Thresholds of intrabed flow and other interactions of turbidity currents with soft muddy substrates          下载免费PDF全文

Jaco H. Baas  Rafael Manica  Eduardo Puhl  Ana Luiza de Oliveira Borges 《Sedimentology》2016,63(7):2002-2036

Controlled laboratory experiments reveal that the lower part of turbidity currents has the ability to enter fluid mud substrates, if the bed shear stress is higher than the yield stress of the fluid mud and the density of the turbidity current is higher than the density of the substrate. Upon entering the substrate, the turbidity current either induces mixing between flow‐derived sediment and substrate sediment, or it forms a stable horizontal flow front inside the fluid mud. Such ‘intrabed’ flow is surrounded by plastically deformed mud; otherwise it resembles the front of a ‘bottom‐hugging’ turbidity current. The ‘suprabed’ portion of the turbidity current, i.e. the upper part of the flow that does not enter the substrate, is typically separated from the intrabed flow by a long horizontal layer of mud which originates from the mud that is swept over the top of the intrabed flow and then incorporated into the flow. The intrabed flow and the mixing mechanism are specific types of interaction between turbidity currents and muddy substrates that are part of a larger group of interactions, which also include bypass, deposition, erosion and soft sediment deformation. A classification scheme for these types of interactions is proposed, based on an excess bed shear stress parameter, which includes the difference in the bed shear stress imposed by the flow and the yield stress of the substrate and an excess density parameter, which relies on the density difference between the flow and the substrate. Based on this classification scheme, as well as on the sedimentological properties of the laboratory deposits, an existing facies model for intrabed turbidites is extended to the other types of interaction involving soft muddy substrates. The physical threshold of flow‐substrate mixing versus stable intrabed flow is defined using the gradient Richardson number, and this method is validated successfully with the laboratory data. The gradient Richardson number is also used to verify that stable intrabed flow is possible in natural turbidity currents, and to determine under which conditions intrabed flow is likely to be unstable. It appears that intrabed flow is likely only in natural turbidity currents with flow velocities well below ca 3·5 m s^?1, although a wider range of flows is capable of entering fluid muds. Below this threshold velocity, intrabed flow is stable only at high‐density gradients and low‐velocity gradients across the upper boundary of the turbidity current. Finally, the gradient Richardson number is used as a scaling parameter to set the flow velocity limits of a natural turbidity current that formed an inferred intrabed turbidite in the deep‐marine Aberystwyth Grits Group, West Wales, United Kingdom.  相似文献   

绿柱石与硅铍石原位结晶实验研究     

王娴  李建康  丁欣  张德会 《地质论评》2016,62(S1):407-408

绿柱石与硅铍石均为铍矿物家族中的主要成员,是重要的工业铍矿物,利用背散射和电子探针研究矿物特性时,常可见两者共生或发生交代的现象（饶灿,2009;Reyf, 2008; Evensen, 1999）,其结晶条件对于成矿环境与成矿机制均具有重要的指示意义。前人已进行了关于绿柱石,硅铍石等铍矿物稳定性的实验研究,但研究多采用高温淬火的高温高压实验装置,误差大,且无法原位观测矿物结晶习性（王振杰, 1992;Sirbescu et al., 2009）,本文利用热液金刚石压腔,原位观测了绿柱石与硅铍石的结晶过程,得到了它们结晶的温压条件及结晶习性。  相似文献   

Seismicity and fault aseismic deformation caused by fluid injection in decametric in-situ experiments     

《Comptes Rendus Geoscience》2018,350(8):464-475

Seismicity induced by fluid perturbations became an important societal concern since felt earthquakes (M_w up to 6) occurred after anthropogenic activities. In order to mitigate the risks associated with undesired seismicity, as well as to be able to use the micro-seismicity as a probe for in-depth investigation of fluid-driven processes, it is of crucial importance to understand the links between seismicity, fluid pressure and flow. We have developed a series of in-situ, decameter-scale experiments of fault zone reactivation by controlled fluid injection, in order to improve the near-source geophysical and hydromechanical observations. The deployed geophysical monitoring close to the injection allows one to cover the full frequency range of the fault responses from the static deformation to the very high-frequency seismic emissions (up to 4 kHz). Here, we focus on the microseismicity (M_w ∼ –4 to –3) recorded during two fluid injection experiments in low-permeable shale and highly-fractured limestone formations. In both experiments, the spatio-temporal distribution of the seismic events, the energy balance, and the seismic velocity changes of the fractured medium show that most of the deformation does not actually emit seismic signals. The induced deformation is mainly aseismic. Based on these high-resolution multiparametric observations in the near-field, we therefore proposed a new model for injection-induced seismicity: the seismicity is not directly induced by the increasing fluid pressure, but it is rather triggered by the stress perturbations transferred from the aseismic motion caused by the injection.  相似文献   

Stress‐dependent hardening and failure surfaces of dry sand     

W. Ehlers  O. Avci 《国际地质力学数值与分析法杂志》2013,37(8):787-809

During several triaxial compression experiments on plastic hardening, softening, and failure properties of dense sand specimens, it was found on various stress paths that the size of the failure surface was not constant. Instead, it changed depending on the current state of hydrostatic pressure. This finding is in contrast to the standard opinion consisting of the fact that the failure surface remains constant, once it has been reached during an experiment or in situ. In general, the behaviour of cohesionless granular‐material‐like sand is somehow characterised in between fluid and solid, where the solid behaviour results from the angle of internal friction and the confining pressure. Although the friction angle is an intrinsic material property, the confining pressure varies with the boundary conditions, thus defining different solid properties like plastic hardening, softening, and also failure. Based on our findings, it was the goal of the present contribution to introduce an improved setting for the plastic strain hardening and softening behaviour including the newly found yield properties at the limit state. For the identification of the material parameters, a complete triaxial experimental analysis of the tested sand is given. The overall elasto‐plasticity concept is validated by numerical computations of several laboratory foundation‐ and slope‐failure experiments. The performance of the proposed approach is compared with the standard concept of a constant failure surface, where the corresponding yield surfaces are understood as contours of equivalent plastic work or plastic strain. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

