A test method for analyzing the deformation of landslide model     

《地震研究进展（英文）》2021,1(3):100031

In order to study the overall deformation of geotechnical model conveniently, the worksite of landslide bridge foundation reinforced by the front and rear row anti-slide piles in Chenglan railway was taken as an example. On the basis of shaking tabe test of a 1/40 reduced scale model, the landslide deformation caused by vibration waves was monitored through burying self-made phosphor bronze strips in soil. Combined with the horizontal and vertical coordinates of the bending strain points on the phosphor bronze strips, the digital matrix was converted by applying Renka Cline random matrix generation method, and the two-dimensional contour plots were drawn based on it. The results showed that the two-dimensional contour plots reflected the basic law of landslide deformation reasonably, and it revealed the evolution process of landslide deformation and failure. The research conclusions were consistent with the test phenomenon, which met the basic requirements of overall deformation analysis of landslide model. This proposed method can monitor multiple cross sections and was practical for model test.  相似文献   

Estimating economic losses of midrise reinforced concrete shear wall buildings in sedimentary basins by combining empirical and simulated seismic hazard characterizations     

Pouria Kourehpaz  Carlos Molina Hutt  Nasser A. Marafi  Jeffrey W. Berman  Marc O. Eberhard 《地震工程与结构动力学》2021,50(1):26-42

Studies of recorded ground motions and simulations have shown that deep sedimentary basins can greatly increase the intensity of earthquake ground motions within a period range of approximately 1–4 s, but the economic impacts of basin effects are uncertain. This paper estimates key economic indicators of seismic performance, expressed in terms of earthquake‐induced repair costs, using empirical and simulated seismic hazard characterizations that account for the effects of basins. The methodology used is general, but the estimates are made for a series of eight‐ to 24‐story residential reinforced concrete shear wall archetype buildings in Seattle, WA, whose design neglects basin effects. All buildings are designed to comply with code‐minimum requirements (i.e., reference archetypes), as well as a series of design enhancements, which include (a) increasing design forces, (b) decreasing drift limits, and (c) a combination of these strategies. As an additional reference point, a performance‐based design is also assessed. The performance of the archetype buildings is evaluated for the seismic hazard level in Seattle according to the 2018 National Seismic Hazard Model (2018 NSHM), which explicitly considers basin effects. Inclusion of basin effects results in an average threefold increase in annualized losses for all archetypes. Incorporating physics‐based ground motion simulations to represent the large‐magnitude Cascadia subduction interface earthquake contribution to the hazard results in a further increase of 22% relative to the 2018 NSHM. The most effective of the design strategies considered combines a 25% increase in strength with a reduction in drift limits to 1.5%.  相似文献   

往复荷载作用下锈蚀钢筋混凝土柱黏结滑移模型及数值模拟研究          下载免费PDF全文

王斌  吕斌  丁一爽  孙勇峰  王家滨 《地震工程学报》2021,43(4):920-929

为实现地震作用下锈蚀钢筋混凝土柱精细化数值模拟分析,基于已有研究成果建立往复荷载作用下锈蚀钢筋与混凝土间的黏结滑移本构模型:结合课题组前期试验结果,采用ABAQUS有限元分析软件对建立的黏结滑移本构模型进行有效性验证,通过对数值计算结果与试验结果之间误差分析,进一步对黏结滑移模型中的摩擦黏结应力系数和退化系数进行修正,最终建立更为合理的锈蚀钢筋与混凝土间黏结滑移本构模型。通过数值计算结果与试验结果的再次比较,验证修正后黏结滑移本构模型的有效性。结果表明:修正后的锈蚀钢筋与混凝土间黏结滑移模型可更好地反映往复荷载作用下锈蚀钢筋混凝土柱的滞回性能。该成果可为地震作用下锈蚀钢筋混凝土结构的数值分析计算提供理论参考。  相似文献   

不同跨高比对多层钢框架内填混凝土深梁结构抗震性能影响          下载免费PDF全文

袁晓洒    张力    刘方    贾腾飞  贾星亮   《世界地震工程》2021,(1):034-40

为了研究不同跨高比多层钢框架内填混凝土深梁结构的抗震性能,在钢框架内填混凝土深梁滞回性能试验的基础上,利用ABAQUS对六层纯钢框架（结构一）、钢框架内填跨高比为2混凝土深梁结构（结构二）和钢框架内填跨高比为0.75混凝土深梁结构（结构三）进行弹塑性时程分析。结果表明:内填混凝土深梁使结构整体刚度明显增大;在地震波的作用下,结构二的最大顶点位移降低可达58.3%,结构三的最大顶点位移降低可达89.3%,内填混凝土深梁,结构的抗侧移性能得到了极大改善,且随着深梁跨高比的减小而大幅度提升;结构二滞回曲线饱满,呈现纺锤形,混凝土深梁充分起到了第一道防线作用。经济合理的钢框架内填混凝土深梁结构具有一定的工程应用价值。  相似文献   

