Seismic lamination and anisotropy of the Lower Continental Crust   总被引：2，自引：3，他引：2  

Rolf Meissner  Wolfgang Rabbel  Hartmut Kern 《Tectonophysics》2006,416(1-4):81

Seismic lamination in the lower crust associated with marked anisotropy has been observed at various locations. Three of these locations were investigated by specially designed experiments in the near vertical and in the wide-angle range, that is the Urach and the Black Forrest area, both belonging to the Moldanubian, a collapsed Variscan terrane in southern Germany, and in the Donbas Basin, a rift inside the East European (Ukrainian) craton. In these three cases, a firm relationship between lower crust seismic lamination and anisotropy is found. There are more cases of lower-crustal lamination and anisotropy, e.g. from the Basin and Range province (western US) and from central Tibet, not revealed by seismic wide-angle measurements, but by teleseismic receiver function studies with a P–S conversion at the Moho. Other cases of lamination and anisotropy are from exhumed lower crustal rocks in Calabria (southern Italy), and Val Sesia and Val Strona (Ivrea area, Northern Italy). We demonstrate that rocks in the lower continental crust, apart from differing in composition, differ from the upper mantle both in terms of seismic lamination (observed in the near-vertical range) and in the type of anisotropy. Compared to upper mantle rocks exhibiting mainly orthorhombic symmetry, the symmetry of the rocks constituting the lower crust is either axial or orthorhombic and basically a result of preferred crystallographic orientation of major minerals (biotite, muscovite, hornblende). We argue that the generation of seismic lamination and anisotropy in the lower crust is a consequence of the same tectonic process, that is, ductile deformation in a warm and low-viscosity lower crust. This process takes place preferably in areas of extension. Heterogeneous rock units are formed that are generally felsic in composition, but that contain intercalations of mafic intrusions. The latter have acted as heat sources and provide the necessary seismic impedance contrasts. The observed seismic anisotropy is attributed to lattice preferred orientation (LPO) of major minerals, in particular of mica and hornblende, but also of olivine. A transversely isotropic symmetry system, such as expected for sub-horizontal layering, is found in only half of the field studies. Azimuthal anisotropy is encountered in the rest of the cases. This indicates differences in the horizontal components of tectonic strain, which finally give rise to differences in the evolution of the rock fabric.  相似文献   

Seismic potential of Southern Italy   总被引：1，自引：2，他引：1  

S. Jenny  S. Goes  D. Giardini  H.-G. Kahle 《Tectonophysics》2006,415(1-4):81-101

To improve estimates of the long-term average seismic potential of the slowly straining South Central Mediterranean plate boundary zone, we integrate constraints on tectonic style and deformation rates from geodetic and geologic data with the traditional constraints from seismicity catalogs. We express seismic potential (long-term average earthquake recurrence rates as a function of magnitude) in the form of truncated Gutenberg–Richter distributions for seven seismotectonic source zones. Seismic coupling seems to be large or even complete in most zones. An exception is the southern Tyrrhenian thrust zone, where most of the African–European convergence is accommodated. Here aseismic deformation is estimated to range from at least 25% along the western part to almost 100% aseismic slip around the Aeolian Islands. Even so, seismic potential of this zone has previously been significantly underestimated, due to the low levels of recorded past seismicity. By contrast, the series of 19 M6–7 earthquakes that hit Calabria in the 18th and 19th century released tectonic strain rates accumulated over time spans up to several times the catalog duration, and seismic potential is revised downward. The southern Tyrrhenian thrust zone and the extensional Calabrian faults, as well as the northeastern Sicilian transtensional zone between them (which includes the Messina Straits, where a destructive M7 event occurred in 1908), all have a similar seismic potential with minimum recurrence times of M ≥ 6.5 of 150–220 years. This potential is lower than that of the Southern Apennines (M ≥ 6.5 recurring every 60 to 140 years), but higher than that of southeastern Sicily (minimum M ≥ 6.5 recurrence times of 400 years). The high seismicity levels recorded in southeastern Sicily indicate some clustering and are most compatible with a tectonic scenario where the Ionian deforms internally, and motions at the Calabrian Trench are small. The estimated seismic potential for the Calabrian Trench and Central and Western Sicily are the lowest (minimum M ≥ 6.5 recurrence times of 550–800 years). Most zones are probably capable of generating earthquakes up to magnitudes 7–7.5, with the exception of Central and Western Sicily where maximum events sizes most likely do not exceed 7.  相似文献   

