洪山预测区煤层赋存的可能性分析     

尚洪田 《中国煤田地质》2006,18(4):25-26,52

分析了洪山预测区西部洪山岩体地质特征及其向外围扩散的范围和程度，研究了北掌勘查区和焦窑煤矿两邻区煤层受岩浆岩影响的程度，认为洪山岩体对预测区煤系及煤层赋存的影响较小，岩体外围仍有煤系赋存。为下一步找煤指明了方向。  相似文献   

Avalanche Risk During Backcountry Skiing – An Analysis of Risk Factors     

Harpa Grímsdóttir  David Mcclung 《Natural Hazards》2006,39(1):127-153

Skier-triggered avalanches are the main cause of avalanche accidents in backcountry skiing. The risk of accidents during backcountry skiing was analysed statistically and related to factors such as elevation level, aspect, stability rating and the time of the year. The analysis is based on a database about terrain usage and avalanche accidents from a large heli-skiing operator in Canada, which makes it possible to study the conditional probability of accidents given the recorded pattern of terrain usage. This study shows that the historical risk of accidentally triggering an avalanche greater than size 1 depends highly on the stability rating, with the highest risk occurring during “poor” stability. The risk is greater at high elevations, and it is lower during the late season than earlier on. Skier risk does not depend as much on aspect as may be indicated from avalanche data alone. However, it is relatively high in the N–NE–E sector. These factors are not independent of each other and therefore analyses of combined factors were also performed. Questionnaires and interviews were used to gain knowledge about the terrain selection of professional mountain guides. These results indicate that when selecting terrain, guides first look at the overall shape and size of the terrain, but avalanche history of terrain and inclination are also important factors. Finally, remarks in avalanche reports were analysed, and common human factors identified.  相似文献   

CCSD主孔1113~1600 m花岗质片麻岩单元的变形构造特征   总被引：3，自引：0，他引：3       下载免费PDF全文

唐哲民柴耀楚  陈世忠陈方远 《中国地质》2005,32(2):265-275

中国大陆科学钻探(CCSD)主孔2000m岩性剖面揭示了1113～1600m花岗质片麻岩段为地表北苏鲁超高压花岗质变质岩剪切构造叠覆岩片中的石湖镇构造岩片的花岗质片麻岩的下延部分。本单元之上下界线为韧性剪切带,内部发育小型韧性剪切变形,仅局部可见旋转碎斑体系等剪切指向标志,以SE向NW的逆冲剪切指向为主,其次为NW向SE的正滑剪切指向,并主要发育于较软弱夹层内,后者成为苏鲁地区存在伸展型穹隆构造的新证据;在1140～1280m岩性段内发育断续、较弱的拉伸线理,拉伸线理总体向SE倾伏,倾伏角为10～36°;花岗质片麻岩单元内部分石英以多晶石英条带的形式存在,花岗质片麻岩主要矿物长石基本没有动态重结晶现象,仅具较弱的形态拉长特征(X∶Z=2左右),总体面理倾向170°E,倾角平均20°,明显不同于其他岩性单元内的面理产状,可能主要代表折返变形之前的近东西向构造,而其他岩性单元受折返变形影响较大,其面理产状主要代表折返阶段形成的NE-NNE向构造;运用电子背散射(EBSD)技术进行石英组构分析并与费氏台测定对比,表明1113～1600m花岗质片麻岩单元经历了中—低温变形,局部残留有高温组构,剪切指向主要为SE向NW的逆冲,其中高温组构与中温组构均显示为SE向NW的逆冲剪切指向,反映折返早期与折返主期岩片的相对剪切方向一  相似文献   

湖北省巴东县黄土坡滑坡深部变形防治方案探讨   总被引：1，自引：0，他引：1  

江鸿彬 《中国地质灾害与防治学报》2005,16(1):53-56,60

文章根据几年来从事黄土坡滑坡区的勘查、可研及现场工程管理的认识，从滑坡分布特征、物质构成、稳定研究、变形特征等方面对滑坡进行研究。针对该滑坡厚度巨大，滑体强度高，近期深部变形较明显的实情，作者以库仑定律为基础，提出采用岩土加固治理滑坡区深部滑移的初步治理方案。  相似文献   

