Yield surfaces and flow rules for deformation of granular materials with a volume constraint     

C.M. Sands  H.W. Chandler 《Computers and Geotechnics》2010

This paper presents a procedure for developing yield functions with consistent flow rules for granular materials from a family of two parameter dissipation functions in combination with appropriate kinematic constraints. Through a mathematical procedure described in the paper, a general formulation is developed that can, by adjusting the values of the two parameters, reproduce a wide range of yield surfaces, including the Drucker–Prager, Matsuoka–Nakai, and Lade–Duncan. Specifically, an analytical expression for the yield function is obtained in terms of a parameter that is a selected solution to a high order polynomial. The roots of this polynomial can always be found using the eigenvalues of the companion matrix and instructions on how to select the appropriate root are given in the paper. Two ways of incorporating anisotropy into the procedure are explored and the role within it of the recent history of deformation is examined.  相似文献   

生物技术清洁生产替代高污染化学法制备甲壳素的研究与应用   总被引：1，自引：0，他引：1       下载免费PDF全文

周湘池  刘必谦  郭春苹  王亚军 《海洋与湖沼》2008,39(5):517-522

从虾壳中分离到一株乳杆菌BR-3,研究发现其最佳发酵起始pH为6.50,最佳培养温度为35℃,在此培养温度下达到对数生长期的时间为42h。采用乳杆菌发酵方法,进行了虾壳制备甲壳素的研究,比较了接种量、葡萄糖加入量、发酵时间等因素对产品质量的影响。结果表明,当接种量为10%、葡萄糖浓度为4.5%、固液比为1︰3、发酵温度为(35±2)℃、发酵时间为3—4d时,平均灰分去除率达95.67%,甲壳素产品灰分含量均小于6%,最低可达1%,产品质量等于或优于传统的酸碱生产方法。发酵液可部分或全部回收,洗涤废水可作下一轮发酵用水,生产废水接近零排放。虾壳乳酸发酵法生产甲壳素是一种清洁生产方法。BR-3培养时间短,培养条件粗放,温度和pH适应范围宽,产酸效率高,残糖少,适合于工业化生产。  相似文献   

Optimized experimental design for seismic full waveform inversion: A computationally efficient method including a flexible implementation of acquisition costs     

Valrie Krampe  Pascal Edme  Hansruedi Maurer 《Geophysical Prospecting》2021,69(1):152-166

Optimized experimental design aims at reducing the cost of a seismic survey by identifying the optimal locations and amounts of sources and receivers. While the acquisition design in the context of seismic imaging applies criteria like fold, offset and spatial sampling, different attributes such as the sensitivity kernels are more relevant for seismic full waveform inversion. An ideal measure to quantify the goodness of an acquisition design relies on the eigenvalue spectrum of the approximate Hessian matrix, but this technique is computationally too expensive for practical use. A more affordable goodness measure has been proposed in the past, but we demonstrate that this measure is inappropriate for target‐oriented optimized experimental design. To address those issues, we derived a sequential receiver‐based procedure using a goodness measure based on the determinant of the approximate Hessian matrix. We show with numerical tests that it efficiently provides an optimized design for target‐oriented as well as for extensive full waveform inversion. This design allows a better reconstruction of the subsurface than an evenly spaced acquisition geometry. Furthermore, the optimization algorithm itself can easily be parallelized, therefore making it attractive for applications to large‐scale three‐dimensional surveys. In addition, our algorithm is able to incorporate variable costs, representing any kind of acquisition‐related costs, for every individual source location. The combined optimization with respect to the information content of sources and to the true cost will allow a more comprehensive and realistic survey planning and has a high potential for further applications.  相似文献   

Aggregation of LoD 1 building models as an optimization problem     

R. Guercke  T. Götzelmann 《ISPRS Journal of Photogrammetry and Remote Sensing》2011,66(2):209-222

3D city models offered by digital map providers typically consist of several thousands or even millions of individual buildings. Those buildings are usually generated in an automated fashion from high resolution cadastral and remote sensing data and can be very detailed. However, not in every application such a high degree of detail is desirable. One way to remove complexity is to aggregate individual buildings, simplify the ground plan and assign an appropriate average building height. This task is computationally complex because it includes the combinatorial optimization problem of determining which subset of the original set of buildings should best be aggregated to meet the demands of an application.In this article, we introduce approaches to express different aspects of the aggregation of LoD 1 building models in the form of Mixed Integer Programming (MIP) problems. The advantage of this approach is that for linear (and some quadratic) MIP problems, sophisticated software exists to find exact solutions (global optima) with reasonable effort. We also propose two different heuristic approaches based on the region growing strategy and evaluate their potential for optimization by comparing their performance to a MIP-based approach.  相似文献   

Multi-tier interactive genetic algorithms for the optimization of long-term reservoir operation   总被引：1，自引：0，他引：1  

Kuo-Wei WangLi-Chiu Chang  Fi-John Chang 《Advances in water resources》2011,34(10):1343-1351

Genetic algorithms (GAs) are well known optimization methods. However, complicated systems with high dimensional variables, such as long-term reservoir operation, usually prevent the methods from reaching optimal solutions. This study proposes a multi-tier interactive genetic algorithm (MIGA) which decomposes a complicated system (long series) into several small-scale sub-systems (sub-series) with GA applied to each sub-system and the multi-tier (key) information mutually interacts among individual sub-systems to find the optimal solution of long-term reservoir operation. To retain the integrity of the original system, over the multi-tier architecture, an operation strategy is designed to concatenate the primary tier and the allocation tiers by providing key information from the primary tier to the allocation tiers when initializing populations in each sub-system. The Shihmen Reservoir in Taiwan is used as a case study. For comparison, three long-term operation results of a sole GA search and a simulation based on the reservoir rule curves are compared with that of MIGA. The results demonstrate that MIGA is far more efficient than the sole GA and can successfully and efficiently increase the possibility of achieving an optimal solution. The improvement rate of fitness values increases more than 25%, and the computation time dramatically decreases 80% in a 20-year long-term operation case. The MIGA with the flexibility of decomposition strategies proposed in this study can be effectively and suitably used in long-term reservoir operation or systems with similar conditions.  相似文献   