Geophysical methods applied to fault characterization and earthquake potential assessment in the Lower Tagus Valley, Portugal     

Joo Carvalho  Joo Cabral  Rui Gonalves  Luís Torres  Luís Mendes-Victor 《Tectonophysics》2006,418(3-4):277-297

The study region is located in the Lower Tagus Valley, central Portugal, and includes a large portion of the densely populated area of Lisbon. It is characterized by a moderate seismicity with a diffuse pattern, with historical earthquakes causing many casualties, serious damage and economic losses. Occurrence of earthquakes in the area indicates the presence of seismogenic structures at depth that are deficiently known due to a thick Cenozoic sedimentary cover. The hidden character of many of the faults in the Lower Tagus Valley requires the use of indirect methodologies for their study. This paper focuses on the application of high-resolution seismic reflection method for the detection of near-surface faulting on two major tectonic structures that are hidden under the recent alluvial cover of the Tagus Valley, and that have been recognized on deep oil-industry seismic reflection profiles and/or inferred from the surface geology. These are a WNW–ESE-trending fault zone located within the Lower Tagus Cenozoic basin, across the Tagus River estuary (Porto Alto fault), and a NNE–SSW-trending reverse fault zone that borders the Cenozoic Basin at the W (Vila Franca de Xira–Lisbon fault). Vertical electrical soundings were also acquired over the seismic profiles and the refraction interpretation of the reflection data was carried out. According to the interpretation of the collected data, a complex fault pattern disrupts the near surface (first 400 m) at Porto Alto, affecting the Upper Neogene and (at least for one fault) the Quaternary, with a normal offset component. The consistency with the previous oil-industry profiles interpretation supports the location and geometry of this fault zone. Concerning the second structure, two major faults were detected north of Vila Franca de Xira, supporting the extension of the Vila Franca de Xira–Lisbon fault zone northwards. One of these faults presents a reverse geometry apparently displacing Holocene alluvium. Vertical offsets of the Holocene sediments detected in the studied geophysical data of Porto Alto and Vila Franca de Xira–Lisbon faults imply minimum slip rates of 0.15–0.30 mm/year, three times larger than previously inferred for active faults in the Lower Tagus Valley and maximum estimates of average return periods of 2000–5000 years for M 6.5–7 co-seismic ruptures.  相似文献   

A way to synchronize models with seismic faults for earthquake forecasting: Insights from a simple stochastic model     

lvaro Gonzlez  Miguel Vzquez-Prada  Javier B. Gmez  Amalio F. Pacheco 《Tectonophysics》2006,424(3-4):319

Numerical models are starting to be used for determining the future behaviour of seismic faults and fault networks. Their final goal would be to forecast future large earthquakes. In order to use them for this task, it is necessary to synchronize each model with the current status of the actual fault or fault network it simulates (just as, for example, meteorologists synchronize their models with the atmosphere by incorporating current atmospheric data in them). However, lithospheric dynamics is largely unobservable: important parameters cannot (or can rarely) be measured in Nature. Earthquakes, though, provide indirect but measurable clues of the stress and strain status in the lithosphere, which should be helpful for the synchronization of the models.The rupture area is one of the measurable parameters of earthquakes. Here we explore how it can be used to at least synchronize fault models between themselves and forecast synthetic earthquakes. Our purpose here is to forecast synthetic earthquakes in a simple but stochastic (random) fault model. By imposing the rupture area of the synthetic earthquakes of this model on other models, the latter become partially synchronized with the first one. We use these partially synchronized models to successfully forecast most of the largest earthquakes generated by the first model. This forecasting strategy outperforms others that only take into account the earthquake series. Our results suggest that probably a good way to synchronize more detailed models with real faults is to force them to reproduce the sequence of previous earthquake ruptures on the faults. This hypothesis could be tested in the future with more detailed models and actual seismic data.  相似文献   

