Theoretical aspects of cap-rock and fault seals for single- and two-phase hydrocarbon columns   总被引：6，自引：0，他引：6  

N.L. Watts   《Marine and Petroleum Geology》1987,4(4)

Cap-rock seals can be divided genetically into those that fail by capillary leakage (membrane seals) and those whose capillary entry pressures are so high that seal failure preferentially occurs by fracturing and/or wedging open of faults (hydraulic seals). A given membrane seal can trap a larger oil column than gas column at shallow depths, but below a critical depth (interval), gas is more easily sealed than oil. This critical depth increases with lower API gravity, lower oil GOR and overpressured conditions (for the gas phase). These observations arise from a series of modelling studies of membrane sealing and can be conveniently represented using pressure/ depth (P/D) profiles through sealed hydrocarbon columns. P/D diagrams have been applied to the more complex situation of the membrane sealing of a gas cap underlain by an oil rim; at seal capacity, such a two-phase column will be always greater than if only oil or gas occurs below the seal.These conclusions contrast with those for hydraulic seals where the seal capacity to oil always exceeds that for gas. Moreover, a trapped two-phase column, at hydraulic seal capacity will be less than the maximum-allowed oil-only column, but more than the maximum gas-only column. Unlike membrane seals, hydraulic seal capacity should be directly related to cap-rock thickness, in addition to the magnitude of the minimum effective stress in the sealing layer and the degree of overpressure development in the sequence as a whole.Fault-related seals are effectively analogous to membrane cap-rocks which have been tilted to the angle of the fault plane. Consequently, all of the above conclusions derived for membrane cap-rocks apply to both sealing faults sensu stricto (fault plane itself seals) and juxtaposition faults (hydrocarbon trapped laterally against a juxtaposed sealing unit). The maximum-allowed two-phase column trapped by a sealing fault is greater than for equivalent oil-only and gas-only columns, but less than that predicted for a horizontal membrane cap-rock under similar conditions. Where a two-phase column is present on both sides of a sealing fault (which is at two-phase seal capacity), a deeper oil/water contact (OWC) in one fault block is associated with a deeper gas/oil contact (GOC) compared with the adjacent fault block. If the fault seal is discontinuous in the gas leg, however, the deeper OWC is accompanied by a shallower GOC, whereas a break in the fault seal in the oil leg results in a common OWC in both fault blocks, even though separate GOC's exist. Schematic P/D profiles are provided for each of the above situations from which a series of fundamental equations governing single- and two-phase cap-rock and fault seal capacities can be derived. These relationships may have significant implications for exploration prospect appraisal exercises where more meaningful estimates of differential seal capacities can be made.The membrane sealing theory developed herein assumes that all reservoirs and seals are water-wet and no hydrodynamic flow exists. The conclusions on membrane seal capacity place constraints on the migration efficiency of gas along low-permeabiligy paths at depth where fracturing, wedging open of faults and/or diffusion process may be more important. Contrary to previous assertions, it is speculated that leakage of hydrocarbons through membrane seals occurs in distinct pulses such that the seal is at or near the theoretically calculated seal capacity, once this has been initially attained.Finally, the developed seal theory and P/D profile concepts are applied to a series of development geological problems including the effects of differential depletion, and degree of aquifer support, on sealing fault leakage, and the evaluation of barriers to vertical cross-flow using RFT profiles through depleted reservoirs. It is shown that imbibition processes and dynamic effects related to active cross-flow across such barriers often preclude quantitative analysis and solution of these problems for which simulation studies are usually required.  相似文献   

鲜水河断裂带炉霍段的水平运动及地震的重复性研究   总被引：5，自引：0，他引：5       下载免费PDF全文

杜其方 《地震地质》1989,11(4):31-42

本文讨论了鲜水河活动断裂带炉霍段的水平断错、古地震遗迹与地震重复间隔等问题。晚更新世以来断裂的平均滑动速率为13毫米/年。全新世中期以来大震的重复间隔时间小于600年  相似文献   

