基于核磁共振测井的低渗透砂岩孔隙结构定量评价方法——以东营凹陷南斜坡沙四段为例   总被引：7，自引：0，他引：7       下载免费PDF全文

闫建平  温丹妮  李尊芝  耿斌  蔡进功  梁强  言语 《地球物理学报》2016,59(4):1543-1552

低渗透砂岩油气藏已成为油气增储生产的重要勘探开发目标,但孔隙结构复杂使得储层及其有效性难以准确识别.笔者利用物性、压汞、核磁等资料,对东营凹陷南坡沙四段(Es4)低渗透砂岩孔隙结构进行分析,划分出了3种类型.核磁T2谱与毛管压力曲线都在一定程度上反映孔喉分布,但常规方法利用T2谱重构伪毛管压力曲线所得到的孔隙半径与压汞孔喉半径有较大误差,而岩石孔隙自由流体T2与压汞孔喉分布对应关系更好,以此建立了不同孔隙结构类型二者之间不同孔喉尺度对应的关系式(大尺度:线性;小尺度:分段幂函数),可在井筒剖面上通过识别孔隙结构类型,进而利用核磁共振测井(NML)定量反演孔径分布,省去了构建伪毛管曲线环节,为低渗透砂岩储层有效性评价提供了直接依据,也是测井用于定量反演储层微观孔隙结构信息的有益探索.  相似文献   

加筋土挡墙静载模型试验及其力学性能研究     

李丽华  石安宁  肖衡林  胡智  杨俊超  余长道 《岩土力学》2018,39(12):4360-4368

为研究加筋土挡墙在墙顶荷载作用下土体受力和变形形态,通过改变筋材层数、筋材长度和替换加筋材料等方式对加筋土挡墙进行了4种工况的模型试验。对4种工况下的加筋土墙体内竖向土压力、墙面水平位移、墙顶竖向位移和筋材应变等进行对比研究。研究表明,挡墙上部竖向土压力增长较快且各层竖向土压力最大值由加载点下部向墙面处移动;墙顶荷载超过130 kPa时,由于不均匀沉降,第5层筋材对应墙面处有向内收缩趋势,墙面水平位移最大值大约在上三分点位置;整个加载阶段,筋材总体应变值增幅不大且远小于筋材设计应变峰值;增加挡墙内筋材层数和增加筋材长度均可提升挡墙各方面性能,但增加筋材层数提高效果要优于增加筋材长度;使用废旧轮胎代替单向格栅进行加筋可有效提高挡墙整体性能,分散超载引起的附加应力,有效减小墙面水平位移和墙顶竖向位移。  相似文献   

高放废物处置北山预选区地表岩体结构与岩体质量相关性及其应用研究     

宗自华  陈亮  陈强  魏云杰  王锡勇  王驹 《岩土力学》2013,34(Z1):279-284

岩体工程质量是影响高放废物地质处置（HLW）工程长期稳定性和安全性的关键因素,也是处置库场址比选的重要依据。在地表岩体节理调查统计的基础上,采用RMR(relative metabolic rate)分级方案,探讨北山高放废物处置预选区内以花岗岩为主体围岩的岩体质量与岩体结构的对应特征,建立结构面间距D与RMR岩体质量总评分值之间的定量关系,对北山预选区芨芨槽地表岩体质量分布进行研究。研究结果表明,RMR与D值的点群分布具有扇形发散的正相关特征,随D值的增大,RMR亦呈增长趋势,但低级序岩体结构与岩体质量比高级序岩体表现出更好的对应关系。研究认为,选用RMR与D的点群中心线对应的线性方程评价花岗岩候选区的岩体质量可达到快速评价岩体质量、查明各级岩体空间分布特征的目的,同时也便于对不同候选场区进行大范围岩体质量对比。分析结果显示,北山芨芨槽预选地段BS16钻孔周边3 km2范围内主要以Ⅰ、Ⅱ级岩体为主,岩体质量总体较好且分布相对较为均匀。  相似文献   

Investigation of the Possibility of Copper Removal from Industrial Leachate by Raw and Calcined Phosphogypsum: D‐Optimal and Taguchi Designs     