山西霍山植物群落主要层LAI垂直分布规律     

杨志芳刘任涛  毕润成 《山地学报》2006,24(B10):307-312

在山西霍山七里峪林场，采用间接的光学测量方法对沿着海拔分布的植物群落主要层叶面积指数（LAI）进行了测量，从不同的角度对LAI的垂直分布规律进行分析。结果表明：1．海拔不同，LAI表现出很大的差异，海拔1750m左右的LAI值大于较高与较低海拔的；对LAI和海拔之间的关系进行回归，得到LAI分布的拟合方程：y=b0＋b1x＋b2x^2＋b3x^3（R=0．712，P〈0．01）。2．同一海拔样带，阴坡LAI均大于阳坡，但对同种种群来说，阴坡树种平均胸径并不一定均大于阳坡。3．植被类型LAI比较表现为：低山针叶林〈低山灌丛〈落叶阔叶林〈落叶针叶林〈常绿针叶林；而主要群系LAI比较表现为：油松林（0．38）〈落叶松林（0．78）〈山杨林及其混交林（1．09）〈白桦林（2．00）〈辽东栎林及其混交林（3．73）。4．典型群落LAI值变化分析和人工林与天然林以，比较表明，LAI值在一定海拔达到最大值，这对于山西霍山人工林栽培和丰产林培育等具有重要意义。  相似文献   

地震快报系统     

邵平荣 《福建地震》2006,(Z2)

本文简述了开发地震快报系统的主要技术。  相似文献   

应用航磁数据分维计算推断火成岩的分布   总被引：2，自引：0，他引：2  

吴小羊  潘佳铁 《物探与化探》2005,29(4):291-294

计算巴彦浩特盆地航磁异常的分维数, 对计算出的分维数绘制等值线图, 并根据分形特征对该地区的火成岩进行划分, 得到了以往直接对航磁异常图进行推断解释所不能得到的良好地质效果。最后讨论如何选取最佳窗口和最佳网格来计算分维数, 并对此提出了2个经验。  相似文献   

中朝板块元古宙板内地震带与盆地格局   总被引：34，自引：3，他引：34  

乔秀夫 《地学前缘》2002,9(3):141-149

地史中发生的强地震事件在地层中留下固定的记录 (图 1～ 3) ,这些记录在区域上呈带状分布 ,代表地史中的地震带。中朝板块元古宙目前可识别出两个板内地震带 (图 5 )。中元古代板内地震带 (170 0～ 12 0 0Ma)西起太行山北段 ,经燕山山脉、辽宁西部、穿越辽河平原至辽宁北部的泛河流域分布 ,即燕山—泛河地震带 ,现今呈NEE向延伸。新元古代震旦纪地震带沿吉林南部、辽东半岛、山东中部及苏皖北部现今呈NNE走向分布 ,即古郯庐地震带 (6 5 0～ 6 0 0Ma)。上述两个板内地震带是元古宙不同时期超大陆裂解的响应。中元古代与新元古代两个不同方向的地震断裂带分别控制着两个时期的盆地边界。燕山泛河地震断裂带构成中元古代海盆南界 (指现在的位置 ) ,形成向北开放的海域。古郯庐地震断裂带将中朝板块裂解为华北块体与胶辽朝块体。古郯庐地震断裂带构成震旦纪海域的边界 ,震旦纪海盆通过朝鲜半岛与当时的外海相连接 ,华北块体则为陆源剥蚀区。文内四幅古地理图 (图 6～ 9)是以地震灾变思想为指导 ,以新的地层研究、对比为基础编制的 ,侧重反映了盆地的格局及其变化。根据地震、同沉积断裂新的思路 ,可提供地质学家重新认识与解释某些沉积矿床的成因 ,它们的成矿元素均来自地球深部而非地表风化作用。文中编制  相似文献   

Structure and tectonic evolution of the Southern Eurasia Basin, Arctic Ocean   总被引：1，自引：0，他引：1  

Sergey B. Sekretov   《Tectonophysics》2002,351(3)

