一近似,较好地模拟了共线裂纹的破裂途径,和现有的数值模拟方法比较,可以大大缩短机时,简化计算程序,保证精确度．本研究结出了岩石剪切破裂“隧道效应”（即破裂跳过障碍体,而障碍体本身不破坏）的机理,还给出了脆性介质在摩擦、磨损过程中碎屑产生的机理．  相似文献   

双曲面模型深海三维定位数据模拟及精度分析          下载免费PDF全文

朱祥娥  蔡艳辉  王权 《海洋测绘》2008,28(6):6-9

结合声波射线传播规律提出了双曲面模型水声定位的数据模拟方法。利用该方法模拟一定浮标网形下声源位于某区域约2 000m水深处10km×10km范围内的声线双曲面模型定位观测数据,进行定位解算,并将截止角的概念引入水声定位中。定位结果显示,大部分区域水下DGPS定位系统的外符合定位精度在水平方向优于5m,垂直方向优于10m;网形中间区域精度较高,三维定位精度为亚米级。引入角度限制后,定位区域内外符合定位精度水平方向优于1m,垂直方向优于4m。  相似文献   

船舶监控系统中航迹线动态绘制算法应用研究     

张峰  李四海  刘金 《海洋测绘》2008,28(3):68-71

在船舶监控系统中应用3S技术，实现了船只航迹线的动态绘制，系统能够根据船只航行方向动态显示航行轨迹，程序开发过程中涉及到偏转角度算法和距离插值两个核心算法。实践表明，这两个算法的合理应用，在航迹线可视化表现方面取得了良好的效果。  相似文献   

Evaluating the stress intensity factors of anisotropic bimaterials using boundary element method     

Chao‐Shi Chen  Chien‐Chung Ke  Chia‐Huei Tu 《国际地质力学数值与分析法杂志》2008,32(11):1341-1364

This paper presents a boundary element method (BEM) procedure for a linear elastic fracture mechanics analysis in two‐dimensional anisotropic bimaterials. In this formulation, a displacement integral equation is only collocated on the uncracked boundary, and a traction integral equation is only collocated on one side of the crack surface. A fundamental solution (Green's function) for anisotropic bimaterials is also derived and implemented into the boundary integral formulation so that except for the interfacial crack part, the discretization along the interface can be avoided. A special crack‐tip element is introduced to capture the exact crack‐tip behavior. A computer program using FORTRAN has been developed to effectively calculate the stress intensity factors of an anisotropic bimaterial. This BEM program has been verified to have a good accuracy with previous studies. In addition, a central cracked bimaterial Brazilian specimen constituting cement and gypsum is prepared to conduct the Brazilian test under diametral loading. The result shows that the numerical analysis can predict relatively well the direction of crack initiation and the path of crack propagation. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献