首都圈地区现今断层活动的数学模拟及地震危险性讨论     

李群芳  张云柱  高忠宁 《大地测量与地球动力学》1995,(1)

以首都圈地区现今活动断层上近２０年的位移测量资料为依据，用二维线弹性有限元对该区断层的活动特征进行了拟合，并结合有关资料讨论了该区的地震危险性。结果表明：１９７７－１９８６年间该区主压应力优势方位与华北较一致，约为Ｎ４５°－８０°Ｅ；１９８６－１９９０年其主压应力方向向北偏转，约为Ｎ５°－６０°Ｅ；１９９０年至现在其主压应力又向东偏转，角度大于第一阶段，约为Ｎ８０°－９５°Ｅ。该区的张家口－延庆一带近期有发生中强震的可能；丰镇－阳高－大同地区和凉城－古营盘地区应力较高，也应引起注意。  相似文献   

Application of stress release models to historical earthquakes from North China   总被引：5，自引：0，他引：5  

Xiao-Gu Zheng  David Vere-Jones 《Pure and Applied Geophysics》1991,135(4):559-576

Univariate and multivariate stress release models are fitted to historical earthquake data from North China. It is shown that a better fit is obtained by treating separately the Eastern part of the region, including the North China Plain and Bohai Sea, and the Western part of the region, including the Ordos Plateau and its Eastern boundary. Further improvement is obtained by fitting the large events (M7.6) and smaller events in the Western region by different stress release models. The comparisons are made by computing the likelihoods of the fitted models and discounting the number of parameters used by Akaike's AIC criterion. The models are used to develop long-term risk scenarios for the East and West regions.  相似文献   

山西地震综合数据处理系统     

王玲英 《山西地震》1991,(1):4-24

《山西地震综合数据处理系统》是遵循《国家地震局数据库技术规范》,以PDP-11/23~+小型机与IBM/PC联机为硬件支撑,以网状型数据库为核心,含前期处理、库管理、数据检索、科学计算、分析会商5个子系统的较大型应用软件系统。具有对数据进行收集、录入、预处理、存储、管理、加工及应用等功能。整个系统通过总控菜单程序实现了异种机间上百个模块的调度,使查询-处理一体化。该系统把地震数据库、日常监测数据处理、专家地震预报系统有机地衔接于一体,可直接服务于地震科研和震情会商。该系统的建设是山西省重大科技攻关项目,也是国家地震局的合同制项目。  相似文献   

1966年邢台7.2级地震的构造背景和发震构造   总被引：28，自引：4，他引：24       下载免费PDF全文

徐杰  方仲景  杨理华 《地震地质》1988,10(4):51

本文根据石油地质勘探的最新资料和元-济人工地震地壳测深剖面相应地段重新解释的结果,分析了邢台7.2级地震的构造背景和发震断裂。研究结果表明,7.2级地震震中位于束鹿断陷盆地南部次凹的东缘,该次凹发育在由新河断裂等4条缓倾铲形正断裂分制围限地台盖层而成的“斛”状构造块体上,块体之下的地壳中存在两条倾向相反的高角度断裂;地震与断陷主断裂及其控制的断陷盆地并非是简单的对应关系,7.2级地震的发震断裂不是单一的缓倾铲形新河断裂或其下方的高角度的F_3断裂和深部的东断裂,而是它们的组合,且高角度断裂是发震断裂的主要部分  相似文献   

Quaternary fault segmentation and interaction in the epicentral area of the 1561 earthquake (Mw = 6.4), Vallo di Diano, southern Apennines, Italy     