剩磁-温度谱与冷却模式          下载免费PDF全文

许同春  D.H.Tarling 《地球物理学报》1988,31(3):315-328

本文解释热剩磁和粘滞剩磁的阻挡过程。较慢冷却伴随较低的阻挡温度。一组同一的磁颗粒,其实验室解阻温度不一定等于其磁化成分的阻挡温度。冷却速率不同,重排剩磁量会不同,两者的关系与磁畴状态有关。距烘烤体不同距离采集磁颗粒分布相同的围岩样品,在一定场合下,根据其剩磁-实验室解阻温度谱所示的重排剩磁量的差别,可讨论冷却速度及模型。本文列举苏格兰某些围岩的不同重排剩磁量,讨论有关问题。  相似文献   

Bifurcation of volcanic plumes in a crosswind     

Gerald G. J. Ernst  John P. Davis  R. Stephen J. Sparks 《Bulletin of Volcanology》1994,56(3):159-169

Bent-over buoyant jets distorted by a crosscurrent develop a vortex pair structure and can bifurcate to produce two distinct lobes which diverge from one another downwind. The region downwind of the source between the lobes has relatively low proportions of discharged fluid. Factors invoked by previous workers to cause or enhance bifurcation include buoyancy, release of latent heat at the plume edge by evaporating water droplets, geometry and orientation of the source, and the encounter with a density interface on the rising path of the plume. We suggest that the pressure distribution around the vortex pair of a rising plume may initially trigger bifurcation. We also report new experimental observations confirming that bifurcation becomes stronger for stronger bent-over plumes, identifying that bifurcation can also occur for straight-edged plumes but gradually disappears for stronger plumes which form a gravity current at their final level and spread for a significant distance against the current. Observations from satellites and the ground are reviewed and confirm that volcanic plumes can show bifurcation and a large range of bifurcation angles. Many of the bifurcating plumes spread out at the tropopause level and suggest the tropopause may act on the plumes as a density interface enhancing bifurcation. Even for quite moderate bifurcation angles, the two plume lobes become rapidly separated downwind by distances of tens of kilometers. Such bifurcating plumes drifting apart can only result in bilobate tephra fall deposits. The tephra fall deposit from the 16 km elevation, SE spreading, bifurcating volcanic plume erupted on 15 May 1981 from Mt Pagan was sampled by previous workers and clearly displayed bilobate characteristics. Examples of bilobate tephra fall deposits are reviewed and their origin briefly discussed. Bilobate deposits are common and may result from many causes. Plume bifurcation should be considered one of the possible mechanisms which can account for come examples of bilobate tephra fall deposits.  相似文献   

矿山地震研究述评   总被引：9，自引：2，他引：9  

张少泉  张诚 《地球物理学进展》1993,8(3):69-85

就采矿引起的诱发地震活动,即矿山地震的国际研究动态进行评述.重点介绍矿山地震的命名、早期观测与研究、几个主要矿震国家的情况、矿震的分类、矿震的震源机制、矿震震源参数与定标率等问题.还就利用矿山作为天然地震的预报实验场和作为地震技术的推广市场问题进行探讨.  相似文献   

A GLOBAL COUPLED OCEAN-ATMOSPHERE MODEL OF SHALLOW WATER WAVE AND ITS NUMERICAL EXPERIMENTS   总被引：2，自引：0，他引：2       下载免费PDF全文

Liu Yimin  Jiang Dayong  Yang Meiyu 《Acta Meteorologica Sinica》1991,5(4):435-441

A global coupled air-sea model of shallow water wave is developed based on coupled ocean-atmospheredynamics.The coupling is realized through the air-sea interaction process that the atmosphere acts on theocean by wind stress and the ocean acts on the atmosphere with heating proportional to sea surface temperature(SST)anomaly.The equation is harotropic primitive one.Response experiments of coupling system arealso carried out SSTA in two categories of intensities.Compared with the results of AGCM simulation ex-periment in which only the dynamic change of air system is considered,it demonstrates that the air-seainteraction between the tropical ocean and the global atmosphere plays a very important role in the evolutionof climate system.The results of numerical simulation show that it is encouraging.  相似文献   

Fast-changing processes in a medium subject to loading as detected by resistivity measurements     

Wojciech Stopiński  Gienadiy A. Sobolev  Aleksandr W. Ponomaryov  Vladimir Los 《Pure and Applied Geophysics》1991,136(1):49-58

Making measurements of electric resistivity at 16 s intervals, the authors noticed fast changes of this parameter prior to the occurrence of the main fracture. The changes are superposed on bay pulsations of increasing amplitude and decreasing period. This finding opens prospects for a wider use of an electric resistivity method and proves the high quality of automatic instruments, in particular their high resolution. It also gives evidence for the occurrence of short-period precursors in the fracture zone while the main fracture is being formed.  相似文献   

从模拟实验的结果看底辟发育的力学机制     

Zhang Jiahua 《地球科学》1986,(3)

底辟构造在我国东部沉积盆地中有广泛的分布,并蕴藏有丰富的油气资源。作者模拟了隐刺穿构造的发育过程及其变形特征,从而分析底辟发育的力学机制。实验结果表明,底辟的形成时间和底辟核的形态对底辟变形有重大影响。绝大多数隐刺穿构造。在其顶部都发育一个地堑断裂系,这是底辟构造的共同特征。  相似文献