论城市地下管线MIS与城市规划管理的关系——以胶南市城市地下管线MIS为例     

李继宏  尹衍勇  陆玉梅  卢刚书 《测绘与空间地理信息》2006,29(6):118-120

在分析山东省胶南市城市地下管线M IS的基础上,从两个方面论述了城市地下管线与城市规划管理的关系,认为城市地下管线M IS和城市规划管理之间相互作用、互为补充、关系密切。城市地下管线M IS为城市规划管理工作提供了准确而有现势性的基础资料,提高了规划管理的工作效能和城市规划管理水平;城市规划管理保障了城市地下管线M IS数据的动态更新和现势性,实现地下管线从规划设计审批竣工测量,到系统数据更新的全过程动态管理。  相似文献   

Atmospheric radiative transfer simulation for atmospheric correction of remote sensing data     

Yunfei Bao  Shengbo Chen 《世界地质(英文版)》2006,9(1)

The radiance leaving the earth-atmosphere system which can be sensed by a satellite borne radiometer is the sum of radiation emission from the earth surface and each atmospheric level that are transmitted to the top of the atmosphere. The radiation emission from the earth surface and the radiance of each atmospheric level can be separated from the radiance at the top the atmospheric level measured by a satellite borne radiometer. However, it is very difficult to measure the atmospheric radiance, especially the synchronous measurement with the satellite. Thus some atmospheric radiative transfer models have been developed to provide many options for modeling atmospheric radiation transport, such as LOWTRAN, MODTRAN, 6S, FASCODE, LBLRTM, SHARC, and SAMM. Meanwhile, these models can support the detailed detector system design, the optimization and evaluation of satellite mission parameters, and the data processing procedures. As an example, the newly atmospheric radiative transfer models, MODTRAN will be compared with other models after the atmospheric radiative transfer is described. And the atmospheric radiative transfer simulation procedures and their applications to atmospheric transmittance, retrieval of atmospheric elements, and surface parameters, will also be presented.  相似文献   

THE THEORY OF RESPONSE ANALYSIS OF FUZZY STOCHASTIC DYNAMICAL SYSTEMS WITH A SINGLE DEGREE OF FREEDOM     

Y. ZHANG  G. WANG  F. SU  Z. QIAO 《地震工程与结构动力学》1996,25(3):235-251

Most real-life structural/mechanical systems have complex geometrical and material properties and operate under complex fuzzy environmental conditions. These systems are certainly subjected to fuzzy random excitations induced by the environment. For an analytical treatment of such a system subjected to fuzzy random excitations, it becomes necessary to establish the general theory of dynamic response of a system to fuzzy random excitations. In this paper, the theory of response, fuzzy mean response and fuzzy covariance response of a single-degree-of-freedom (sdf) system to fuzzy random excitations in the time domain and frequency domain is put forward. The theory of response analysis of an sdf system to both stationary and non-stationary fuzzy random excitations in the time domain and frequency domain is established. Two examples are considered in order to demonstrate the rationality and validity of the theory, and the models of stationary filtered white noise and non-stationary filtered white noise fuzzy stochastic processes of the earthquake ground motion are set up. Methods of analysis for fuzzy random seismic response of sdf systems are put forward using the principles of response analysis of an sdf fuzzy random dynamic system.  相似文献   

THE ‘NEW IMPLICIT METHOD’ FOR TUNNEL ANALYSIS     

D. BERNAUD  G. ROUSSET 《国际地质力学数值与分析法杂志》1996,20(9):673-690

Tunnel excavation is a coupled three-dimensional problem dealing with two different structures: lining and rockmass. For a simple application it is useful to develop simplified methods by treating the problem as plane strain. If the problem of tunnel face advance presents an axisymmetric geometry, then we show that the major parameter governing the ground–interface–lining interaction is the convergence of the tunnel U₀ at the moment of the lining installation. The ‘New Implicit Method’ (NIM) presented in this paper makes use of principles similar to those of the ‘convergence–confinement’ method, but it provides a better appreciation of the coupled behaviour of rockmass and lining. For independent time constitutive laws (elasticity and plasticity), we point out that the convergence U₀ depends not only on the mechanical behaviour of the rockmass and on the distance from the tunnel face, as predicted by the ‘convergence–confinement’ method, but also on the stiffness of the lining previously set. We present the ‘NIM’ for elastic and perfect elastoplastic rockmasses without dilatancy for many criteria. The development of this new method is based on the results of tunnel calculations with an axisymmetric FEM numerical model that takes into account the three-dimensional aspect of the problem. Using this method is simple and its results agree well with the FEM numerical results. Its accuracy is highly satisfactory for a geotechnical study.  相似文献   

