Architecture of fault zones determined from outcrop, cores, 3-D seismic tomography and geostatistical modeling: example from the Albalá Granitic Pluton, SW Iberian Variscan Massif     

J. Escuder Viruete  R. Carbonell  D. Martí  M. J. Jurado  A. Prez-Estaún 《Tectonophysics》2003,361(1-2):97-120

The 3-D seismic tomographic data are used together with field, core and well log structural information to determine the detailed 3-D architecture of fault zones in a granitic massif of volume 500×575×168 m at Mina Ratones area in the Albalá Granitic Pluton. To facilitate the integration of the different data, geostatistical simulation algorithms are applied to interpolate the relatively sparse structural (hard) control data conditioned to abundant but indirect 3-D (soft) seismic tomographic data. To effectively integrate geologic and tomographic data, 3-D migration of the velocity model from the time domain into the depth domain was essential. The resulting 3-D model constitutes an image of the fault zone architecture within the granitic massif that honours hard and soft data and provides an evaluation of the spatial variability of structural heterogeneities based on the computation of 3-D experimental variograms of Fracture Index (fault intensity) data. This probabilistic quantitative 3-D model of spatially heterogeneous fault zones is suitable for subsequent fluid flow simulations. The modeled image of the 3-D fault distribution is consistent with the fault architecture in the Mina Ratones area, which basically consists of two families of subvertical structures with NNE–SSW and ENE–WSW trends that displaces the surfaces of low-angle faults (North Fault) and follows their seismically detected staircase geometry. These brittle structures cut two subvertical dykes (27 and 27′ Dykes) with a NNE–SSW to N–S trend. The faults present high FI (FI>12) adjacent bands of irregular geometry in detail that intersect in space delimiting rhombohedral blocks of relatively less fractured granite (FI<6). Both structural domains likely correspond with the protolith and the damaged zone/fault core in the widely accepted model for fault zone architecture. Therefore, the construction of 3-D grids of the FI in granitic areas affected by brittle tectonics permits the quantitative structural characterization of the rock massif.  相似文献   

Ultra-high-temperature metamorphism and multistage decompressional evolution of sapphirine granulites from the Palni Hill Ranges, southern India   总被引：12，自引：0，他引：12  

M. RAITH  S. KARMAKAR  & M. BROWN 《Journal of Metamorphic Geology》1997,15(3):379-399

Sapphirine granulites from a new locality in the Palni Hill Ranges, southern India, occur in a small enclave of migmatitic, highly magnesian metapelites (mg=85–72) within massive enderbitic orthogneiss. They show a variety of multiphase reaction textures that partially overprint a coarse-grained high-pressure assemblage of Bt+Opx+Ky+Grt+Pl+Qtz. The sequence of reactions as deduced from the corona and symplectite assemblages, together with petrogenetic grid considerations, records a clockwise P–T evolution with four distinct stages. (1) Equilibration of the initial high-P assemblage in deep overthickened crust (12 kbar/800–900 °C) was followed by a stage of near-isobaric heating, presumably as a consequence of input of extra heat provided by the voluminous enderbitic intrusives. During heating, kyanite was converted to sillimanite, and biotite was involved in a series of vapour-phase-absent melting reactions, which resulted in the ultra-high-temperature assemblage Opx+Crd+Kfs+Spr±Sil, Grt, Qtz, Bt, coexisting with melt (equilibration at c. 950–1000° C/11–10 kbar). (2) Subsequently, as a result of decompression of the order of 4 kbar at ultra-high temperature, a sequence of symplectite assemblages (Opx+Sil+Spr/Spr+Crd→Opx+Spr+Crd→Opx+Crd→Opx+Crd+Spl/Crd+Spl) developed at the expense of garnet, orthopyroxene and sillimanite. This stage of near-isothermal decompression implies rapid ascent of the granulites into mid-crustal levels, possibly due to extensional collapse and erosion of the overthickened crust. (3) Development of late biotite through back-reaction of melt with residual garnet indicates a stage of near-isobaric cooling to c. 875 °C at 7–8 kbar, i.e. relaxation of the rapidly ascended crust to the stable geotherm. (4) A second period of near-isothermal exhumation up to c. 6–5 kbar/850 °C is indicated by the partial breakdown of late biotite through volatile phase-absent melting reactions. Available isotope data suggest that the early part of the evolutionary history (stages 1–3) is presumably coeval with the early Proterozoic metamorphism in the extended granulite terrane of the Nilgiri, Biligirirangan and Shevaroy Hills to the north, while the exhumation of the granulites from mid-crustal levels (stage 4) occurred only during the Pan-African thermotectonic event, which led to the accretion of the Kerala Khondalite Belt to the south.  相似文献   

