非均匀各向异性储层地震AVAZ响应模拟及分析     

韩旭  郭智奇  徐聪  刘财  刘喜武  刘宇巍 《世界地质》2018,37(2):608-619

基于波动理论的各向异性反射率方法能够充分考虑地震波动力学特征。对单界面理论模型、实际非均匀各向异性模型分别进行正演模拟及分析,比较Ruger理论与反射率方法模拟结果的波动力学特征。结果表明,对于界面模型两种方法均能得到相同的计算结果,但对于实际非均匀各向异性介质,基于Ruger理论的算法受时间采样率的影响,而基于波动理论的反射率方法输入实际空间域模型,计算结果不受时间采样率的限制。  相似文献   

基于岩石圈厚度和地幔横向黏度变化的地幔对流模型重估云南地区剪切波各向异性源的深度     

朱涛  马小溪 《地学前缘》2021,28(2):284-295

在已有模型的基础上,考虑岩石圈厚度和软流层横向黏度的变化,本文建立了更接近地球实际情形的地幔对流模型,然后重新推测了导致云南地区剪切波各向异性的软流层源的深度。结果表明:岩石圈厚度和软流层横向黏度变化对云南地区的软流层各向异性源的深度及软流层的变形程度和机制具有重要影响;软流层各向异性对云南西南部区域、东部区域北纬26°N以南和四川盆地及其西缘的剪切波分裂具有明显的贡献,它们分别位于90~180、170~330和200~320 km深度;在云南西南部区域和东部区域北纬26°N以南,导致剪切波分裂的软流层可能处于大剪切变形状态,主要受地幔流动方向/流动平面模式控制,而四川盆地及其西缘的则处于小剪切变形状态,主要受应变模式的控制。  相似文献   

Cavity expansion in cross‐anisotropic rock     

Dimitrios Kolymbas  Peter Wagner  Anastasia Blioumi 《国际地质力学数值与分析法杂志》2012,36(2):128-139

Schistous rock can be considered—in a first approximation—as cross‐anisotropic linear elastic material. The determination of the corresponding material constants on the basis of the laboratory investigation of rock samples often fails, as the extraction of appropriate cores proves to be unfeasible (the cores disintegrate if the schistosity is pronounced). In this paper a new method is presented to determine the material constants of a linear elastic cross‐anisotropic rock on the basis of cavity expansion field tests, e.g. with a radial jack. To this purpose, an analytic approximation for the deformation of a hydrostatically loaded cylindrical cavity in cross‐anisotropic rock is derived which serves to the inverse analysis of the material parameters. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Description of deformation process in inherently anisotropic granular materials     

S. Pietruszczak  P. Guo 《国际地质力学数值与分析法杂志》2013,37(5):478-490

The main focus in this work is on modeling of mechanical response of granular materials that display inherent anisotropy. Both the experimental and numerical investigations are described. First, the results of direct shear as well as drained/undrained triaxial tests that involve crushed limestone with elongated angular‐shaped particles are reviewed. Afterward, a mathematical framework is presented for modeling of elastic/ inelastic deformation that incorporates the multi‐laminate approach. The deformation is monitored on a set of randomly oriented planes, and the formulation incorporates the thickness of the shear band that is associated with sliding/separation process. A systematic procedure for identification of material functions/ parameters is outlined that is based on the results of direct shear tests, and the framework is later applied to simulate the behavior under triaxial conditions. The results of numerical simulations are compared with the experimental data. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Crustal complexity in the Lachlan Orogen revealed from teleseismic receiver functions     

F. R. FONTAINE  H. TKALCIC  B. L. N. KENNETT 《Australian Journal of Earth Sciences》2013,60(3):413-430

There is an ongoing debate about the tectonic evolution of southeast Australia, particularly about the causes and nature of its accretion to a much older Precambrian core to the west. Seismic imaging of the crust can provide useful clues to address this issue. Seismic tomography imaging is a powerful tool often employed to map elastic properties of the Earth's lithosphere, but in most cases does not constrain well the depth of discontinuities such as the Mohorovi?i? (Moho). In this study, an alternative imaging technique known as receiver function (RF) has been employed for seismic stations near Canberra in the Lachlan Orogen to investigate: (i) the shear-wave-velocity profile in the crust and uppermost mantle, (ii) variations in the Moho depth beneath the Lachlan Orogen, and (iii) the nature of the transition between the crust and mantle. A number of styles of RF analyses were conducted: H-K stacking to obtain the best compressional–shear velocity (V _P /V _S) ratio and crustal thickness; nonlinear inversion for the shear-wave-velocity structure and inversion of the observed variations in RFs with back-azimuth to investigate potential dipping of the crustal layers and anisotropy. The thick crust (up to 48 km) and the mostly intermediate nature of the crust?mantle transition in the Lachlan Orogen could be due to the presence of underplating at the base of the crust, and possibly to the existing thick piles of Ordovician mafic rocks present in the mid and lower crust. Results from numerical modelling of RFs at three seismic stations (CAN, CNB and YNG) suggest that the observed variations with back-azimuth could be related to a complex structure beneath these stations with the likelihood of both a dipping Moho and crustal anisotropy. Our analysis reveals crustal thickening to the west beneath CAN station which could be due to slab convergence. The crustal thickening may also be related to the broad Macquarie volcanic arc, which is rooted to the Moho. The crustal anisotropy may arise from a strong N–S structural trend in the eastern Lachlan Orogen and to the preferred crystallographic orientation of seismically anisotropic minerals in the lower and middle crust related to the paleo-Pacific plate convergence.  相似文献   

