A Step Towards Evaluation of the Seismic Response Reduction Factor in Multistorey Reinforced Concrete Frames   总被引：1，自引：0，他引：1  

Barakat  Samar a.  Husein Malkawi  Abdallah I.  Al-Shatnawi  Anis S. 《Natural Hazards》1997,16(1):65-80

A seismic nonlinear time-history analysis was made for four-, six-, and eight-storey reinforced concrete buildings. These buildings were made as three-dimensional space frame structures with shear walls in both orthogonal directions. They have five bays with 4.8 m spacing each in the horizontal direction, and three bays with 4.2 m spacing each in the transversal direction. The frames were designed according to the Jordanian Seismic Code of practice for Seismic Zones 4, 3, 2, and 1 as proposed for Jordan by several authors. Time-history analysis was made using the El Centro (N-S) earthquake record of May 1940 as an actual earthquake excitation. The response reduction factor (R) that primarily consists of two factors that are the ductility reduction (Rµ) and the overstrength (), is obtained. It has been seen that the seismic zoning has a slight effect on the ductility reduction factor for different buildings, since it ranges from Zone 4 to Zone 1 as 2.37 to 2.52, 1.72 to 1.78, and 1.14 to 1.18 for four-, six-, and eight-storey buildings, respectively. Moreover, it is observed that, for different buildings and different seismic zones, the ductility reduction factor (Rµ) is slightly different from the system ductility factor (µ) especially for higher values of µ (i.e., Rµ µ). The response reduction factor, called overstrength (), was evaluated. The overstrength factor was found to vary with seismic zones (Z) , number of stories, and design gravity loads. However, the dependency on seismic zones was the strongest. The average overstrength of these buildings in Zones 4 and 1 was 2.61 and 6.94, respectively. The overstrength increased as the number of storeys decreased: overstrength of a four-storey building was higher than an eight-storey building by 36% in Zone 4, and 39% in Zone 1. Furthermore, buildings of the three heights had an average overstrength 165.9% higher in Zone 1 than in Zone 4. These observations have a significant implications for the seismic design codes which currently do not take into account the variation of the response reduction factor, R (i.e., ductility reduction factor times overstrength).  相似文献   

Characterizing heterogeneous permeable media with spatial statistics and tracer data using sequential simulated annealing     

Akhil Datta-Gupta  Larry W. Lake  Gary A. Pope 《Mathematical Geology》1995,27(6):763-787

Characterizing heterogeneous permeable media using flow and transport data typically requires solution of an inverse problem. Such inverse problems are intensive computationally and may involve iterative procedures requiring many forward simulations of the flow and transport problem. Previous attempts have been limited mostly to flow data such as pressure transient (interference) tests using multiple observation wells. This paper discusses an approach to generating stochastic permeability fields conditioned to geologic data in the form of a vertical variogram derived from cores and logs as well as fluid flow and transport data, such as tracer concentration history, by sequential application of simulated annealing (SA). Thus, the method incorporates elements of geostatistics within the framework of inverse modeling. For tracer-transport calculations, we have used a semianalytic transit-time algorithm which is fast, accurate, and free of numerical dispersion. For steady velocity fields, we introduce a transit-time function which demonstrates the relative importance of data from different sources. The approach is illustrated by application to a set of spatial permeability measurements and tracer data from an experiment in the Antolini Sandstone, an eolian outcrop from northern Arizona. The results clearly reveal the importance of tracer data in reproducing the correlated features (channels) of the permeability field and the scale effects of heterogeneity.  相似文献   

Probabilistic seismic hazard zonation of Syria     

Abdallah I. Husein Malkawi  Robert Y. Liang  Jamal H. Nusairat  Azm S. Al-Homoud 《Natural Hazards》1995,12(2):139-151