欠压实地层古地层压力恢复的统计模拟法及其在松辽盆地中的应用   总被引：1，自引：0，他引：1  

付广  庞雄奇  姜振学  张树林 《沉积学报》1996,(1)

恢复烃源岩古地层压力和对于研究其生留排烃过程具有重要意义。Ｎａｋａｙａｍａ［１］等在开展盆地模拟研究时应用Ｒｕｂｅｙ（１９５９）和Ｃｈａｐｍａｎ（１９７）等人提出的数学地质模型对欠压实地层的古地层压力进行恢复。本文通过对松辽盆地欠压实地层的研究发现欠压实因子随地层厚度、埋深、围岩渗透性等地质条件的不同而改变，在此基础上提出了欠压实地层压力恢复的统计模拟法，克服了目前Ｎａｋａｙａｍａ［１］等将地层埋藏过程中的欠压实因子视为常数的不足，从而使计算结果更接近实际。统计模拟法在松辽盆地的应用结果表明了这一方法在实用中的可行性和有效性。  相似文献   

Genesis and distribution of mineral waters as a consequence of recent lithospheric dynamics: the Rhenish Massif,Central Europe     

Franz May  Stephan Hoernes  Horst J. Neugebauer 《International Journal of Earth Sciences》1996,85(4):782-799

Three major, interdependent processes control the genesis and distribution of mineral and thermal waters in the Rhenish Massif, Central Europe: (a) Magmatic processes in the upper mantle provide most of the CO₂ to produce bicarbonate waters in shallow aquifers. (b) Extension of the brittle upper crust enables the ascent of sodium chloride waters. (c) Uplift and erosion shape the massif's relief, which determines the extent of flow systems and the distribution of thermal springs. The chemistry of mineral waters further depends on the aquifers' mineral composition. A comprehensive set of hydrological, chemical, tectonic and geophysical data on the Rhenish Massif has been compiled. It was used to classify the mineral waters and to map the spatial distribution of water properties. The composition of cuttings from several representative wells producing different water types shows that the hydrothermal alteration of the aquifer rocks consists mainly of kaolinization of chlorite and dissolution of feldspar. Numerical transport simulations favour two modes of groundwater flow: topography-driven flow and the pressure-driven ascent of basement brines along active faults. Thermal convection is less important.  相似文献   

Assessment of hydrogeological conditions in basement aquifers of the Precambrian Oban massif, southeastern Nigeria   总被引：1，自引：0，他引：1  

A.E. Edet  C.S. Okereke 《Journal of Applied Geophysics》1997,36(4):195-204

A combined analysis of lineament length density from radar imagery and surface resistivity data is used to assess the hydrogeological conditions in the Oban massif, Nigeria. The results show that the data guided the qualitative and quantitative estimation of some aquifer parameters. These include resistivity of the water bearing formations (280–740 ω m), thickness (5–140 m), limited hydraulic conductivity (8.53-13.18 m/day) and transmissivity (410.65–725.88 m²/day) data. In addition, the lineament length density for the area ranged between less than 0.2 to slightly more than 0.4. Site evaluation for the location of productive boreholes/wells using a groundwater potential index (GWPI) indicates that areas with a GWPI of greater than 35 are consistent with relatively high yield.  相似文献   

