Climatic forcing on hydrography of a Mediterranean bay (Alfacs Bay)     

Jordi Sol  Antonio Turiel  Marta Estrada  Clara Llebot  Dolors Blasco  Jordi Camp  Maximino Delgado  Margarita Fernndez-Tejedor  Jorge Diogne 《Continental Shelf Research》2009,29(15):1786-1800

Time series of meteorological and hydrographic variables were analyzed using Huang's Empirical Mode Decomposition (EMD) to ascertain the relationships among climatic forcings and the hydrographic behavior in an estuarine bay. The EMD method allowed us to separate the different characteristic oscillation patterns (or modes) of a 14 year-long time series of weekly hydrographic (water temperature and salinity) and meteorological (air temperature, pressure, wind and precipitation) data from Alfacs Bay (Ebre delta, NW Mediterranean). In order to explore the relations between couples of oscillation modes from different series, we developed a correlation index based on the phase differences between these modes. Common characteristic modes in the studied series are a seasonal pattern and an inter-annual oscillation. The comparison between series of meteorological and hydrographic variables shows significant correlations of two modes (of 1 year and 2–3 year periods, respectively) of water temperature with the corresponding two modes of air temperature and air pressure. There were also significant positive correlations between wind speed and water temperature. The use of EMD allowed to discover a strong connection between stratification and the use of irrigation channels in the bay; in addition, with the help of this method we can propose a common meteorological forcing mechanism for the observed patterns of variability. Those findings would have been impossible to guess by use of classical Fourier methods, and gives a demonstration of the power of EMD in climatic series analysis.  相似文献   

用于雷达天文研究的高速基带数据记录系统          下载免费PDF全文

安秀梅  陈卯蒸  裴鑫  李健  段雪峰  托乎提努尔 《天文学报》2021,62(5):51

为了开展雷达天文科学研究, 将射电望远镜接收的雷达回波信号进行采集和记录, 研究基于SNAP (Smart Network ADC (Analog to Digital Converter) Processor)硬件实验板和快速存储服务器设计并开发了雷达天文基带数据采集与记录系统. 该系统采用CASPER (Collaboration for Astronomy Signal Processing and Electronics Research)提供的图形化FPGA (Field Programmable Gate Array)开发工具流, 设计了双通道、256MHz带宽信号采集和VDIF (VLBI (Very Long Baseline Interferometry) Data Interchange Format)基带数据输出固件程序; 基于HASHPIPE (High Availability SHared PIPeline Engine)多线程管理引擎开发了双万兆以太网口实时基带数据存储程序, 存储带宽达到1GB/s; 最后编写了VDIF格式到雷达天文格式的转换程序. 经过脉冲星信号观测实验检测, 该系统准确、可靠.  相似文献   

实时定标微波辐射计的仿真研究   总被引：3，自引：0，他引：3  

高飞  张俊荣 《遥感学报》1999,3(1):3-8

实时定标微波辐射计是一种新体制的微波辐射计,它能有效地消除系统增益波动和有效本机噪声波动的影响,适合星载应用。对以全功率微波辐射计为基础的实时定标微波辐射计进行了仿真研究,建立了系统各环节的仿真模型。在仿真试验中,采用了快速离散傅里叶变换处理信号,分析并缓解了由于频程跨度大带来的频率分辨率与采样点数之间的矛盾。仿真结果为优化设计提供了重要参考,并证明所建模型准确、有效,也为进一步实现星载环境仿真调试奠定了基础。  相似文献   

Separation of shoreline change signal from random noise     

Todd L. Walton Jr 《Ocean Engineering》2000,27(1):1811

Investigation of shoreline change signals in the presence of possible non-stationarity is attempted via Karhunen–Loeve filtering to separate the actual shoreline signal change from that of random noise. Interpretation is made of the signal and noise normalized covariance and spectra to help in delineating natural change versus man-made change patterns for a section of shoreline where a navigation channel existed over a portion of the shoreline history.  相似文献   

星载海洋高度计海面回波信号的统计特性分析     

吴晓辉  张晓辉 《海洋技术学报》2005,24(3):10-13,21

论文首先从理论上简要阐述了星载海洋高度计海面回波的散射机理和回波信号后向散射模型;其后,利用Matlab数学工具,通过对我国＂神州四号＂飞船下传的大量高度计观测数据进行IQ采样数据提取、数据处理以及统计分析,进行了星载海洋高度计海面回波信号的统计特性分析与研究.  相似文献   

崇明异常电磁扰动与台湾7.5 级强震   总被引：3，自引：0，他引：3  

马钦忠  尹京苑  顾学章 《地震》2003,23(4):49-56

2002 年3 月31 日14 时52 分在台湾以东海中发生7.5 级强地震, 地震发生前后上海市地震局崇明地震台电磁波仪器记录到了一系列强烈电磁辐射异常信息, 其中震前最早的信息出现在24 天前, 最迟的信息出现在震前5 小时且幅度最大。主震发生前电磁辐射异常信号的振荡幅度随着主震临近而增大, 主震发生后又降了下来。余震期间的电磁辐射异常信息也十分丰富。文中探讨了这些电磁辐射异常信号与强震之间的关系, 结合多种震例的记录认为这类震前电磁辐射异常信号可作为临震前的一种信息。为认识和丰富震前电磁辐射前兆异常的现象与研究增加了新的内容。  相似文献   

