量子退火最优化与地球物理反演方法   总被引：1，自引：1，他引：1       下载免费PDF全文

魏超  李小凡  张美根 《地球物理学进展》2007,22(3):779-785

量子退火最优化方法的思想是基于模拟退火方法发展而来的，但利用的是量子跃迁隧道效应的机制，这和模拟退火基于热力学的退火原理是不一样的.本文首先概述了量子退火和模拟退火的区别所在；其次主要论述了量子退火在最优化方面的应用发展情况，比如伊辛自旋玻璃问题，旅行商问题，布尔可满足性问题等，讨论了具体测试问题中量子退火方法的应用情况以及和模拟退火方法的比较；随后对基于量子退火方法的地球物理反演原理和方法做了相应的阐述，讨论了不同参数比如温度、横向场的设置，比较了处于不同的横向场和势能状态的概率大小问题；最后就量子退火方法在地球物理反问体中的应用前景以及存在的问题做了简要概述.  相似文献   

Modeling errors in upward continuation for INS gravity compensation     

Christopher Jekeli  Jong-Ki Lee  Jay H. Kwon 《Journal of Geodesy》2007,81(5):297-309

Accurate upward continuation of gravity anomalies supports future precision, free-inertial navigation systems, since the latter cannot by themselves sense the gravitational field and thus require appropriate gravity compensation. This compensation is in the form of horizontal gravity components. An analysis of the model errors in upward continuation using derivatives of the standard Pizzetti integral solution (spherical approximation) shows that discretization of the data and truncation of the integral are the major sources of error in the predicted horizontal components of the gravity disturbance. The irregular shape of the data boundary, even the relatively rough topography of a simulated mountainous region, has only secondary effect, except when the data resolution is very high (small discretization error). Other errors due to spherical approximation are even less important. The analysis excluded all measurement errors in the gravity anomaly data in order to quantify just the model errors. Based on a consistent gravity field/topographic surface simulation, upward continuation errors in the derivatives of the Pizzetti integral to mean altitudes of about 3,000 and 1,500 m above the mean surface ranged from less than 1 mGal (standard deviation) to less than 2 mGal (standard deviation), respectively, in the case of 2 arcmin data resolution. Least-squares collocation performs better than this, but may require significantly greater computational resources.  相似文献   

坡面溅蚀发生过程及其与坡度关系的模拟研究   总被引：11，自引：0，他引：11  

张科利  细山田健 《地理科学》1998,18(6):561-566

通过人工模拟降雨试验,分别观测降雨过程中不同方向上溅蚀强度的变化,根据各影响因子间相互消长及相互制约的关系特点,分析了雨滴溅蚀发生的过程特征及其变化原因,从溅蚀过程的变化特点及溅蚀强度的变化规律比较,定量地探讨了坡度对雨滴击溅侵蚀的影响作用,得出了溅蚀强度与坡度因子之间的关系方程。  相似文献   

Electrodynamic Disaggregation: Does it Affect Apatite Fission-Track and (U-Th)/He Analyses?     

Jörg Giese  Diane Seward  Finlay M. Stuart  Eliane Wüthrich  Edwin Gnos  Daniel Kurz  Urs Eggenberger  Guido Schreurs 《Geostandards and Geoanalytical Research》2010,34(1):39-48

Apatite fission-track and (U-Th)/He analyses require the liberation of intact idiomorphic apatite grains from rock samples. While routinely being carried out by mechanical methods, electrodynamic disaggregation (ED) offers an alternative approach. The high-voltage discharges produced during the ED process create localised temperature peaks (10000 K) along a narrow plasma channel. In apatite, such high temperatures could potentially reduce the length of fission tracks, which start to anneal at temperatures > 60 °C, and could also enhance He diffusion, which becomes significant at 30–40 °C over geological time scales. A comparison of fission-track analyses and (U-Th)/He ages of apatites prepared both by mechanical (jaw crusher, disk mill) and ED processing provides a way of determining whether heating during the latter method has any significant effect. Apatites from three samples of different geological settings (an orthogneiss from Madagascar, the Fish Canyon Tuff, and a muscovite-gneiss from Greece) yielded statistically identical track length distributions compared to samples prepared mechanically. Additionally, (U-Th)/He ages of apatites from a leucogranite from Morocco prepared by both methods were indistinguishable. These first results indicated that during electrodynamic disaggregation apatite crystals were not heated enough to partially anneal the fission tracks or induce significant diffusive loss of He.  相似文献   

网袖扭转及其排除的模拟试验     

卢孝坚 《广东海洋大学学报》1991,(2)

网袖扭转是单拖渔轮用网囊引纲船舷一侧起网时有发生的现象。本模拟试验,可清楚地观察到网袖扭转的角度、方向,从而采取安全、简便快捷的方法排除。操作:面向船尾,右舷收网的顺时针方向扭转一周,左舷收网的逆时针方向扭转一周,排除时连接着网囊引纲一侧的网袖和混含纲保持不动,解开连接另一网袖叉纲一端的混合纲,顺其向绕另一混合纲一周并接回原处,网袖扭转便排除。  相似文献   

