采空区二维超声波物理模型实验研究     

赵家福  田钢  石战结  王者江 《吉林大学学报(地球科学版)》2005,(Z1)

由于对资源矿产的过度开采使得矿山地区(尤其是煤矿)出现了采空区,从而引起地表塌陷等地质灾害。为了深入了解地震方法在采空区调查中的应用效果,从超声波物理模型实验研究出发,论述了物理模型的原理和制作,研究了采空区的地震波场特征,并利用W inse is软件对所采集的二维超声波实验数据进行了处理。由叠偏剖面推断的采空区的位置与实际模型相符,从而验证了超声波采空区物理模型试验是有效的、可信的;同时可以为实际探测采空区提供进一步的理论依据。  相似文献   

桂林地区古人类演化及环境变迁研分     

王华  杨琰  张会领 《地球学报》2005,26(Z1):205-208

桂林地区曾是古人类活动活跃的地区，据可以断代的古人类洞穴遗址统计，发现桂北地区大部分的洞穴遗址其年代的下限都在距今约7000a 左右，此后古人类离开了洞穴，史前文化也随之发生了重要改变。影响古人类演化的因素鹅很多，究竟是什么原因驱使古人类离开洞穴，改变生活习性，这一问题一直都是困扰考古学界的难题。本文通赤研究桂北地区洞穴遗址的堆积特点，结合洞穴沉积－堆积物的特征及其孢粉记录的古气候信息，探讨了季风气候变化对桂林地区古气候变化的影响作用和气候演变历史，揭示了桂林地区全新世以来的季风气候变化时间序列和突变事件以及对古人类生存环境的影响。距今7000a 左右为中全新世气候适宜期，东亚夏季风强盛，气温升高，桂林地区的降雨增多，一方面由于地下河水位升高，淹没了穴居洞穴，其次是由于降雨增多，导致洞穴湿度增大，从而迫使古人类搬出洞穴。  相似文献   

形变数字化观测曲线畸变与处理——兼论资料预处理中遇到的一些问题     

黄晓华 《福建地震》2005,(4)

数字化形变台站日常下载、处理直至管理数据,都应用《数字化通讯控制软件》、《形变前兆台站(网)数据处理系统》及《形变前兆数据库服务软件(台站版)》等三个软件交互进行,在实际使用过程中会遇到一些棘手的问题。本文结合我台的观测工作的实践,总结经验,以供台站同行共享。  相似文献   

浅析福建地倾斜潮汐因子γ及其组合动态特征     

傅再扬  危福泉  吴绍祖  陈光 《福建地震》2005,(Z1)

本文计算了福建自1992年至2004年以来的地倾斜EW和NS两分量的固体潮潮汐因子,并进行动态组合,绘制组合动态三种特征量:ΔγEW ΔγNS(表征扩容)、ΔγEW-ΔγNS(表征剪切应变)、ΔγEW/ΔγNS(表征介质各向异性)的时序曲线图,并进行固体潮特征分析,寻找中、强地震发生前远场块体和近场块体地倾斜突变性形变异常与之对应关系。结果表明:在福建沿海,海潮是决定倾斜固体潮特征的主要因素;福建发生5级上的中强地震、台湾发生7级以上强烈地震时,福建地倾斜固体潮潮汐因子及其动态组合特征存在明显的渐进式突变性形变异常现象,异常量和异常持续时间与震级和震中距有较好的对应关系。  相似文献   

Prediction of creep characteristic of rock under varying environment   总被引：2，自引：0，他引：2  