岩层离距图法研究沉积岩断裂发育史——以松辽盆地敖古拉断裂为例     

雷茂盛  林静薇 《海相油气地质》2004,(Z1)

利用断裂活动过程中留下的各种地质标记研究断裂发育史是比较困难的 ,已有的研究方法主要可归纳出七种 ,都存在局限性。岩层离距图法是以地震剖面为基础 ,将穿过断裂的各剖面上的标志层投影到沿断裂走向的铅垂面上 ,得到多组标志层的垂向断距数据 ,然后用下部各标志层的断距减去最上部标志层的断距 ,并作多轮次计算 ,直到最后的断距差近似为零或仅剩一个非零标志层。每一轮次计算代表一个活动期次 ,如果出现负值 ,则表示有构造反转。对松辽盆地敖古拉断裂作了实例计算 ,结果为该断裂发育经历了三个正断活动期和一个逆断活动期 ,与盆地区域性活动有些差别。岩层离距图法比起其他已有方法 ,可靠程度大大提高  相似文献   

松辽盆地南部深层地震资料处理方法研究     

李振江  赵奎  杨秋莹  李春雨  张术权 《世界地质》2004,23(2):179-182,186

针对松辽盆地南部深层原始地震记录接收能量弱、信噪比低、各种干扰波严重和地表条件多变等存在严重的静校正问题，尝试利用CGG、Foucs、Grisys、Promax等多套处理系统的优势模块对跨工区二维大吾4面进行深部地层的折射波静校正、反褶积、剩余静校正、DipMoveOut、偏移等关键技术的联合处理方法试验研究，形成了一套针对松辽盆地南部深层地震资料处理的有效方法。  相似文献   

Complex Growth Textures in a Polymetamorphic Metabasite from the Kraubath Massif (Eastern Alps)   总被引：1，自引：0，他引：1  

FARYAD  SHAH WALI; HOINKES  GEORG 《Journal of Petrology》2004,45(7):1441-1451

Zoned garnet and amphibole occur in metabasites of the KraubathMassif, Eastern Alps, that contain relic magmatic clinopyroxene.The amphibole composition gradually changes from core (X_Mg =0·83) to rim (X_Mg = 0·6–0·7). A numberof compositional varieties of garnet occur in the metabasite.An older porphyroblastic garnet (Py_23–27, Alm_41–43,Grs_29–33) has two different compositional domains, onerelatively rich in Mg (Py_27–30) and the other rich inCa (Grs_35–38) with a low Mg (Py_20–25) content. Theyoungest variety, which forms rims on, or microveins in, theporphyroblastic garnet, has high Ca and low Mg (Grs_40–57,Py_2–7, Alm_46–51). The amphibole cores and garnetporphyroblasts are interpreted to represent minerals formedduring Variscan regional metamorphism under amphibolite-faciesconditions. Alpine metamorphism is represented by the most recentCa-rich and Mg-poor variety of garnet that coexists with theamphibole rims, epidote and chlorite. Fracturing in the porphyroblasticgarnet probably originated during retrogression of the Variscanamphibolite-facies assemblages. Textural relations suggest thatthe garnet in the microveins formed by dehydration of hydrousphases during an Alpine metamorphic overprint that reached P–Tconditions of 550–583°C at 1·0 GPa. KEY WORDS: microveins; garnet; metabasites; Kraubath Massif; Eastern Alps  相似文献   

Evidence for Neotethys rooted within the Vardar suture zone from the Voras Massif, northernmost Greece   总被引：2，自引：0，他引：2  

