相空间中划分大尺度异常雨型的初步研究   总被引：5，自引：2，他引：5  

任宏利  高丽  张培群  李维京 《气象学报》2004,62(4):459-467

文中针对以往雨型研究中的不足 ,从动力学角度将相空间引入到大尺度异常雨型的划分 ,通过估计EOF相平面上的概率密度函数、并确定局部极大值区域来划分主要雨型。分析表明 ,新雨型不仅再现了传统的 3类雨型特征 ,还得到了其他分型 ,并且能够反映出异常降水分布的季节内低频变化 ;分别采用 10和 2 0d低通滤波数据划分的雨型形态比较接近 ,但其种类、持续性和季节内分布等特征存在一定差异 ;雨型的气候分布与季风雨带有一定对应关系 ,其形成与夏季风异常关系密切。通过对简单直观的二维相平面问题的探讨 ,不仅证实了在相空间中划分大尺度雨型的可行性 ,也为进一步在高维空间中讨论雨型问题提供了依据。  相似文献   

叠前深度偏移述评   总被引：4，自引：2，他引：4  

罗银河  刘江平  俞国柱 《物探与化探》2004,28(6):540-545

叠前深度偏移是理想的改善复杂地区和强横向速度变化的地震资料成像技术,笔者就4种典型叠前深度偏移方法的理论基础与技术特点,存在的问题及国内外最新进展进行了讨论.  相似文献   

苏鲁造山带区域地壳山根结构特征   总被引：15，自引：6，他引：15  

徐纪人  赵志新 《岩石学报》2004,20(1):149-156

本利用苏鲁大别造山带及其邻区的三维P波速度资料，详细对比研究了苏鲁与大别超高压变质带莫霍面深度和深部P波速度结构分布特征。结果表明，尽管苏鲁、大别超高压变质带都具有上地壳明显高速且上凸；中地壳增厚；下地壳埋藏较深且下凹等共同的P波速度结构特征，与大别地区相比较，苏鲁超高压变质带还存在着独特的区域性特征。从地貌上看，苏鲁地区山脉已经基本消失。苏鲁超高压变质带的地壳厚度为32～33公里，深于其周围地区2～3公里，但是莫霍面下凹程度远不如大别地区，造山带地壳山根已逐步趋向消失。苏鲁地区上地壳P波速度高于大别，比其周围地区约快1～1．2km/s，有可能显示了该区有更多高速、高密度的超高压变质岩折返到上地壳与地表的岩石物性效果。大别造山带山脉依然存在，莫霍面下凹更明显，沿NWW向串状残留地壳山根最深为37～38公里，深于其周围地区3～4公里。对比研究结果表明，由于区域构造运动的作用，苏鲁大别造山带中的不同地段，在其造山、演化过程中也存在着差别。苏鲁的造山运动起始虽略晚于大别，但结束的更快，比大别更早进入了造山运动的后期。分析促使苏鲁造山运动进程加速的主要构造原因可能有两点，郯庐断裂带的左旋走滑运动以及通过中国华北区域的大范围NW-SE向扩张应力场的影响。大区域构造背景加速了苏鲁造山带地表高山侵蚀过程的同时，随着山根浮力的不断减弱，地壳深部山根逐渐趋向消失。地壳速度结构特征有可能反映了苏鲁造山带的地壳山根随着地表山脉的侵蚀而减弱，趋向消失的过程。  相似文献   

Detection of Methane Hydrate-Bearing Zones from Seismic Data     

Takao Inamori  Masami Hato 《Resource Geology》2004,54(1):99-104

Abstract. The MITI Nankai Trough wells were drilled offshore Japan in the Tokai area in 1999 and 2000. The occurrence of methane hydrate was confirmed by various indicators in the borehole logs and from core data. These findings have a large impact on potential future Japanese energy resources and other related-scientific interests.
We first tried to find the methane hydrate-bearing zones using interval velocities derived from NMO velocity analysis. However, this analysis produced poor resolution. To achieve a more detailed delineation of the gas hydrate- and gas-bearing zones, we executed a seismic impedance inversion calibrated by the logs from two of the MITI Nankai Trough wells. Although these two wells are only about 90 m apart, we were able to produce an impedance section with fine detail by adopting a simple initial model and incorporating physical properties of the methane hydrate-bearing zones. The locations of the methane hydrate-bearing zones are readily apparent in the final section.  相似文献   

静止环境中有阻力圆盘浮力射流特性的研究——(II)流场特性分析          下载免费PDF全文

方神光  槐文信 《水科学进展》2004,(5)

在数值计算成果的基础上,对阻力圆盘浮力射流的流场进行了分析和总结,基于轴线流速的变化规律将盘后流场分为3个区域:回流区、过渡区和自相似区。得到了回流区的长度随弗劳德数F0、孔口直径D/d以及盘离孔口的距离H/d的变化规律,并得到了工况为H/D=1,D/d=2,6和H/D=3,D/d=2在不同弗劳德数F0条件下的横截面上的流速分布和达到自相似区的最小长度;结果表明弗劳德数F0的大小是决定绕流流态的主要因素;同时分析了由正常绕流发展到非正常绕流的压力场变化,发现由于弗劳德数F0的增大而导致流场中出现的第三个负压中心的大小和位置与绕流是否能正常发生存在密切的关系。  相似文献   

Blast Induced Damage and Dynamic Behaviour of Hangingwalls in Bench Stoping     

E. Villaescusa  I. Onederra  C. Scott 《Fragblast: International Journal for Blasting and Fragmentation》2004,8(1):23-40

This paper presents the results of a comprehensive monitoring program designed to investigate the extent of blast induced damage experienced by rock masses extracted by bench stoping methods. An array of triaxial geophones and extensometers were used to monitor blast vibration attenuation and measure hangingwall deformations during stope extraction. In addition, pre and post surveys of the hangingwall rock mass were conducted using a TV borehole camera and cavity survey instrumentation. These surveys were later used to calibrate damage profiles into the stope hangingwalls.

