Interaction between two sliders in a system with rate- and state-dependent friction   总被引：2，自引：0，他引：2  

何昌荣 《中国科学D辑(英文版)》2003,46(Z2)

This study examines slip recurrence patterns in a two-block spring-slider model with rate- and state-dependent friction. Both weak and strong heterogeneities are considered with different settings of coupling stiffness. The results show that the recurrence pattern of slips strongly depends on the degree of coupling between the two blocks. With strong coupling between the two blocks (e.g., kc/ki max >~1), the slip pattern of the system is simple and characterized by periodical stick-slips, with the two blocks slipping together. With strong heterogeneity in friction strength, period-2 motion is found for moderate coupling stiffness (kc/ki max=0.4) between the two blocks. More complicated patterns are found with weak coupling stiffness (kc/ki max=0.2) and strong heterogeneity. With strong heterogeneity, very weak coupling leads to chaotic slip patterns. With coupling stiffness kc=5 ki max and strong heterogeneity, chaotic slip patterns are not found, in contrast with the results by Huang and Turcotte who employed the classical static/kinetic friction law.  相似文献   

应力波与可滑移岩石界面间的相互作用研究   总被引：10，自引：1，他引：10  

卢文波 《岩土力学》1996,17(3):70-75

研究了应力波与用节理刚度系数描述的线性滑移岩石界面间的相互作用，给出了其透、反射波幅的一般表达式。通过应力波垂直人射界面时的具体分析，反映出岩石界面的节理刚度对应力波传播的重要影响，并揭示了岩石界面对应力波的高频滤波作用。  相似文献   

基于梯度塑性理论的岩样在压剪条件下变形及稳定性分析     

王学滨 《岩土力学》2004,25(Z2):39-42

考虑了正应力及剪应力联合作用在岩样的端部,而且,在正应力被视为变量,剪应力被视为常量这一特殊条件下,对剪切带的变形特征及剪切带-带外弹性体系统的失稳判据进行了分析.根据剪切虎克定律及梯度塑性理论,提出了剪切带内部弹性应变、塑性应变及总应变的解析式,对上述三种应变进行积分,提出了剪切带错动弹性位移、塑性位移及总位移的解析式.利用压缩虎克定律及几何关系建立了剪切带外弹性体的刚度的表达式.根据刚度理论,建立了剪切带-带外弹性体系统的失稳判据.考虑岩样端面的剪切应力后,在流动剪切应力相同时,剪切带内部的弹性剪切应变(均匀分布)将增加;剪切带内部的塑性剪切应变(不均匀分布)将减小;剪切带的弹性剪切位移(线性分布)将增加;剪切带的塑性剪切位移(非线性分布)将减小;剪切带错动位移要小一些.另外,剪切应力对剪切带-带外弹性体系统的失稳判据没有影响.失稳判据仅和岩石的本构参数、剪切带倾角及结构尺寸有关.  相似文献   

Identification of structural parameters of multistorey shear buildings from modal data     

S. Chakraverty 《地震工程与结构动力学》2005,34(6):543-554

A procedure has been presented in this paper to identify the structural parameters, viz. mass and stiffness matrices, from modal test data for multistorey shear buildings. The first two orders of modal data have been used by other researchers to estimate the global matrices where they depend only on measurable points which are less than the total number of structural degrees of freedom. The above method has been refined here by using Holzer criteria along with other numerical methods to estimate the global mass and stiffness matrices of the structure. This shows the methodology to be more efficient and accurate. The reliability of the procedure has been shown by examples of multistorey buildings. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

A practical method for estimating dynamic soil stiffness on surface of multi‐layered soil     

Naohiro Nakamura 《地震工程与结构动力学》2005,34(11):1391-1406

It is important to estimate the influence of layered soil in soil–structure interaction analyses. Although a great number of investigations have been carried out on this subject, there are very few practical methods that do not require complex calculations. In this paper, a simple and practical method for estimating the horizontal dynamic stiffness of a rigid foundation on the surface of multi‐layered soil is proposed. In this method, waves propagating in the soil are traced using the conception of the cone model, and the impulse response function can be calculated directly and easily in the time domain with a good degree of accuracy. The characteristics of the impedance, that is the transformed value to the frequency domain of the obtained impulse response, are studied using two‐ to four‐layered soil models. The cause of the fluctuation of impedance is expressed clearly from its relation to reflected waves from the lower layer boundary in the model. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Transient seepage analysis in zoned anisotropic soils based on the scaled boundary finite‐element method          下载免费PDF全文

Mohammad Hossein Bazyar  Abbas Talebi 《国际地质力学数值与分析法杂志》2015,39(1):1-22

The scaled boundary finite‐element method, a semi‐analytical computational scheme primarily developed for dynamic stiffness of unbounded domains, is applied to the analysis of unsteady seepage flow problems. This method is based on the finite‐element technology and gains the advantages of the boundary element method as well. Only boundary of the domain is discretized, no fundamental solution is required and singularity problems can be modeled rigorously. Anisotropic and non‐homogeneous materials satisfying similarity are modeled with no additional efforts. In this study, firstly, formulation of the method for the transient seepage flow problems is derived followed by its solution procedures. The accuracy, simplicity and applicability of the method are demonstrated via four numerical examples of transient seepage flow – three of them are available in the literature. Homogenous, non‐homogenous, isotropic and anisotropic material properties are considered to show the versatility of the technique. Excellent agreement with the finite‐element method is observed. The method out‐performs the finite‐element method in modeling singularity points. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Stress‐dependent elastic wave velocity of microfractured sandstone     