Sally A. M. Brown  Alastair H. F. Robertson   《Tectonophysics》2004,381(1-4):143

Three conflicting models are currently proposed for the location and tectonic setting of the Eurasian continental margin and adjacent Tethys ocean in the Balkan region during Mesozoic–Early Tertiary time. Model 1 places the Eurasian margin within the Rhodope zone relatively close to the Moesian platform. A Tethyan oceanic basin was located to the south bordering a large “Serbo-Pelagonian” microcontinent. Model 2 correlates an integral “Serbo-Pelagonian” continental unit with the Eurasian margin and locates the Tethys further southwest. Model 3 envisages the Pelagonian zone and the Serbo-Macedonian zone as conjugate continental units separated by a Tethyan ocean that was sutured in Early Tertiary time to create the Vardar zone of northern Greece and former Yugoslavia. These published alternatives are tested in this paper based on a study of the tectono-stratigraphy of a completely exposed transect located in the Voras Mountains of northernmost Greece. The outcrop extends across the Vardar zone, from the Pelagonian zone in the west to the Serbo-Macedonian zone in the east.Within the Voras Massif, six east-dipping imbricate thrust sheets are recognised. Of these, Units 1–4 correlate with the regional Pelagonian zone in the west (and related Almopias sub-zone). By contrast, Units 5–6 show a contrasting tectono-stratigraphy and correlate with the Paikon Massif and the Serbo-Macedonian zone to the east. These units form a stack of thrust sheets, with Unit 1 at the base and Unit 6 at the top. Unstacking these thrust sheets places ophiolitic units between the Pelagonian zone and the Serbo-Macedonian zone, as in Model 3. Additional implications are, first, that the Paikon Massif cannot be seen as a window of Pelagonian basement, as in Model 1, and, secondly, Jurassic andesitic volcanics of the Paikon Massif locally preserve a gneissose continental basement, ruling out a recently suggested origin as an intra-oceanic arc.We envisage that the Almopias (Vardar) ocean rifted in Triassic time, followed by seafloor spreading. The Almopias ocean was consumed beneath the Serbo-Macedonian margin in Jurassic time, generating subduction-related arc volcanism in the Paikon Massif and related units. Ophiolites were emplaced onto the Pelagonian margin in the west and covered by Late Jurassic (pre-Kimmeridgian) conglomerates. Other ophiolitic rocks formed within the Vardar zone (Ano Garefi ophiolite, Unit 4) in latest Jurassic–Early Cretaceous time and were not deformed until Early Tertiary time. The Vardar zone finally sutured in the Early Tertiary creating the present imbricate thrust structure of the Voras Mountains.  相似文献   

Exhumation of high-pressure rocks of the Kokchetav massif: facts and models   总被引：1，自引：0，他引：1  

N.L. Dobretsov  V.S. Shatsky 《Lithos》2004,78(3):307-318

The exhumation of ultrahigh-pressure (UHP) metamorphic units from depths more than 100-120 km is one of the most intriguing questions in modern petrology and geodynamics. We use the diamondiferous Kumdy-Kol domain in the Kokchetav Massif to show that exhumation models should take into consideration initially high uplift velocities (from 20 down to 6 cm/year) and the absence of the deformation of UHP assemblages. The high rate of exhumation are indicated by ion microprobe (SHRIMP) dating of zircons from diamondiferous rocks and supported by the low degree of nitrogen aggregation in metamorphic diamonds.Diamondiferous rocks in the Kumdy-Kol domain occur as steeply dipping (60°-80°) thin slices (few hundred metres) within granite-gneiss. Using geological, petrological and isotopic-geochemical data, we show that partial melting of diamondiferous metamorphic rocks occurred; a very important factor which has not been taken into account in previous models.Deformation of diamondiferous rocks at Kumdy-Kol is insignificant; diamond inclusions in garnet are often intergrown with mica crystals carrying no traces of deformation. All these facts could be explained by partial melting of metapelites and granitic rocks in the Kumdy-Kol domain. The presence of melt is responsible for an essential reduction of viscosity and a density difference (Δρ) between crustal rocks and mantle material and reduced friction between the upwelling crustal block, the subducting and overriding plates. Besides Δρ, the exhumation rate seems to depend on internal pressure in the subducting continental crustal block which can be regarded as a viscous layer between subducting continental lithosphere and surrounding mantle.We construct different models for the three stages of exhumation: a model similar to “corner flow” for the first superfast exhumation stage, an intermediate stage of extension (most important from structural point of view) and a very low rate of exhumation in final diapir+erosional uplift.  相似文献