V. Spina  E. Tondi  P. Galli  S. Mazzoli  G. Cello 《Tectonophysics》2008,453(1-4):233

The main structural characteristics of the Caggiano and Polla faults, exposed in the epicentral area of the 1561 earthquake (Mw = 6.4), southern Italy, have been investigated in detail to assess their spatial and temporal properties, and to evaluate their seismogenic potential. These right stepping normal faults show an overlap of about 7 km and an across strike separation of about 4 km. The geometric relationships between the Caggiano and Polla faults, but also the displacement distribution along each fault, demonstrate that they have been strongly interacting throughout the Pleistocene. Nevertheless, geological evidence of Holocene tectonic activity was mainly recognized along the Caggiano Fault (faulted late glacial deposits) and in the southernmost part of the Polla Fault (faulted deposits of probably Late Pleistocene age). This suggests that the Caggiano Fault can be considered as the most tectonically active fault in the Vallo di Diano Fault System. By calculating Coulomb stress changes, we have constrained modes of mechanical interactions between the two faults in a scenario compatible with the 1561 earthquake. This approach allows us to argue that both the Caggiano and the Polla Faults are probably linked at depth, and part of the same seismogenic structure which may be potentially responsible for composite ruptures with magnitude ≥ 6.5.  相似文献   

RETRACTION: Numerical simulation of a wind-sand flow under different conditions of atmospheric stability     

LÜ PING  ZHIBAO DONG 《Sedimentology》2008,55(3):721-721

A theoretical model for wind‐sand flow is developed by considering the coupling between wind flow and sand particle motion, the latter subject to the Magnus effect, under different atmospheric stability conditions. Using this model, the characteristics of the wind‐sand flow are discussed in detail. The results show that the atmospheric stability and the Magnus effect both have a strong influence on wind profiles and on the trajectories of sand particles. This approach produces results with characteristics that differ from those previously reported; the latter only applying to atmospheric conditions of neutral stability. The saltating sand reaches a greater height under non‐neutral stability than under neutral stability, while the maximum horizontal distance is greater under unstable conditions and is smaller under stable conditions than under conditions of neutral stability.  相似文献   

Numerical modeling for analyzing thermal surface anomalies induced by underground coal fires     

Stefan Wessling  Claudia Kuenzer  Winfried Kessels  Manfred W. Wuttke 《International Journal of Coal Geology》2008,74(3-4):175-184

Coal seams burning underneath the surface are recognized all over the world and have drawn increasing public attention in the past years. Frequently, such fires are analyzed by detecting anomalies like increased exhaust gas concentrations and soil temperatures at the surface. A proper analysis presumes the understanding of involved processes, which determine the spatial distribution and dynamic behavior of the anomalies.In this paper, we explain the relevance of mechanical and energy transport processes with respect to the occurrence of temperature anomalies at the surface. Two approaches are presented, aiming to obtain insight into the underground coal fire situation: In-situ temperature mapping and numerical simulation. In 2000 to 2005, annual temperature mapping in the Wuda (Inner Mongolia, PR China) coal fire area showed that most thermal anomalies on the surface are closely related to fractures, where hot exhaust gases from the coal fire are released. Those fractures develop due to rock mechanical failure after volume reduction in the seams. The measured signals at the surface are therefore strongly affected by mechanical processes.More insight into causes and effects of involved energy transport processes is obtained by numerical simulation of the dynamic behavior of coal fires. Simulations show the inter-relation between release and transport of thermal energy in and around underground coal fires. Our simulation results show a time delay between the coal fire propagation and the observed appearance of the surface temperature signal. Additionally, the overall energy flux away from the burning coal seam into the surrounding bedrock is about 30-times higher than the flux through the surface. This is of particular importance for an estimation of the energy released based on surface temperature measurements. Finally, the simulation results also prove that a fire propagation rate estimated from the interpretation of surface anomalies can differ from the actual rate in the seam.  相似文献   

Belemnites from the lower middle Cenomanian of Hoppenstedt, northern Germany: significance and integrated correlation     