滇西地区地壳上地幔电性结构与地壳构造活动的关系   总被引：46，自引：3，他引：43       下载免费PDF全文

孙洁  徐常芳 《地震地质》1989,11(1):35-45

本文根据滇西地区18个大地电磁测深点资料的数据处理和分析结果,对测区深部导电率在纵、横向上的变化特征进行了研究。结果表明:滇西地区深部电性为多层结构,大致可分四至五个电性结构层;深部电性结构横向变化大,明显受区域构造控制;该区上部地壳内普遍存在低阻层;上地幔高导层明显存在两个隆起区,一个以剑川—鹤庆为中心呈北北西向展布的隆起区,另一个以腾冲—潞西为轴呈南北向展布的隆起区。 本文还讨论了地壳上地幔电性结构与大地构造的关系,滇西北裂陷区盆地的形成,以及该区地震活动与深部构造的关系  相似文献   

Fault Characteristics in Longmen Mountain Thrust Belt,Western Sichuan Foreland Basin,China   总被引：1，自引：0，他引：1  

万桂梅  汤良杰  杨克明  金文正  吕志洲  余一欣 《中国地质大学学报(英文版)》2008,19(6):611-624

Through field geological survey,the authors found that abundant thrust faults developed in the Longmen (龙门) Mountain thrust belt.These faults can be divided into thrust faults and strike-slip faults according to their formation mechanisms and characteristics.Furthermore,these faults can be graded into primary fault,secondary fault,third-level fault,and fourth-level fault according to their scale and role in the tectonic evolution of Longmen Mountain thrust belt.Each thrust fault is composed of several secondary faults,such as Qingchuan (青川)-Maowen (茂汶) fault zone is composed of Qiaozhuang (乔庄) fault,Qingxi (青溪) fault,Maowen fault,Ganyanggou (赶羊沟) fault,etc..The Longmen Mountain thrust belt experienced early Indosinian movement,Anxian (安县) movement,Yanshan (燕山)movement,and Himalayan movement,and the faults formed gradually from north to south.  相似文献   

断层垂向封闭性定量研究方法及其在准噶尔盆地白家海凸起东道海子断裂带应用   总被引：2，自引：0，他引：2  

梁全胜  刘震  何小胡  王德杰  王晓东 《现代地质》2008,22(5)

断层的垂向封闭能力主要取决于断面的紧闭程度和断裂带内填充物的岩性。在定量计算断面正压力和断层两侧地层泥地比的基础上,提出了断层垂向封闭因子(Fvs)的概念,并将其定义为断面正压力与断层两侧地层泥地比的乘积。通过该参数可以定量评价断层的垂向封闭能力。以准噶尔盆地东道海子断裂为例,在建立断层垂向封油、气能力评价标准的基础上,应用断层垂向封闭因子(Fvs)定量评价了该断裂带的成藏期垂向封闭性及现今垂向封闭性,分析了该断裂带对油气成藏的控制作用,得到较好效果。  相似文献   

松辽盆地葡萄花油田北部鞍部地区成藏控制因素分析   总被引：2，自引：2，他引：0  

张文起  车廷信  王长生  王李郑 《现代地质》2008,22(4)

在系统描述葡萄花油田北部鞍部地区构造特征和断裂体系的基础上,分析了烃源岩大量排烃期与构造形成时期的匹配关系、砂体分布、地层压力和断层封闭性对研究区成藏的控制作用。研究结果表明:烃源岩大量排烃期和构造形成时期良好匹配,地层压力低势区和在成藏时期断块边界断层侧向开启是成藏的有利条件,构造和砂体分布则是成藏的主要控制因素。研究区成藏条件较好,可作为有利扩边潜力区。  相似文献   

Application of Spectral Decomposition to Detection of Fracture-Cavity Carbonate Reservoir Beds in the Tahe Oiifieid, Tarim Basin, NW China     

Liu Xiaoping  Yang Xiaolan  Zhang Yazhong  Han Long 《《地质学报》英文版》2008,82(3):530-536