T. N. Singh  A. K. Verma 《Environmental Geology》2005,48(4-5):559-568

The strain developed due to creep is mainly proportional to the logarithm of the time under load, and is mostly proportional to the stress and temperature. At higher temperature the creep rate falls slowly with respect to time, and the creep strain is proportional to a fractional power of time, with the exponent increasing as the temperature increases and reaching a value approximately one-third at temperatures of about 0.5°C. At these temperatures, the creep increases with stress according to a power greater than unity and possibly exponentially. It increases with temperature as (−U/kT), where U is an activation energy and k is Boltzman’s constant. There are different methods to determine the creep strain and the energy of Jog (B) including experimental methods, multivariate regression analysis, and by numerical simulation. These methods are less cumbersome and time consuming. In the present investigation, artificial neural network technique has been used for prediction of the creep strain and energy of Jog (B). Two different networks have been tested and validated. Both the networks have four input neurons and one hidden layer with five neurons, and one output neuron. The data for different rocks at temperatures up to 750°C under conditions of compressive or tortional stress are taken from the literatures. The training and testing data sets used were 163 and 14, respectively. To deal with the problem of overfitting of data, Bayesian regulation has been used and network is trained with suitable training epochs. The coefficients of correlation among the predicted and observed values are found high and they improve the confidence of the users. The mean absolute percentage error obtained are also very low.  相似文献   

Experimental determination of REE partition coefficients between zircon,garnet and melt: a key to understanding high‐T crustal processes          下载免费PDF全文

R. J. M. Taylor  S. L. Harley  R. W. Hinton  S. Elphick  C. Clark  N. M. Kelly 《Journal of Metamorphic Geology》2015,33(3):231-248

The partitioning of rare earth elements (REE) between zircon, garnet and silicate melt was determined using synthetic compositions designed to represent partial melts formed in the lower crust during anatexis. The experiments, performed using internally heated gas pressure vessels at 7 kbar and 900–1000 °C, represent equilibrium partitioning of the middle to heavy REE between zircon and garnet during high‐grade metamorphism in the mid to lower crust. The D_REE (zircon/garnet) values show a clear partitioning signature close to unity from Gd to Lu. Because the light REE have low concentrations in both minerals, values are calculated from strain modelling of the middle to heavy REE experimental data; these results show that zircon is favoured over garnet by up to two orders of magnitude. The resulting general concave‐up shape to the partitioning pattern across the REE reflects the preferential incorporation of middle REE into garnet, with D_Gd (zircon/garnet) ranging from 0.7 to 1.1, D_Ho (zircon/garnet) from 0.4 to 0.7 and D_Lu (zircon/garnet) from 0.6 to 1.3. There is no significant temperature dependence in the zircon–garnet REE partitioning at 7 kbar and 900–1000 °C, suggesting that these values can be applied to the interpretation of zircon–garnet equilibrium and timing relationships in the ultrahigh‐T metamorphism of low‐Ca pelitic and aluminous granulites.  相似文献   

Dynamic analysis of strain localization in water‐saturated clay using a cyclic elasto‐viscoplastic model     

B. Shahbodagh Khan  M. Mirjalili  S. Kimoto  F. Oka 《国际地质力学数值与分析法杂志》2014,38(8):771-793

A computational framework is presented for dynamic strain localization and deformation analyses of water‐saturated clay by using a cyclic elasto‐viscoplastic constitutive model. In the model, the nonlinear kinematic hardening rule and softening due to the structural degradation of soil particles are considered. In order to appropriately simulate the large deformation phenomenon in strain localization analysis, the dynamic finite element formulation for a two‐phase mixture is derived in the updated Lagrangian framework. The shear band development is shown through the distributions of viscoplastic shear strain, the axial strain, the mean effective stress, and the pore water pressure in a normally consolidated clay specimen. From the local stress–strain relations, more brittleness is found inside the shear bands than outside of them. The effects of partially drained conditions and mesh‐size dependency on the shear banding are also investigated. The effect of a partially drained boundary is found to be insignificant on the dynamic shear band propagation because of the rapid rate of applied loading and low permeability of the clay. Using the finer mesh results in slightly narrower shear bands; nonetheless, the results manifest convergency through the mesh refinement in terms of the overall shape of shear banding and stress–strain relations. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Modeling the 2D behavior of dry‐stone retaining walls by a fully discrete element method          下载免费PDF全文