Başak Mesci  Nurdan Gamze Turan  Okan Ozgonenel 《洁净——土壤、空气、水》2012,40(8):850-855

In the present study, the removal of Cu(II) was evaluated by raw and calcined phosphogypsum (PG) as an industrial product. The role of experimental factors on the removal of Cu(II) was examined by using D‐optimal and Taguchi designs. The experimental factors and their related levels were selected as initial pH of 3–6–8, adsorbent content of 5, 10, and 25 g L^?1, contact time of 5, 10, and 20 min, and temperature of 20, 40, and 60°C. The results are evaluated by ANOVA test to extract important experimental factors and their levels. The performances of the suggested factorial designs were then compared and regression models that took into account the significant main and interaction effects were suggested. Taguchi design was found as a reliable solution with less number of experiments for adsorption studies with the optimized values. The resultant removal efficiency is calculated as 78.34%. The results revealed that calcined PG is an appropriate adsorbent for Cu(II) removal from leachate of industrial waste.  相似文献   

Landfill Leachate Treatment: A Case Study for Istanbul City     

Cevat Yaman  Huseyin Kurtulus Ozcan  Goksel Demir  Hatice Eser Okten  Senol Yildiz  Asli Coban  Vahit Balahorli 《洁净——土壤、空气、水》2012,40(7):706-711

One of the most important problems arising from landfilling solid wastes is the leachate which contains high amount of pollution. Discharge of leachate without treatment causes negative effects on environmental and public health. In this study, parameters of chemical oxygen demand (COD), total nitrogen (TN), ammonia nitrogen (NH₄‐N), and total phosphorus (TP) were examined in the samples taken from the influent and effluent of leachate treatment plant, where Odayeri landfill leachate is treated. Obtained results showed that the treatment plant, which consisted of preanoxic biological treatment system, ultrafiltration (UF) and nanofiltration (NF) units were operating with high efficiency. Among the examined parameters during study, COD, TN, NH₄‐N, and TP were found to be treated at the rate of 99, 94.5, 99, and 93.8%, respectively. Landfilling is increasing rapidly in the world and this consequently brings the need of leachate treatment facilities. Therefore, this study is considered to be a guide for construction and operation stages of proposed new treatment plants.  相似文献   

铁碳微电解-Fenton氧化处理海上废弃钻井液液相实验   总被引：1，自引：1，他引：0  

岳前升  杨立平  朱益辉  吴洪特  白超峰  傅雄涛  马锡涛 《东北石油大学学报》2012,(3):86-89,10

为处理海上油田废弃钻井液,以我国海上油田广泛使用的有机正电胶钻井液为例,研究采用铁碳微电解-Fenton氧化处理工艺可行性.结果表明,废弃有机正电胶钻井液及其固液分离后的废水COD超过废水排放标准.优化铁碳微电解-Fenton氧化的适宜条件:微电解时间不低于3h;双氧水质量分数为0.5%,氧化时间为2h.铁碳微电解-Fenton氧化处理工艺对废弃钻井液废液COD有较明显的处理效果,但一轮次处理无法达到排放标准.铁碳微电解-Fenton氧化—次氯酸钠深度氧化以及多轮次铁碳微电解-Fenton氧化处理可以使固液分离后的废弃钻井液达到工业污水排放二级标准.  相似文献   

Recycling of Cathode Ray Tubes (CRTs) in Electronic Waste     

Sunil Herat 《洁净——土壤、空气、水》2008,36(1):19-24

The management of used electrical and electronic equipment (EEE) or e‐waste is a significant problem worldwide due to rapid uptake of the technology and early obsolescence of EEE. Cathode ray tubes (CRTs) from used televisions and computer monitors represent a major e‐waste problem as they consist of glass with different compositions. The front panel is a lead‐free barium‐strontium glass whereas parts such as the funnel hidden inside are composed of glass with lead oxides. Regulations require the glass from waste CRTs to be recycled or re‐utilized. Closed‐loop recycling and open‐loop recycling are two principal ways of recycling CRT glass. The aim of this paper is to examine the technical characteristics and composition of the CRTs, its generation, environmental impacts and related regulatory requirements and to review the current technologies and their limitations for recycling CRT glass and its end use.  相似文献   