三维CT成像的数学模型   总被引：2，自引：0，他引：2  

杨克柽  叶育盛  余晓锷  林意群 《CT理论与应用研究》2006,15(1):37-41

三维CT成像广泛应用于放疗模拟定位等临床实践。当扫描运动物体时三维图像存在的位移和形变,与扫描参数设置和被扫描物体的运动状态等关系密切。本文通过理论分析CT扫描过程,建立三维成像的数学模型,计算三维图像的时间分辨率、位移和形变等指标,并分析其变化规律,为将来进一步的实验研究奠定基础。  相似文献   

应用核磁共振成像(NMRI)技术研究复合剂驱油特征     

郎东江  王为民  尚根华 《CT理论与应用研究》2006,15(3):11-16

本文应用核磁共振成像技术,在均值、非均值模型中研究了复合剂驱油动态实验过程。观察及分析了复合剂驱油特征和效果,对复合剂驱油段塞前缘进行了实时跟踪,得到了复合剂驱油段塞前缘油墙的形成及剩余油分布与运移的二维图像,给出了复合剂驱油后,剩余油的饱和度分布曲线。实验表明:在层状非均值地层中,若渗透率差异大,复合剂段塞主要进入高渗层,而波及不到低渗层,即复合剂波及效率低。若渗透率差异小,复合剂段塞大部分进入高渗层,有少部分进入低渗层,即复合剂波及效率较高。  相似文献   

GE VCT-高图像质量和低剂量的和谐   总被引：3，自引：1，他引：2  

李剑颖 《CT理论与应用研究》2006,15(3):57-60

在本文中讨论了实现图像质量和X射线剂量的和谐和同一的重要性,介绍了GELightSpeedVCT在硬件,软件和临床应用上降低病人剂量的方法。VCT在实现各向同性高分辨率的同时努力提高X射线的有效利用率,降低病人剂量,真正实现了高图像质量和低剂量的和谐。  相似文献   

基于VTK的医学图像系统研究   总被引：6，自引：0，他引：6  

刘志健  王蓉  刘玉玲  余飞鸿 《CT理论与应用研究》2006,15(2):38-42

医学三维数据场可视化是当前科学计算可视化应用的重点。本文论述了可视化工具包VisualizationToolkit(VTK)的主要特点,介绍了三维医学可视化系统实现的原理和方法。根据一系列人体断面图像,应用VTK实现了三维医学图像重构,对重构后的三维图像进行解剖分析;并实现对人体的二维图像逐帧浏览及柱状统计。实验结果表明,VTK具有使用灵活,功能强大的优点,是医学三维数据场可视化的有力工具。  相似文献   

医用PET系统技术概述     

曾海宁  刘小平  赵明 《CT理论与应用研究》2006,15(2):28-32

PET(正电子发射成像)是当今高层次的核医学技术。它综合了核技术、核电子学、计算机、数据处理等领域中的尖端技术,是当前医学界最先进的大型医疗诊断成像设备之一,在肿瘤、心血管疾病和神经系统疾病的临床诊断中发挥着越来越重要的作用。本文以国产32环高档临床PET为例,较详细地介绍了PET设备的工作原理、总体基本结构及各子系统基本功能,对PET整机性能及其临床应用也做了简述。  相似文献   

基于组件的地理信息系统的研究与开发     

赵伟  谢德体  刘洪斌  武伟 《测绘与空间地理信息》2006,29(2):16-19

详细阐述了基于组件GIS的技术基础及其特点,区别了两种形式的组件式GIS,给出了基于接口的组件式GIS的开发方式。以重庆市柑橘生产信息管理系统开发为例,论述了用ArcGIS 8的ArcObjects提供的COM组件进行系统开发的方法。将该系统与传统的GIS系统相比,阐述了它在系统开发、系统扩展和系统集成等方面所体现的优点。  相似文献