Markus Wilmsen  Michel Rabe 《Cretaceous Research》2008,29(5-6):936

The belemnite species Praeactinocamax primus (Arkhangelsky, 1912) and Belemnocamax boweri Crick, 1910 are described from the Cenomanian of the abandoned limestone quarry section of Hoppenstedt (Sachsen-Anhalt, northern Germany). They co-occur in the upper part of a prominent tripartite bioclastic limestone bed associated with the ammonite Acanthoceras rhotomagense, indicating the primus Event of the lower middle Cenomanian A. rhotomagense ammonite Zone. An integrated stratigraphical calibration including carbon stable isotope correlation to southern England suggests that the belemnite event horizon at Hoppenstedt occupies exactly the same chronostratigraphical position as elsewhere, highlighting the strictly isochronous character of the primus Event across northwestern Europe. Furthermore, stratigraphical gaps in the Hoppenstedt succession are evaluated.  相似文献   

四川汶川MS 8.0大地震地表破裂带的遥感影像解析   总被引：21，自引：1，他引：20  

付碧宏  时丕龙  张之武 《地质学报》2008,82(12):1679-1687

2008年5月12日发生于四川盆地西部龙门山断裂带的汶川MS 8.0级大地震造成巨大的人员伤亡和财产损失,并形成了空间上基本连续分布的地表破裂带（地震断层）。根据地表破裂带的解译标志及影像特征,我们充分利用震后中国科学院航空遥感飞机所获取的高分辨率航空遥感图像以及我国台湾福卫-2卫星遥感图像进行详细解译分析,并结合震后的多次野外科学考察与验证,初步查明了四川汶川MS 8.0级大地震所产生地表破裂带的空间分布特征。遥感解译分析表明汶川大地震产生的地表破裂带总计长约300 km,其几何学特征十分复杂,主要沿先存的NE走向活动断裂带呈不连续展布;变形特征以逆冲挤压为主兼具右旋走滑分量。按同震地表破裂带所在断裂带位置,可将其分为两条： 中央地表破裂带：沿映秀-北川断裂带分布,从西南开始呈北东向延伸至平武县水观乡石坎子北东一带,长约230 km,最大垂直位移量达6.0 m左右,最大右旋水平位移达5.8 m;山前地表破裂带：沿灌县-安县断裂带分布,由都江堰市向峨乡一带开始呈北东向延伸至安县雎水镇一带,长约70 km,以逆冲挤压为主,最大垂直位移量可达2.5 m。此外,遥感图像分析还表明上述地表破裂带与地质灾害分布在空间上具有十分密切的相关性,因此,挤压逆冲-走滑型地震断层的致灾效应研究是未来应该加以重视的研究课题。  相似文献   

汶川大地震（MS 8.0）同震变形作用及其与地质灾害的关系   总被引：12，自引：2，他引：10  

付小方  侯立玮  李海兵  王宗秀  邹付戈 《地质学报》2008,82(12):1733-1746

2008年5月12日发生于四川盆地西部龙门山断裂带的汶川大地震（MS 8.0）波及半个亚洲,震撼整个中国。本文通过地震后的实地调查,对发育在龙门山断裂带上的同震地表破裂带的分布、产状、继承性复活与变形特征,以及同震变形与地震地质灾害的关系等进行了初步总结,分析表明这次汶川大地震(MS 8.0)沿北川-映秀逆冲断裂和安县-灌县逆冲断裂同时发生地表破裂,前者产生以高角度逆冲兼右旋走滑为特征的地表破裂带长约275 km,后者产生以缓倾角逆冲作用为特征的地表破裂带长约80 km。汶川大地震的同震地表破裂带分布具有分段性特征,并与地表破坏程度的分带性有着一定的内在联系,详细研究表明,同震地表破裂带的产状直接影响地表破坏程度和地震地质灾害的强度,汶川大地震（MS 8.0）沿呈高角度陡倾的北川-映秀逆冲断裂发育的同震地表变形所产生的地表破坏程度和地震地质灾害的强度比沿缓倾角的安县-灌县逆冲断裂要强。从各种类型的地震断裂来看,具有垂直运动的逆冲型地震断裂所造成的地表破坏程度和地质灾害强度比具水平运动的走滑型地震断裂要强。因此,汶川大地震发生的破裂过程和同震地表变形与地震地质灾害的关系值得深入研究。  相似文献