Tracking the North Korean nuclear explosion of 2006, using seismic data from Japan and satellite data from Taiwan     

Bor-Shouh Huang   《Physics of the Earth and Planetary Interiors》2008,167(1-2):34-38

The location of the 2006 nuclear explosion in North Korea has been accurately imaged by back-projected regional Pn waves recorded by the Japanese Hi-net array. Based on the determined location, the nuclear explosion site can be identified from geo-referenced FORMOSAT-2 satellite images. The seismically determined epicenter is about 2.5 km northeast of the original estimate of its absolute location. Results indicate that a remote suspect event had been unambiguously detected and accurately located by a dense array within a regional distance. Employing ground truth correction, the satellite images can be referenced for shifting the array-determined epicenter to its absolute position. After correction, this event can be treated as a reference event for accurately locating future nuclear explosions. Our study utilizes public information from a dense seismic network and further demonstrates that commercial observation satellites can accurately monitor compliance with the Comprehensive Nuclear-Test-Ban Treaty, as well as earthquake and tsunami hazards almost in real time.  相似文献   

Pore size distributions and hydraulic conductivities of rocks derived from Magnetic Resonance Sounding relaxation data using multi-exponential decay time inversion   总被引：3，自引：0，他引：3  

O. Mohnke  U. Yaramanci   《Journal of Applied Geophysics》2008,66(3-4):73

In hydrogeology there is a variety of empirical formulae available for determination of hydraulic conductivity of porous media, all based on the analysis of grain size distributions of aquifer materials. Sensitivity of NMR measurements to pore sizes makes it a good indicator of hydraulic conductivity. Analogous to laboratory NMR, Magnetic Resonance Sounding (MRS) relaxation data are of a multi-exponential (ME) nature due to the distribution of different pore sizes in an investigated rock layer. ME relaxation behaviour will also arise due to the superposition of NMR signals which originate from different layers. It has been shown, that both kinds of ME behaviour coexist in MRS and can principally be separated by ME inversion of the field data. Only a few publications exist that have proposed approaches to qualitatively and quantitatively estimate petrophysical parameters such as the hydraulic conductivity from MRS measurements, i.e. MRS porosity and decay times. The so far used relations for the estimation of hydraulic conductivity in hydrogeology and NMR experiments are compared and discussed with respect to their applicability in MRS. Taking into account results from a variety of laboratory NMR and MRS experiments mean rock specific calibration factors are introduced for a data-base-calibrated estimation of hydraulic conductivity when no on-site calibration of MRS is available. Field data have been analysed using conventional and ME inversion using such mean calibration values. The results for conventional and ME inversion agree with estimates obtained from well core analysis for shallow depths but are significantly improved using a ME inversion approach for greater depths.  相似文献   

填埋场垃圾中优先流特征的染色示踪试验     

张文杰  杨金康 《岩土力学》2019,40(5):1847-1853

生活垃圾具有大孔隙特性,垃圾中水分运动常表现出优先流特征。针对垃圾组成复杂、难以切片的特点,设计了一种能方便地得到垃圾染色剖面的试验方法。使用填埋场不同深度处的垃圾样进行染色示踪试验,对染色后的垃圾柱分别进行水平切片和竖向切片。基于数字图像处理技术,研究了垃圾中优先流特征。垃圾中大孔隙多、基质少,染色模式与土中不同,基质部分的染色比例较高。试验所得的染色面积比和染色深度能反映出垃圾中优先流的明显程度,染色面积比与参与优先流的大孔隙比例有关,染色面积比越大,优先流越明显,而染色深度与基质流比例有关,上部垃圾中基质流比例越低,入渗深度越深。不同入渗强度的试验结果表明,入渗强度越大时垃圾中优先流程度越高;不同初始含水率的试验结果表明,初始含水率高的垃圾试样中优先流更明显;不同埋深垃圾试样的试验结果表明,浅层垃圾中更易产生优先流。竖向切片与水平向切片所得规律完全一致,试验方法在实现垃圾染色示踪和切片研究的同时,未改变垃圾中优先流原有规律,准确揭示了垃圾中优先流特征。  相似文献