Multichannel seismic reflection data acquired by Marine Arctic Geological Expedition (MAGE) of Murmansk, Russia in 1990 provide the first view of the geological structure of the Arctic region between 77–80°N and 115–133°E, where the Eurasia Basin of the Arctic Ocean adjoins the passive-transform continental margin of the Laptev Sea. South of 80°N, the oceanic basement of the Eurasia Basin and continental basement of the Laptev Sea outer margin are covered by 1.5 to 8 km of sediments. Two structural sequences are distinguished in the sedimentary cover within the Laptev Sea outer margin and at the continent/ocean crust transition: the lower rift sequence, including mostly Upper Cretaceous to Lower Paleocene deposits, and the upper post-rift sequence, consisting of Cenozoic sediments. In the adjoining Eurasia Basin of the Arctic Ocean, the Cenozoic post-rift sequence consists of a few sedimentary successions deposited by several submarine fans. Based on the multichannel seismic reflection data, the structural pattern was determined and an isopach map of the sedimentary cover and tectonic zoning map were constructed. A location of the continent/ocean crust transition is tentatively defined. A buried continuation of the mid-ocean Gakkel Ridge is also detected. This study suggests that south of 78.5°N there was the cessation in the tectonic activity of the Gakkel Ridge Rift from 33–30 until 3–1 Ma and there was no sea-floor spreading in the southernmost part of the Eurasia Basin during the last 30–33 m.y. South of 78.5°N all oceanic crust of the Eurasia Basin near the continental margin of the Laptev Sea was formed from 56 to 33–30 Ma.  相似文献   

Interpretation of seismic and potential field data from western New York State and Lake Ontario     

Khaled Ouassaa  David A. Forsyth   《Tectonophysics》2002,353(1-4)

Lithoprobe and industry seismic profiles have furnished evidence of major zones of easterly dipping Grenville deformed crust extending southwest from exposed Grenville rocks north of Lake Ontario. Additional constraints on subsurface structure limited to the postulated Clarendon–Linden fault system south of Lake Ontario are provided by five east–west reflection lines recorded in 1976. Spatial correlations between seismic structure and magnetic anomalies are described from both Lake Ontario and the newly reprocessed New York lines.In the Paleozoic to Precambrian upper crust, the New York seismic sections show: (1) An easterly thickening wedge of subhorizontal Paleozoic strata unconformably overlying a Precambrian basement whose surface has an apparent regional easterly dip of 1–2°. Minor apparent normal offsets, possibly on the order of tens of meters, occur within the Paleozoic section. The generally poorly reflective unconformity may be locally characterized by topographic relief on the order of 100 m; (2) Apparent local displacement on the order of 90 m at the level of the Black River Group diminishes upward to little or no apparent offset of Queenston Shale; (3) Within the limited seismic sections, there appears to be no evidence that the complete upper crustal section is vertically or subvertically offset; (4) Dipping structure in the Paleozoic strata (15° to 35°) resembles some underlying Precambrian basement elements; (5) The surface continuity of inferred faults constituting the Clarendon–Linden system is not strongly supported by the seismic data.Beneath the Paleozoic strata, the seismic sections show both linear and arcuate reflector geometry with easterly apparent dips of 15° to 35° similar to the deep structures imaged on seismic lines from nearby Lake Ontario and on Lithoprobe lines to the north. The similarity supports an extension of easterly dipping Central Metasedimentary Belt structures of the Grenville orogen from southern Ontario to beneath western New York State.From a comparison of the magnetic and gravity fields with the New York seismic sections, we suggest: (1) The largely nonmagnetic Paleozoic strata appear to contribute negligibly to magnetic anomalies. Seismically imaged fractures in the New York Paleozoic strata appear to lie mainly west of a positive gravity anomaly. The relationship between magnetic and gravity anomalies and the changes in the geometry of interpreted Precambrian structures remains enigmatic; (2) North to northeast trending curvilinear magnetic and gravity anomalies parallel, but are not restricted to the principal trend of the postulated Clarendon–Linden fault system. Paleozoic fractures of the Clarendon–Linden system may partly overlie a southward extension of the Composite Arc Belt boundary zone.  相似文献