THE MEASUREMENT ON VISCOSITY Q VALUE USINGP-WAVE OF LOCAL EARTHQUAKESIN WESTERN YUNNAN PROVINCE 滇西地区近震(?)波的粘性 Q_α值测定     

杜志俊 《地震研究》1989,(1)

本文使用云南滇西地区、红河断裂带北段1984——1985年由PDR-2数字事件记录仪记录到的84张地震记录图,按文献〔4〕中所述的理论和方法,用直达(?)波资料计算了该区的分区粘性多Q_α值,初步结论是:整个场区内介质粘弹性可用非线性体去近似模拟。Q_α值分布情况为:由云龙、洱源、漾濞三点所成的三角区内,其值约为50±30左右较低,而沿弥渡向北,经下关至剑川所示的整个断裂带上所测Q_α值较高,约在160±30左右。反映了明显的构造差异性。  相似文献   

Anisotropy of magnetic susceptibility parameters: Guidelines for their rational selection     

Edgardo Cañón-Tapia 《Pure and Applied Geophysics》1994,142(2):365-382

Twenty-eight parameters used to characterize measurements of the anisotropy of magnetic susceptibility are compared theoretically in this work by introducing the concept of the field of susceptibility tensors, which allows the representation of parameters as families of lines in a plane. It is demonstrated that the foliation and lineation parameters are but a special case of the shape parameters, implying that the resolution of these two rock fabric elements using AMS measurements alone is more an artifact of the numerical range of definition of some parameters than a quantification of two physically independent features. Also, it is shown that parameters presumably of the same type do not necessarily yield equivalent interpretation of results in a qualitative sense, and therefore, caution should be strongly exercised when parameters are to be selected. Paramters quantifying the degree of anisotropy are, in general, equivalent to each other because of the very small departure observed in natural rocks from the isotropic case. However, a final consideration of the possible ability to differentiate rock types and a convenient range of values allowing expression of the degree of anisotropy in a well-defined percentage are pointed out as the main factors to be considered before selecting one parameter within this class.  相似文献   

Calculated and observed seismic behaviour of exposed upper mantle     

Alba Zappone 《Surveys in Geophysics》1994,15(5):619-642

In order to determine the seismic properties of rocks representing the continental crust/upper mantle transition, a structural and petrographical study of peridotites of the Ivrea-Verbano zone (N. Italy) has been undertaken. The seismic behaviour (Vp, Vs, birefringence, orientation of the fast shear-wave polarisation plane) has been calculated from the modal composition of rock samples, together with the crystallographic preferred orientation and the single crystal elastic constants, using the methods of Mainprice (1990). It is shown that the intrinsic anisotropy of peridotites is mainly due to the lattice preferred orientation (LPO) of olivine and to the competing effects due to the LPO of orthopyroxene. If present, well-oriented hydrous phases such as phlogopite, leads to both P- and S-waves velocities becoming drastically reduced, but the anisotropy and the S-wave splitting (mainly on the foliation plane) is increased. An attempt has been made to apply this petrologic and microstructural approach to understand the seismic properties of ultramafic rocks with the aid of a mobile seismic network set up in the Ivrea-Verbano zone. Five recording units with 3-component geophones were installed on the most representative lithologies of the Ivrea-Verbano zone: kinzigites, gabbros, stronalites, and on metapelites of the adjacent outcrop of the Serie dei Laghi. During five months the seismic network recorded 49 events that were mainly regional earthquakes. The preliminary analysis of the first arrival revealed a high-velocity anomaly near the Finero ultramafic massif. Rough calculations indicated that this anomaly could be due to a shallow-depth, peridotitic body about six kilometres thick. S-wave polarisation analysis was carried out on the horizontal components of the seismograms of four regional earthquakes that showed a first arrival propagating almost vertically at the recording sites. Four earthquakes were chosen in order to reconstruct the orientation of the polarisation plane of the shear phases. The preliminary results of this analysis have shown a qualitatively good agreement between the orientation of the polarisation plane of the fast shear-wave and the strike of the foliation at the station near Finero, located on kinzigites of the Ivrea-Verbano zone, although the relationships between the local structural setting and the polarisation orientations at the other recording sites is not yet so clear.  相似文献   

Magnetic pore fabric analysis: a rapid method for estimating permeability anisotropy   总被引：1，自引：0，他引：1  

S. Pfleiderer  H. C. Halls 《Geophysical Journal International》1994,116(1):39-45

  相似文献   

Simplified dynamic and static Green's functions in transversely isotropic media     

Wenjie Dong  Denis P. Schmitt 《Geophysical Journal International》1994,119(1):231-242

  相似文献