华北地震活动中短期异常图像研究   总被引：2，自引：0，他引：2  

陈佩燕  王林瑛  刘蒲雄  王俊国 《地震》2005,25(1):22-30

系统研究了多种地震活动性方法后认为, 1970年以来华北地区发生的M_S≥5.8中强震前, 约83%具有3级或4级地震异常条带、 孕震空区及信号震出现。 震前有信号震的比例占92%, 83%的信号震距主震150 km以内, 距主震发生时间小于1年的占67%。 条带时间形成进程在2年内的约占90%, 震前条带形成后到主震发生83%在5个月内。 空区形成进程在1年半内的占83%, 空区形成后到主震发生91%在50天内, 为有意义的地震活动图像短期异常特征。 文中还探讨了异常条带图像的定量判别指标及其与未来强震的关联。  相似文献   

宁夏及邻区M_S≥5.0地震的前震和广义前震特征分析     

任雪梅  焦德成  蔡新华 《中国地震》2017,33(1):91-100

通过对宁夏及邻区1970~2015年14次M_S≥5.0地震前的中短期弱震的时空分布特征进行分析,总结了该区域M_S≥5.0地震的前震、广义前震特征,具体研究了空区、条带、信号地震和前兆地震等的时空特征,分析了各种异常的地震预测指示意义,并给出了宁夏及邻区直接前震的识别与判定标准。此外,还分析了内蒙古1976年9月23日巴音木仁M_S6.2地震前与2015年4月15日阿拉善左旗M_S5.8地震前弱震活动特征间的差异。  相似文献   

How rough sea affects marine seismic data and deghosting procedures          下载免费PDF全文

Anton Egorov  Stanislav Glubokovskikh  Andrej Bóna  Roman Pevzner  Boris Gurevich  Mikhail Tokarev 《Geophysical Prospecting》2018,66(1):3-12

Most seismic processing algorithms generally consider the sea surface as a flat reflector. However, acquisition of marine seismic data often takes place in weather conditions where this approximation is inaccurate. The distortion in the seismic wavelet introduced by the rough sea may influence (for example) deghosting results, as deghosting operators are typically recursive and sensitive to the changes in the seismic signal. In this paper, we study the effect of sea surface roughness on conventional (5–160 Hz) and ultra‐high‐resolution (200–3500 Hz) single‐component towed‐streamer data. To this end, we numerically simulate reflections from a rough sea surface using the Kirchhoff approximation. Our modelling demonstrates that for conventional seismic frequency band sea roughness can distort results of standard one‐dimensional and two‐dimensional deterministic deghosting. To mitigate this effect, we introduce regularisation and optimisation based on the minimum‐energy criterion and show that this improves the processing output significantly. Analysis of ultra‐high‐resolution field data in conjunction with modelling shows that even relatively calm sea state (i.e., 15 cm wave height) introduces significant changes in the seismic signal for ultra‐high‐frequency band. These changes in amplitude and arrival time may degrade the results of deghosting. Using the field dataset, we show how the minimum‐energy optimisation of deghosting parameters improves the processing result.  相似文献   

Effects of metallic system components on marine electromagnetic loop data     

Konstantin Reeck  Hendrik Müller  Sebastian Hölz  Amir Haroon  Katrin Schwalenberg  Marion Jegen 《Geophysical Prospecting》2020,68(7):2254-2270

Electromagnetic loop systems rely on the use of non-conductive materials near the sensor to minimize bias effects superimposed on measured data. For marine sensors, rigidity, compactness and ease of platform handling are essential. Thus, commonly a compromise between rigid, cost-effective and non-conductive materials (e.g. stainless steel versus fibreglass composites) needs to be found. For systems dedicated to controlled-source electromagnetic measurements, a spatial separation between critical system components and sensors may be feasible, whereas compact multi-sensor platforms, remotely operated vehicles and autonomous unmanned vehicles require the use of electrically conductive components near the sensor. While data analysis and geological interpretations benefit vastly from each added instrument and multidisciplinary approaches, this introduces a systematic and platform-immanent bias in the measured electromagnetic data. In this scope, we present two comparable case studies targeting loop-source electromagnetic applications in both time and frequency domains: the time-domain system trades the compact design for a clear separation of 15 m between an upper fibreglass frame, holding most critical titanium system components, and a lower frame with its coil and receivers. In case of the frequency-domain profiler, the compact and rigid design is achieved by a circular fibreglass platform, carrying the transmitting and receiving coils, as well as several titanium housings and instruments. In this study, we analyse and quantify the quasi-static influence of conductive objects on time- and frequency-domain coil systems by applying an analytically and experimentally verified 3D finite element model. Moreover, we present calibration and optimization procedures to minimize bias inherent in the measured data. The numerical experiments do not only show the significance of the bias on the inversion results, but also the efficiency of a system calibration against the analytically calculated response of a known environment. The remaining bias after calibration is a time/frequency-dependent function of seafloor conductivity, which doubles the commonly estimated noise floor from 1% to 2%, decreasing the sensitivity and resolution of the devices. By optimizing size and position of critical conductive system components (e.g. titanium housings) and/or modifying the transmitter/receiver geometry, we significantly reduce the effect of this residual bias on the inversion results as demonstrated by 3D modelling. These procedures motivate the opportunity to design dedicated, compact, low-bias platforms and provide a solution for autonomous and remotely steered designs by minimizing their effect on the sensitivity of the controlled-source electromagnetic sensor.  相似文献