Daisuke Katsuki  Marte Gutierrez  Abdulhadi Almrabat 《国际地质力学数值与分析法杂志》2014,38(5):441-456

A model for the stress‐dependent elastic wave velocity response of fractured rock mass is proposed based on experimental evidence of stress‐dependent fracture normal and shear stiffness. Previously proposed models and previous experimental studies on stress‐dependent fracture stiffness have been reviewed to provide a basis for the new model. Most of the existing stress‐dependent elastic wave velocity models are empirical, with model parameters that do not have clear physical meanings. To propose the new model, the rock mass is assumed to have randomly oriented microscopic fractures. In addition, the characteristic length of microfractures is assumed to be sufficiently short compared to the rock mass dimensions. The macroscopic stress‐dependent elastic wave velocity response is assumed to be attributed to the stress dependency of fracture stiffness. The stress‐dependent fracture normal stiffness is defined as a generalized power law function of effective normal stress, which is a modification of the Goodman's model. On the other hand, the stress dependency of fracture shear stiffness is modeled as a linear function of normal stress based on experimental data. Ultrasonic wave velocity responses of a dry core sample of Berea sandstone were tested at effective stresses ranging from 2 to 55 MPa. Visual observation of thin sections obtained from the Berea sandstone confirms that the assumptions made for microstructure of rock mass model are appropriate. It is shown that the model can describe the stress‐dependent ultrasonic wave velocity responses of dry Berea sandstone with a set of reasonable material parameter values. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.  相似文献   

Ontogenic variation and effect of collection procedure on leaf biomechanical properties of Mediterranean seagrass Posidonia oceanica (L.) Delile          下载免费PDF全文

Carmen B. de los Santos  Bárbara Vicencio‐Rammsy  Gilles Lepoint  François Remy  Tjeerd J. Bouma  Sylvie Gobert 《Marine Ecology》2016,37(4):750-759

Leaf mechanical traits are important to understand how aquatic plants fracture and deform when subjected to abiotic (currents or waves) or biotic (herbivory attack) mechanical forces. The likely occurrence of variation during leaf ontogeny in these traits may thus have implications for hydrodynamic performance and vulnerability to herbivory damage, and may be associated with changes in morphologic and chemical traits. Seagrasses, marine flowering plants, consist of shoot bundles holding several leaves with different developmental stages, in which outer older leaves protect inner younger leaves. In this study we examined the long‐lived seagrass Posidonia oceanica to determine ontogenic variation in mechanical traits across leaf position within a shoot, representing different developmental stages. Moreover, we investigated whether or not the collection procedure (classical uprooted shoot versus non‐destructive shoot method: cutting the shoot without a portion of rhizome) and time span after collection influence mechanical measurements. Neither collection procedure nor time elapsed within 48 h of collection affected measurements of leaf biomechanical traits when seagrass shoots were kept moist in dark cool conditions. Ontogenic variation in mechanical traits in P. oceanica leaves over intermediate and adult developmental stages was observed: leaves weakened and lost stiffness with aging, while mid‐aged leaves (the longest and thickest ones) were able to withstand higher breaking forces. In addition, younger leaves had higher nitrogen content and lower fiber content than older leaves. The observed patterns may explain fine‐scale within‐shoot ecological processes of leaves at different developmental stages, such as leaf shedding and herbivory consumption in P. oceanica.  相似文献   

不同刚度植物杆群对规则波传播及紊动特性影响研究     

谭超  黄本胜  刘达  邱静  王珍  吉红香 《海洋工程》2016,34(6):38-45

以不同刚度硅胶圆杆群为概化植物模型,测定其抗弯弹性模量,通过波浪水槽实验,研究规则波在不同刚度植物杆群内的流速分布、紊动特征及不同刚度杆群的消浪效果。实验结果表明,当波浪通过柔性杆群时,受其摆动的影响,流速周期变化从单峰型逐渐转变成双峰型,杆群刚度越小形成的二次波峰越明显;不同刚度杆群内水体紊动强度变化显示,杆群刚度越大,造成杆群内水体的紊动强度越大;随着杆群抗弯弹性模量的增大,其消浪系数也增大,消浪系数的增长与材料的抗弯弹性模量值非线性关系,而是在某一弹性模量范围内,对消浪系数的影响较为敏感。  相似文献   

An example of slip instability resulting from displacement-varying strength     

David Lockner  James Byerlee 《Pure and Applied Geophysics》1990,133(2):269-281

A rock cylinder, containing a clay-filled sawcut making an angle of 30° to the sample axis, was deformed at constant confining and pore pressures and constant remote shortening rate. The sawcut surfaces contained a series of regularly spaced ridges and grooves oriented perpendicular to the direction of shear. The interaction of these grooved surfaces resulted in a sliding strength which varied periodically with displacement. By varying the effective machine stiffness through the use of an electronic feedback circuit, a range of stable and unstable slip behavior was achieved. In this way, we examined fault slip behavior which was dominated by displacement-dependent strength.  相似文献