James J. Oetomo  Eric Vincens  Fabian Dedecker  Jean‐Claude Morel 《国际地质力学数值与分析法杂志》2016,40(7):1099-1120

The dry‐stone retaining walls (DSRW) have been tipped as a promising solution for sustainable development. However, before recently, their behavior is relatively obscure. In this study, discrete element method (DEM) approach was applied to simulate the plane strain failure of these walls. A commercial DEM package (PFC2D™) was used throughout this study. The authors used a fully discrete approach; thus, both the wall and the backfill were modeled as discrete elements. The methodology for obtaining the micromechanical parameters was discussed in detail; this includes the three mechanical sub‐systems of DSRWs: wall, backfill and interface. The models were loaded progressively until failure, and then the results were compared with the full‐scale experimental results where the walls were loaded, respectively, with hydrostatic load and backfill. Despite its complexity and its intensive calculation time, DEM model can then be used to validate a more simplified approach. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Reaction softening by dissolution–precipitation creep in a retrograde greenschist facies ductile shear zone,New Hampshire,USA          下载免费PDF全文

R. J. McAleer  D. L. Bish  M. J. Kunk  K. R. Sicard  P. M. Valley  G. J. Walsh  B. A. Wathen  R. P. Wintsch 《Journal of Metamorphic Geology》2017,35(1):95-119

We describe strain localization by a mixed process of reaction and microstructural softening in a lower greenschist facies ductile fault zone that transposes and replaces middle to upper amphibolite facies fabrics and mineral assemblages in the host schist of the Littleton Formation near Claremont, New Hampshire. Here, Na‐poor muscovite and chlorite progressively replace first staurolite, then garnet, and finally biotite porphyroblasts as the core of the fault zone is approached. Across the transect, higher grade fabric‐forming Na‐rich muscovite is also progressively replaced by fabric‐forming Na‐poor muscovite. The mineralogy of the new phyllonitic fault‐rock produced is dominated by Na‐poor muscovite and chlorite together with late albite porphyroblasts. The replacement of the amphibolite facies porphyroblasts by muscovite and chlorite is pseudomorphic in some samples and shows that the chemical metastability of the porphyroblasts is sufficient to drive replacement. In contrast, element mapping shows that fabric‐forming Na‐rich muscovite is selectively replaced at high‐strain microstructural sites, indicating that strain energy played an important role in activating the dissolution of the compositionally metastable muscovite. The replacement of strong, high‐grade porphyroblasts by weaker Na‐poor muscovite and chlorite constitutes reaction softening. The crystallization of parallel and contiguous mica in the retrograde foliation at the expense of the earlier and locally crenulated Na‐rich muscovite‐defined foliation destroys not only the metastable high‐grade mineralogy, but also its stronger geometry. This process constitutes both reaction and microstructural softening. The deformation mechanism here was thus one of dissolution–precipitation creep, activated at considerably lower stresses than might be predicted in quartzofeldspathic rocks at the same lower greenschist facies conditions.  相似文献   

Contrast in stress–strain history during exhumation between high- and ultrahigh-pressure metamorphic units in the Western Alps: Microboudinage analysis of piemontite in metacherts     

《Journal of Structural Geology》2016

Our analyses of microboudinage structures of piemontite grains embedded within six samples of metachert, one collected from an ultrahigh-pressure (UHP) metamorphic unit at Lago di Cignana in Italy of the Western Alps, and the other five from surrounding high-pressure (HP) metamorphic units in Italy and France, have revealed that the structures are all symmetrical in type, and were presumably produced in coaxial strain fields. Stress–strain analyses of the microboudinaged grains revealed significant contrasts in the stress and strain histories of the UHP and HP metamorphic units, with the differential stress recorded by the UHP sample being unequivocally lower than that recorded by the five HP samples. In addition, our analyses showed that the UHP sample underwent stress-relaxation during microboudinage, whereas the five HP samples did not. On the basis of these observations and analyses we discuss the mechanical decoupling of the UHP and HP units that led to different histories in differential stress between the units during exhumation of the Western Alps.  相似文献