锆石辐射损伤测年方法研究进展与应用     

范明璞  柳小明  孙圣思 《地质论评》2022,68(5):2022102003-2022102003

锆石辐射损伤测年是一种新兴的低温热年代学方法（封闭温度为~230 ± 25 ℃）,其原理是依据拉曼半高宽（ν3）计算出锆石所累积的α通量,结合U、Th含量,得出锆石辐射损伤的累积时间,即锆石辐射损伤年龄。相较于其他低温年代学方法,锆石辐射损伤测年具有测试简便、高效、低成本、双（多）定年等优势,在地学研究中展现出广泛的应用前景,现已成功应用于示踪物源区和揭示岩体热事件等领域。然而,该方法尚存几个关键问题有待解决,例如,微区测试的空间不匹配性、封闭温度存有争议、较大的年龄偏差等,这无疑阻碍其在地球科学领域中更进一步的推广和应用。本文系统地介绍了锆石辐射损伤测年方法的起源、原理和测试方法,总结了相关应用的重要进展,阐述了锆石辐射损伤测年方法的尚存问题,并对该方法的发展趋势作以展望,以期为年代学的发展提供新的技术手段。  相似文献   

模拟退火机制下优化离散粒子群的端元提取算法     

刘飞  杨可明  魏华锋  孙阳阳  史钢强 《测绘与空间地理信息》2015,(7):37-40

针对离散粒子群优化(Discrete Particle Swarm Optimization,DPSO)端元提取算法初始种群质量差、收敛性能低且易于陷入局部最优,本文将模拟退火算法引入到DPSO的不同阶段,模拟退火算法能以一定的概率接受和舍弃新状态,使种群内粒子渐趋有序、达到平衡,收敛到全局最优,有效避免了搜索陷入局部最优。因此,该算法不仅保持了DPSO的全局组合优化特点,克服了初始种群质量差、易陷入局部最优等缺点,而且还提高了收敛速度和端元提取精度。  相似文献   

位错模式反演的算法研究   总被引：1，自引：0，他引：1  

李爽  许才军  王新洲 《大地测量与地球动力学》2003,23(1):53-57

综述了大地测量反演算法的发展状况，详细介绍了模拟退火，随机耗费和区间算法等3种优化方法，并基于位错模式，采用模拟的重力测量观测数据，比较了3种算法的反演效果，结果表明：模拟退火法优于随机耗费法，而区间算法的可靠性又优于模拟退火法，区间算法是最可靠的反演方法。  相似文献   

Magnetotelluric appraisal using simulated annealing   总被引：1，自引：0，他引：1  

S. E. Dosso  D. W. Oldenburg 《Geophysical Journal International》1991,106(2):379-385

  相似文献   

The thermal evolution of Corsica as recorded by zircon fission-tracks   总被引：1，自引：0，他引：1  

M. Giuditta Fellin  Joseph A. Vance  John I. Garver  Massimiliano Zattin 《Tectonophysics》2006,421(3-4):299-317

New zircon fission-track (ZFT) ages from Corsica record multiple thermal events that can be tied to the structural evolution of the western Mediterranean region. The Corsican zircons have a wide scatter of ZFT grain ages (243–14 Ma), which together define several age domains. Western Corsica consists largely of stable Hercynian basement characterized by ZFT ages in the range 161–114 Ma. We interpret these ages (Late Jurassic–Early Cretaceous) as the product of a long-lived Tethyan thermal event related to continental rifting and subsequent drifting during the separation of the European and African plates and the formation of the Liguro–Piemontese ocean basin. In contrast to Hercynian Corsica, Alpine Corsica (northeast Corsica) experienced widespread deformation and metamorphism in Late Cretaceous(?)–Tertiary time. Dated samples from Alpine Corsica range in age from 112 to 19 Ma and all are reset or partially reset by one or more Alpine thermal events. The youngest ZFT grain ages are from the northernmost Alpine Corsica and define an age population at  24 Ma that indicates cooling after Tertiary thermal events associated with the Alpine metamorphism and the opening of the Liguro–Provençal basin. A less well-defined ZFT age population at  72 Ma is present in both Alpine Corsica and Hercynian basement rocks. The thermal history of these rocks is not clear. One interpretation is that the ZFT population at  72 Ma reflects resetting during a Late Cretaceous event broadly synchronous with the early Alpine metamorphism. Another interpretation is that this peak is related to variable fission-track annealing and partial resetting during the Tertiary Alpine metamorphic event across central to north-eastern Corsica. This partial age resetting supports the presence of a fossil ZFT partial annealing zone and limits the peak temperature in this area below 300 °C, for both the affected pre-Alpine and Alpine units.  相似文献