Ordovician fracture-cavity carbonate reservoir beds are the major type of producing formations in the Tahe oilfield, Tarim Basin. The seismic responses of these beds clearly changes depending on the different distance of the fracture-cavity reservoir bed from the top of the section. The seismic reflection becomes weak or is absent when the fracture-cavity reservoir beds are less than 20 ms below the top Ordovician. The effect on top Ordovician reflection became weaker with deeper burial of fracture-cavity reservoir beds but the developed deep fracture-cavity reservoir beds caused stronger reflection in the interior of the Ordovician. This interior reflection can be divided into strong long-axis, irregular and bead string reflections, and was present 80 ms below the top Ordovician. Aimed at understanding reflection characteristics, the spectral decomposition technique, which uses frequency to ＂tune-in＂ bed thickness, was used to predict Ordovician fracture-cavity carbonate formations in the Tahe oilfield. Through finely adjusting the processing parameters of spectral decomposition, it was found that the slice at 30 Hz of the tuned data cube can best represent reservoir bed development. Two large N-S-trending strong reflection belts in the mid-western part of the study area along wells TK440- TK427-TK417B and in the eastern part along wells TK404-TK409 were observed distinctly on the 30 Hz slice and 4-D time-frequency data cube carving. A small N-S trending reflection belt in the southern part along wells T403-TK446B was also clearly identified. The predicted reservoir bed development area coincides with the fracture-cavities connection area confirmed by drilling pressure testing results. Deep karst cavities occur basically in three reservoir bed-development belts identified by the Ordovician interior strong reflection. Spectral decomposition proved to be a useful technique in identifying fracture-cavity reservoir beds.  相似文献   

胶南晚中生代大珠花岗岩岩体的脆性变形机制   总被引：1，自引：0，他引：1  

田野  单业华 《大地构造与成矿学》2008,32(4)

在长期变化的构造应力作用下,胶南大珠山花岗岩岩体自早白垩世冷凝冷却以来发生强烈的脆性破裂变形,形成了多样的破裂类型如岩脉、节理和断层。在该岩体冷凝冷却早期侵入的细晶花岗岩脉和稍后形成的N-S向节理组反映出与同期区域构造应力场协调的N-S向挤压作用,而后伴随着揭顶剥蚀,出现了交替变化的构造应力场形成了岩体内主导的NW-NNW向和NE向节理组。整体上,恢复出的岩体内构造应力场发生顺时针方向旋转,最大水平挤压由早期的N-S向偏转为晚期的近E-W向。构造应力场的长期变化、平行节理作用和节理断层化作用造成了研究区复杂的破裂型式和破裂序列。  相似文献   

多源遥感数据综合解译鄂尔多斯盆地杭锦旗地区地质构造   总被引：1，自引：0，他引：1  

颜蕊  张景发  姜文亮  焦孟梅 《国土资源遥感》2008,(2):88-92

利用多源遥感数据假彩色合成、融合及纹理分析等增强处理方法提取研究区构造信息,进而对研究区进行综合解译;通过分析水系、色调、纹理、地貌及岩性等特征,判断出杭锦旗地区存在一小一大、内外相套的2个环形构造,发育的北西向、北东向2组共轭断层和一组北北西向断层,与环形构造相互构架,构成研究区特殊的构造体系。经分析预测,这些构造是受周边南北向构造应力共同挤压而形成。  相似文献   

郯庐断裂带张八岭隆起北段的左旋走滑挤压变形及其~(40)Ar/~(39)Ar定年   总被引：4，自引：0，他引：4  

张青  朱光  刘国生  C.Teyssier  W.J.Dunlap 《地学前缘》2008,15(3):234-249

郯庐断裂带张八岭隆起北段,自西向东分别出露北北东向的韧性滑脱变形带、脆-韧性过渡带和脆性的前陆褶断带。韧性滑脱变形带内的张八岭群片岩,广泛发生了低绿片相背景下的糜棱岩化。其中呈现为平缓的糜棱面理和近南北向的矿物拉伸线理。显微构造及石英C轴组构分析显示,该韧性滑脱带一致为上盘向南的运动。该带以东依次变为上盘向南南东→南东的逆冲活动,总体上为左旋走滑挤压变形带。张八岭群所在的韧性变形带为深部陡立走滑构造与浅部脆性构造之间的滑脱变形带,其间的差异走滑变形,造成了该滑脱层在总体向北运动中出现上盘向南的剪切变形。对6处张八岭群片岩中15个不同粒级白云母的40Ar/39Ar定年指示,变形发生在(236.2±0.5)~(238.0±0.4)Ma的中三叠世晚期。这表明郯庐断裂带的左行平移发生在华北与华南板块碰撞的深俯冲阶段,起源于陆内转换断层。  相似文献