Peak particle velocity, hangingwall deformation measurements and stope surveys were used to develop a site specific damage model that allowed engineers to asses drilling and blasting configurations to minimise the extent of pre-conditioning and damage. In addition the study included the analysis of the frequency response, displacements and accelerations experienced by the excavation as extraction and mine filling progressed. This work aimed at improving our understanding of the influence of blasting on the dynamic behaviour of stope hangingwalls.

The study demonstrated that estimates of the maximum extent of rock mass pre-conditioning and/or damage made through the application of the Holmberg-Persson approach compared well with measured results. In addition, the study found that dynamic loading imparted on an exposed hangingwall from subsequent stope blasting was also expected to contribute to rock mass weakening and that mine filling was crucial to arrest further deterioration. Hangingwall accelerations were used to demonstrate that larger openings may be more susceptible to dynamic loading.  相似文献   

Determination of the elastic modulus set of foliated rocks from ultrasonic velocity measurements   总被引：2，自引：0，他引：2  

Insun Song  Mancheol Suh  Yong-Kyun Woo  Tianyao Hao 《Engineering Geology》2004,72(3-4):293-308

Ultrasonic measurements of compressional and shear wave velocities under hydrostatic pressure up to 70 MPa were carried out on cylindrical specimens cored across and along the foliation planes. Our measurements revealed that the foliation of the metamorphic rocks induces a clear velocity anisotropy between two orthogonal directions; faster along the foliation plane and slower across the plane in most rock types. All velocity components monotonically increase with the confining pressure, probably due to the closure of microcracks distributed in rock specimens. We determined the complete set of dynamic moduli of foliated metamorphic rocks with two assumptions; transverse isotropy due to the foliation and ellipsoidal seismic energy propagation from a point source. The calculated elastic moduli referring to different directions could be valuable for the design of various engineering structures in planar textured rock mass.  相似文献   

描述黄河中下游河道横断面形态的新指标     

孙赞盈  曲少军  苏运启  杨明 《山地学报》2004,22(2):161-164

描述河流横断面的窄深程度,无非是用来衡量它对过流能力和输沙能力的影响大小,及其在河流地貌方面的时空上的调整变化。回顾总结了以往描述横断面形态的常用指标,包括河相系数、宽深比,或湿周与平均水深的比值,指出这几种指标在描述黄河中下游河道时所存在的共同缺点:(1)缺乏物理意义;(2)不能真正代表断面的窄深程度;(3)明显的夸大了宽浅和窄深断面的差别。从表称流量的概念出发,作者认为,应该使用具有明确物理意义的等面积的表称流速来描述断面形态。如果用表称流速来衡量黄河下游河南和山东河道的断面形态的差别,就会发现,断面形态的不同,其对过流能力的影响不过1:2,远不象河相系数和宽深比所描述的达到1:6甚至1:11那样的悬殊程度;黄河下游河道主槽“多来多排”的主要影响因素是表称流速。  相似文献   

Three-dimensional wave propagation in a general anisotropic poroelastic medium: phase velocity, group velocity and polarization   总被引：2，自引：0，他引：2  

M. D. Sharma 《Geophysical Journal International》2004,156(2):329-344

  相似文献   

Splash-saltation trajectories of soil particles under wind-driven rain     

G. Erpul  L. D. Norton  D. Gabriels 《Geomorphology》2004,59(1-4):31

It is usually recognized that relatively large amounts of soil particles cannot be transported by raindrop splashes under windless rain. However, the splash-saltation process can cause net transportation in the prevailing wind direction since variations in splash-saltation trajectory due to the wind are expected in wind-driven rain. Therefore, determining the combined effect of rain and wind on the process should enable improvement of the estimation of erosion for any given prediction technique. This paper presents experimental data on the effects of slope aspect, slope gradient, and horizontal wind velocity on the splash-saltation trajectories of soil particles under wind-driven rain. In a wind tunnel facility equipped with a rainfall simulator, the rains driven by horizontal wind velocities of 6, 10, and 14 m s⁻¹ were allowed to impact three agricultural soils packed into 20×55 cm soil pans placed at both windward and leeward slopes of 7%, 15%, and 20%. Splash-saltation trajectories were measured by trapping the splashed particles at distances downwind on a 7-m uniform slope segment in the upslope and downslope directions, respectively, for windward and leeward slopes. Exponential decay curves were fitted for the mass distribution of splash-saltation sediment as a function of travel distance, and the average splash-saltation trajectory was derived from the average value of the fitted functions. The results demonstrated that the average trajectory of a raindrop-induced and wind-driven soil particle was substantially affected by the wind shear velocity, and it had the greatest correlation (r=0.96 for all data) with the shear velocity; however, neither slope aspect nor slope gradient significantly predicted the splash-saltation trajectory. More significantly, a statistical analysis conducted with nonlinear regression model of C₁(u_*²/g) showed that average trajectory of splash saltation was approximately three times greater than that of typical saltating sand grain.  相似文献