Cr(VI) Immobilization Process in a Cr‐Spiked Soil by Zerovalent Iron Nanoparticles: Optimization Using Response Surface Methodology     

Leila Alidokht  Ali Reza Khataee  Adel Reyhanitabar  Shahin Oustan 《洁净——土壤、空气、水》2011,39(7):633-640

The response surface methodology involving the five‐level central composite design (CCD) was employed to model and optimize the Cr(VI) immobilization process in a Cr‐spiked soil using starch‐stabilized zerovalent iron nanoparticles (ZVIn). ZVIn were synthesized via a borohydride reduction method and characterized by X‐ray diffraction (XRD) and scanning electron microscopy (SEM). All Cr(VI) immobilization experiments were conducted in a batch system. The variables for the CCD optimization were the ZVIn dosage (% w/w), reaction time (min), and initial Cr(VI) concentration in soil (mg/kg). The predicted response values by the second‐order polynomial model were found to be in good agreement with experimental values (R² = 0.968 and adj‐R² = 0.940). The optimization result showed that the Cr(VI) immobilization efficiency presented the maximal result (90.63%) at the following optimal conditions: ZVIn dosage of 1.5% w/w, reaction time of 60 min, and an initial Cr(VI) concentration of 400 mg/kg.  相似文献   

卫星高光谱数据反演南沙岛礁区海域浅海水深和光学参数     

刘振  胡连波  贺明霞 《中国海洋大学学报(自然科学版)》2014,44(5):101-108

利用卫星高光谱数据反演南海岛礁区浅海地形无疑具有重要意义,它不依赖于常规水深测量数据,可获得较高反演精度,同时可获得海底反射率和海水光学参数。本文利用美国NASA EO-1卫星装载的高光谱成像仪Hyperion数据,以及Z P Lee提出的半分析模型和高光谱优化算法HOPE,反演南沙岛礁海域的浅海水深、海底反射率和固有光学参数。收集了覆盖南沙海域12个岛礁区9幅2007—2011年Hyperion L1数据,以及有关的水深现场测量资料。反演结果以中洲礁为例,0~15m水深范围,平均百分误差为14%,均方根误差为1.53,相关系数为0.96,0~25m水深范围,平均百分误差为15%,均方根误差为2.68,相关系数为0.93。中洲礁,中业岛,信义礁和双黄沙洲4个岛礁区浅海水深反演的平均百分误差为14%。研究结果证明,半分析模型和HOPE算法用于南中国海岛礁区浅海水深及光学参数测量效果良好,并可推广应用于在轨运行的中国HJ-1A卫星HSI高光谱数据及其他将投入运行的卫星高光谱数据。  相似文献   

Seasonal climatologies of oxygen and phosphates in the Bering Sea reconstructed by variational data assimilation approach     

Gleb Panteleev  Vladimir Luchin  Nikolay P. Nezlin  Takashi Kikuchi 《Polar Science》2013,7(3-4):214-232

Climatological fields of dissolved oxygen and phosphates in the Bering Sea during the spring, summer, and fall seasons were generated on the basis of an extensive dataset of hydrochemical observations (16,356 stations, beginning in 1928) and a novel 3D variational algorithm for interpolation of a passive ocean tracer. The resulting patterns comply with maps produced earlier using an optimal interpolation method, though they also provide more detail and contain no “missing data” regions. Vertical, spatial, and temporal variability of both parameters follow large-scale patterns of circulation, upper mixed layer depth, and phytoplankton productivity in the Bering Sea.  相似文献   

Evaluation of polarimetric capabilities of dual polarized Sentinel-1 and TerraSAR-X data to improve the PSInSAR algorithm using amplitude dispersion index optimization     

《International Journal of Applied Earth Observation and Geoinformation》2020

Polarimetric data is an additional source of information in PSI technique to improve its performance in land subsidence estimation. The combination of polarimetric data and radar interferometry can lead to an increase in coherence and the number of PS pixels. In this paper, we evaluated and compared the dual polarized Sentinel-1A (S1A) and TerraSAR-X (TSX) data to improve the PSInSAR algorithm. The improvement of this research is based on minimizing Amplitude Dispersion Index (ADI) by finding the optimum scattering mechanism to increase the number of PSC and PS pixels. The proposed method was tested using a dataset of 40 dual-pol SAR data (VV/VH) acquired by S1A and 20 dual-pol SAR data (HH/VV) acquired by TSX. The results revealed that using the TSX data, the number of PS pixels increased about 3 times in ESPO method than using the conventional channels, e.g., HH, and VV. This increase in S1A data was about 1.7 times in ESPO method. In addition, we investigated the efficiency of the three polarimetric optimization methods i.e. ESPO, BGSM, and Best for the dual polarized S1A and TSX data. Results showed that the PS density increased about 1.9 times in BGSM and about 1.5 times in Best method in TSX data. However, in S1A data, PS density increased about 1.1 times in BGSM. The Best method was not successful in increasing the PS density using the S1A data. Also, the effectiveness of the method was evaluated in urban and non-urban regions. The experimental results showed that the method was successful in significantly increasing the number of final PS pixels in both regions.  相似文献   

Optimization of honeycomb shape for mitigation of flow deficit behind a separation wall     

《Applied Ocean Research》2019

  相似文献