河南焦作云台山早前寒武纪变质基底锆石SHRIMP U-Pb年龄   总被引：4，自引：0，他引：4  

高林志  赵汀  万渝生  赵逊  马寅生  杨守政 《地质通报》2005,24(12):1089-1093

应用离子探针技术,对华北太行山南缘钾长石化长英质副片麻岩和钾长石化片麻状奥长花岗岩进行了锆石年龄测定。钾长石化长英质副片麻岩的变质原岩为泥砂质碎屑沉积岩,其形成时代很可能为新太古代。碎屑锆石普遍存在强烈铅丢失,靠近上交点的5个数据点207Pb/206Pb加权平均年龄为3399Ma±8Ma,代表了物源区组成的时代。钾长石化片麻状奥长花岗岩2组锆石207Pb/206Pb加权平均年龄分别为2511Ma±13Ma(岩体形成时代)和2735Ma±16Ma(残余锆石年龄),分别代表该岩体形成时代和残余锆石年龄。新的资料支持了华北克拉通中部造山带太古宙地质体与其东部陆块存在亲缘关系的认识。  相似文献   

引黄水在北大港水库蓄存期水质咸化的研究   总被引：10，自引：0，他引：10       下载免费PDF全文

赵文玉  王启山  吴国平  吴立波  孙增峰  郑力燕 《水科学进展》2005,16(6):763-766

依据引黄水在北大港水库蓄存期水质咸化的事实以及传质理论,定性地分析了引黄水水质咸化的主要原因,包括盐碱土传质作用、蒸发浓缩作用以及风的扰动加速传质作用等.在北大港水库旁修建了一个模拟试验水池,进行了现场模拟试验研究.依据水量平衡和氯离子总量平衡的原理,分别定量地计算了传质作用和蒸发浓缩作用对水质咸化影响的比重.结果表明,在模拟水池蓄水后的30 d内,传质作用对水质咸化影响的比重有随时间增加而增长的趋势;30 d后,传质作用对水质咸化影响的比重稳定在80%,蒸发浓缩作用对水质咸化影响的比重稳定在20%,说明导致水质咸化的最主要因素是盐碱土传质作用.  相似文献   

旋转流地转适应过程与能量转换规律     

Fang Juan  Wu Rongsheng 《大气科学进展》2002,19(5):845-854

利用一维线性浅水模式从一个比较普遍的角度对地转适应过程中能量转换的特点进行分析。中首先考虑了两类不同的初始不平衡流的适应问题。一个是Gill所采用的质量不平衡模型，即初始场是静止的，只有水面扰动；另一个是Rossby中所考虑的动量不平衡模型，其初始不平衡流中只有风场的扰动，对这两个模型的适应过程而言，一个显的 特点就是能量转换率始终不会大于1／2或小于0，即适应过程中有位（动）能的释放和向动（位）能的转换，但释放出的能量最多只有其中的一半可以保留在最后的平衡场中。另外，本对任意初始不平衡流适应过程中的能量学特征也进行了分析，指出对于偏差场（相对于一定基本态）的动能和位能而言，上述能量转换关系依然成立。  相似文献   

柯树背岩体的元素地球化学特征及其成矿意义   总被引：1，自引：0，他引：1  

胡恭任  陈培荣等 《地质与勘探》2002,38(6):25-29

对柯树背岩体的岩石化学，稀土元素，微量元素及铀金成矿元素进行了系统的研究。研究结果表明：柯树背岩体F9大断裂（鹰潭－安远深大断裂）以东部分（东体）与F9大断裂以西部分（西体）在稀土分布模式，微量元素，铀金成矿元素及矿化特征上存在很大的差别，东体与寨背岩体类似，为同熔系列花岗岩，对铀成矿不利；西体为重熔再生岩浆成因的改造型花岗岩，对铀成矿有利，具有良好的成矿远景。  相似文献   

基于土体中结构面的岩土工程问题探讨   总被引：10，自引：2，他引：10  

蒋建平  章杨松  罗国煜 《工程地质学报》2002,10(2):160-165

土体中也存在结构面，并且结构面的存在与很多的岩土问题有关。为使土体中的结构面受到足够的重视，本文就其中的几个主要岩土工程问题进行了探讨，它们是：结构面对土体力学性质的影响、土体结构面对土体破坏的控制作用、有时可尝试用离散元等模型分析土体变形、土体中结构面上水的渗流和污染物的运移、结构面上土体力学参数问题、土坡稳定性问题、土与结构物的相互作用问题、土体中结构面与环境岩土工程问题等。  相似文献   

Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures     

A. S. Ahlawat  A. Ramaswamy 《地震工程与结构动力学》2002,31(7):1459-1479

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献