西部煤炭采区三维地震勘探技术与效果   总被引：1，自引：0，他引：1  

吴有信 《物探与化探》2005,29(5):404-408

阐述了西部地区煤炭三维地震勘探地质和地球物理特征, 对三维地震勘探的观测系统设计、地震波的激发与接收条件选择、施工技术措施等进行了讨论, 通过几个地区的地震勘探数据采集实践, 说明在西部地区复杂的地形地质和地震地质条件下, 煤炭三维地震勘探同样可取得较好的地质效果。  相似文献   

利用Java-X3D实现地震层位三维可视化   总被引：1，自引：0，他引：1  

钱荣毅  唐科学 《物探与化探》2005,29(6):561-564

地震层位三维可视化可以提供形象化的地震层位三维特征,便于地震资料的后期解释.在叙述地震层位三维可视化技术原理、目标、方法的基础上,尝试利用Java-X3D技术实现地震层位三维可视化,并利用实际坐标数据,实现了在Internet上跨平台的地震层位及地质构造三维可视化模拟,取得了良好的效果.  相似文献   

C1相干算法及其在三维地震资料处理解释中的应用     

丛茂祥  李洪亮 《中国煤田地质》2005,17(2):49-50,70

C1相干算法是计算每道的横测线和相邻纵测线的互相关，依据相干值来判断地层和岩性的横向不均匀性。根据互相关原理，提出了相干体算法中二维和三维C1算法的内容及其具体实现。通过对实际三维地震资料的处理，结合已知地质资料，证明C1相干技术在三维地震资料的断层解释方面有着明显的效果。  相似文献   

禹州煤田泉店井田构造特征及对其二1煤层的影响     

张云中姜敏德  李惠杰田张丽 《中国煤田地质》2005,17(5):8-10

对泉店井田的地质构造进行了分析研究,阐明了断层及褶曲的分布,探讨了井田的构造演化,分析了构造特别是断层对二1煤层的影响,为今后煤矿开发生产提供了可靠的地质依据.  相似文献   

煤矿采区三维地震资料解释中的切片技术及其应用   总被引：3，自引：1，他引：3  

吴有信 《中国煤田地质》2005,17(5):94-97

长期以来,煤矿采区三维地震勘探资料解释的工作流程与二维地震勘探基本相同,三维地震资料相对二维地震资料所具有的许多解释方面的优越性未能有效发挥出来,人机联作的过程相对简单.在三维地震勘探获取的三维数据体基础上,可做进一步的运算和分析,提取速度、振幅、频率、相位等相关信息,并利用等时切片、层拉平切片、断层切片、面块切片、方差体、相干体等各种技术,有效解释小构造、小褶曲及岩性方面的信息.  相似文献   

模式水平分辨率对祁连山区降水模拟影响的初步分析   总被引：5，自引：3，他引：5  

李锁锁  吕世华  高艳红  张宇 《高原气象》2005,24(4):496-502

利用中尺度模式MM5V3．6，针对祁连山地区2002年7月14～17日的一次降水过程，设计了一组不同水平分辨率的试验进行数值模拟。并将模式结果与实测资料进行对比，结果表明：高水平分辨率对降水中心位置的模拟较好，但同时会产生虚假降水中心，且模拟的降水中心量值一般都大于实测值。而低水平分辨率对降水量值的模拟较好，但对降水中心位置的模拟没有高水平分辨率的好。  相似文献   

抽水引起的含水层水平应变──地裂缝活动新机理   总被引：13，自引：0，他引：13  

王庆良  刘玉海  陈志新  王文萍 《工程地质学报》2002,10(1):46-50

基于Darcy -Gersevanov广义渗流关系式 ,本文首先导出了单井定流量抽水引起的泰斯承压含水层水平运动和应变解析表达式 ,并据此提出了抽水诱发地裂缝活动的含水层水平应变新机理 ,其主要观点为 :受井栅的约束阻挡作用 ,抽水活动将在含水层内部形成近井径向挤压区和远井径向拉张区两个应变区域 ,随着抽水时间的增长 ,近井径向挤压区将逐渐向外扩展 ;当地裂缝及其下伏断层或裂隙位于抽水活动引起的径向拉张应变区域时 ,地裂缝将出现加速活动 ;反之 ,当地裂缝处于抽水活动引起的径向挤压应变区域时 ,地裂缝活动反而受到抑制。上述地裂缝活动机理通过大同机车工厂现场抽水实验得到了初步证实。  相似文献   

A mathematical hysteretic model for elastomeric isolation bearings     

J. S. Hwang  J. D. Wu  T.‐C. Pan  G. Yang 《地震工程与结构动力学》2002,31(4):771-789

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Comparative response analysis of conventional and innovative seismic protection strategies     

S. Bruno  C. Valente 《地震工程与结构动力学》2002,31(5):1067-1092

The paper presents a numerical investigation aimed at evaluating the improvements achievable through devices for passive seismic protection of buildings based on the use of shape memory alloys (SMA) in place of conventional steel or rubber devices. To get some generality in the results, different resisting reinforced concrete plane frames were analysed, either protected or not. ‘New’ and ‘existing’ buildings were considered depending on whether seismic provisions are adopted in the building design or not. Base isolation and energy dissipation were equally addressed for both conventional and innovative SMA‐based devices. Fragility analyses were performed using specific damage measures to account for comparisons among different damage types; the results were then used to estimate quantitatively the effectiveness of the various protection systems. More specifically, the assessment involved a direct comparison of the damage reduction provided by each protection system with respect to the severe degradation experienced by the corresponding non‐protected frame. Structural damage, non‐structural damage and damage to contents were used on purpose and included in a subsequent phase of cost analysis to evaluate the expected gains also in terms of economic benefits and life loss prevention. The results indicate that base isolation, when applicable, provides higher degrees of safety than energy dissipation does; moreover, the use of SMA‐based devices generally brings about better performances, also in consideration of the reduced functional and maintenance requirements. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Seismic response of self‐centring hysteretic SDOF systems     

Constantin Christopoulos  Andr Filiatrault  Bryan Folz 《地震工程与结构动力学》2002,31(5):1131-1150

The seismic response of single‐degree‐of‐freedom (SDOF) systems incorporating flag‐shaped hysteretic structural behaviour, with self‐centring capability, is investigated numerically. For a SDOF system with a given initial period and strength level, the flag‐shaped hysteretic behaviour is fully defined by a post‐yielding stiffness parameter and an energy‐dissipation parameter. A comprehensive parametric study was conducted to determine the influence of these parameters on SDOF structural response, in terms of displacement ductility, absolute acceleration and absorbed energy. This parametric study was conducted using an ensemble of 20 historical earthquake records corresponding to ordinary ground motions having a probability of exceedence of 10% in 50 years, in California. The responses of the flag‐shaped hysteretic SDOF systems are compared against the responses of similar bilinear elasto‐plastic hysteretic SDOF systems. In this study the elasto‐plastic hysteretic SDOF systems are assigned parameters representative of steel moment resisting frames (MRFs) with post‐Northridge welded beam‐to‐column connections. In turn, the flag‐shaped hysteretic SDOF systems are representative of steel MRFs with newly proposed post‐tensioned energy‐dissipating connections. Building structures with initial periods ranging from 0.1 to 2.0s and having various strength levels are considered. It is shown that a flag‐shaped hysteretic SDOF system of equal or lesser strength can always be found to match or better the response of an elasto‐plastic hysteretic SDOF system in terms of displacement ductility and without incurring any residual drift from the seismic event. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献