不同轴压比RCS梁柱组合件恢复力模型研究          下载免费PDF全文

朱旦  李升才  朱永甫 《世界地震工程》2021,(2):143-152

以6个1/2模型RCS梁柱节点拟静力试验为基础,研究不同轴压比下RCS组合件的滞回性能。试验结果表明:梁铰破坏时试件的滞回曲线饱满,耗能能力优于构造破坏;随着轴压比的增大,试件滞回环愈加丰满,初始刚度有所增加,承载力有所增大;随着加载位移的增加,刚度退化速率变慢,且梁铰破坏时随着轴压比增大,刚度退化速率变大。基于试验结果和现有恢复力模型理论,建立的三折线骨架曲线模型与实际试验骨架曲线具有较高的吻合度,能较好的反映轴压比对其滞回特性的影响,可为该RCS梁柱组合件的弹塑性分析及工程应用提供参考。  相似文献   

构建长江干流地区沿江城市带   总被引：1，自引：1，他引：0  

王志宪  虞孝感 《地理与地理信息科学》2004,20(4):66-70

建设沿江城市带是为了顺应现代城市的发展潮流,加速沿江地区区域经济一体化的进程。建立沿江区域协调发展体系、走大中小城市协调发展的城市化道路、巩固长江发展轴的核心地位、统筹沿江重大基础设施的建设是城市带发展的总体构想。由于沿江各地区发展条件迥异,城市带的建设采取了分区发展的模式,在沿江地区总的发展框架内,设想在城市带内构建7个城市群、城市组团等,根据各集团的特征,制定不同的发展战略。  相似文献   

混凝土徐变对抗滑桩结构的影响分析     

韩庆洋  陈德斌  付晶 《地质灾害与环境保护》2019,30(1):79-82

混凝土徐变作用能够增大桩身弯曲变形,占用设计冗余。增大受拉侧混凝土裂缝宽度,降低结构耐久性。由于抗滑桩嵌固段属于隐蔽工程,无法及时发现此类问题,故将会对防治工程造成安全隐患。本文采用在抗滑桩埋设应变计,定期监测桩身应变数值的方法,研究了悬臂式抗滑桩在成桩后至一定时期内的实际受力变形情况。特别是对工程运行初期混凝土徐变作用下的桩身变形情况,进行了分析与总结,最后提出了抗滑桩设计时注意事项。  相似文献   

薄壁结构砼的裂缝与处理   总被引：1，自引：0，他引：1  

赵全江  陈立军 《海岸工程》2004,23(3):34-41

分析了万年闸船闸砼工程结束后薄壁砼结构墙体出现大面积贯通性裂缝的发生原因,提出了修复裂缝的工艺方案,总结了预防此类裂缝发生的有效措施。  相似文献   

大体积混凝土表面质量通病的防治     

李芬芬 《海岸工程》2004,23(3):27-30

大体积混凝土是指最小断面尺寸大于1m的混凝土结构,而且其尺寸已经大到必须采取相应的技术措施妥善处理温度差和合理解决温度应力问题并控制裂缝扩展,因此,大体积模注混凝土的表面质量通病的防治是施工质量控制的一项重要内容。对大体积混凝土表面质量通病的形成原因和防治措施进行了探讨。  相似文献   

Numerical evaluation of soft inter‐slab joint in concrete‐faced rockfill dam with dual mortar finite element method          下载免费PDF全文

Mozhen Zhou  Bingyin Zhang  Chong Peng 《国际地质力学数值与分析法杂志》2018,42(5):781-805

Recently constructed concrete‐faced rockfill dams (CFRDs) often use soft inter‐slab joints to prevent axial compression‐induced extrusion damage in the concrete face. Due to the complexity of the multibody contact and the lack of information on the actual behavior of soft joints, it is highly challenging to numerically assess the effect of soft joints in CFRDs. In this paper, we present a numerical approach for the three‐dimensional modeling of CFRDs with hard and soft joints. A dual mortar finite element method with Lagrange multiplier is developed to treat the multibody contact in hard joints with impenetrability condition. The soft joint slab‐filler‐slab contact system is modeled using an equivalent contact interface approach, where the soft contact constraints are imposed using a perturbed Lagrange formulation. Through a series of laboratory tests, the mechanical behavior of soft joint is investigated. An extrusion model for the soft joint is presented and implemented in the dual mortar finite element method. The proposed numerical method is applied to the three‐dimensional analysis of Tianshengqiao‐1 CFRD. Despite the complex multibody contact and strong material and geometry nonlinearities in the CFRD, the proposed method is stable and capable of capturing salient characteristics of the CFRD. Numerical results show that in Tianshengqiao‐1, the employment of soft joints can effectively reduce the axial compression stress, thus greatly alleviating the risk of extrusion damage in the concrete face.  相似文献