Earthquake hazard maps for Syria are presented in this paper. The Peak Ground Acceleration (PGA) and the Modified Mercalli Intensity (MMI) on bedrock, both with 90% probability of not being exceeded during a life time of 50, 100 and 200 years, respectively are developed. The probabilistic PGA and MMI values are evaluated assuming linear sources (faults) as potential sources of future earthquakes. A new attenuation relationship for this region is developed. Ten distinctive faults of potential earthquakes are identified in and around Syria. The pertinent parameters of each fault, such as theb-parameter in the Gutenberg-Richter formula, the annual rate ₄ and the upper bound magnitudem ₁ are determined from two sets of seismic data: the historical earthquakes and the instrumentally recorded earthquake data (AD 1900–1992). The seismic hazard maps developed are intended for preliminary analysis of new designs and seismic check of existing civil engineering structures.  相似文献   

On some problems of seismic crustal phase     

葛焕称 《地震学报(英文版)》1995,8(1):57-63

ＯｎｓｏｍｅｐｒｏｂｌｅｍｓｏｆｓｅｉｓｍｉｃｃｒｕｓｔａｌｐｈａｓｅＨｕａｎ－ＣｈｅｎｇＧＥ（葛焕称）（ＳｅｉｓｍｏｌｏｇｉｃａｌＢｕｒｅａｕｏｆＪｉａｎｇｓｕＰｒｏｖｉｎｃｅ,Ｎａｎｊｉｎｇ２１００１４,Ｃｈｉｎａ）Ａｂｓｔｒａｃｔ：Ｉｎｔｈｉｓ...  相似文献   

微震仪有线传输避雷研究     

陈仲范  耿大伏 《华北地震科学》1995,13(4):70-74

本文通过对雷电放电分析,研究解决微震仪有线传输的避雷问题,并介绍接收雷电信号控制传输线上电荷对地短路的“ＤＢＬ－１”避雷仪。  相似文献   

合肥遥测台网地震速报系统     

刘东旺  黎捷 《地震地磁观测与研究》1995,16(6):27-34

论述了适用于遥测地震台网大震速报的一套计算机处理系统,系统设计以《全国遥测台网观测技术规范》和《近震分析》理论为依据,实现了数据输入,震相选择,数据处理,地震定位,震级计算,结果输出及贮存等多项功能,达到了快速确定地震三要素,提高速报速度和精度之目的,是一个较完善的,实用的速报系统。  相似文献   

综合利用地震多参数预测油气藏     

杨丙中  邓俊国 《吉林大学学报(地球科学版)》1990,(3)

以吉林省境内红星构造带(已发现油田)和杨柳青构造带(未发现油田)为试验区,首先利用地震地层学方法,研究间接参数特征,确定有利相带和有效圈闭,并在有效圈闭上选择了39个2×2cm时窗。在时窗内提取与地震波动力学有关的信息,即频率、振幅、频谱能量等,然后对这种信息进行统计计算,获得振幅方差等九个参数并对其进行综合分析,从已知油气藏出发,对未知圈闭油气状况进行了三级预测,指出了最有利的勘探靶区。  相似文献   

High-resolution shallow seismic identification of gas escape features in the sediments of Loch Tay, Scotland: tectonic and microbiological associations     

ROBERT W. DUCK  RODNEY A. HERBERT† 《Sedimentology》2006,53(3):481-493

High-resolution seismic reflection profiles (3·5 kHz) have revealed the presence of extensive interstitial gas accumulation within the sedimentary sequences of Loch Tay, Scotland, as identified by acoustic turbidity masking the seismic stratigraphy. Within the central section of the loch, in the deepest water area directly above the zone of the seismically active Loch Tay Fault, focused flows of gas through the sediment pile to the loch bed via chimneys and pockmarks, together with gas seeps within the water column, have been identified. Microbiological observations indicate that the gas is biogenic CH₄, produced by both chemoautotrophic (which use CO₂ as a source of carbon and H₂ as a source of energy) and aceticlastic species (which use acetate as a source of carbon and energy) of methanogens in the fine-grained, organic rich deposits that have been focused into the zone of accumulation in the deep central part of the loch. The spatial distribution of the gas escape features suggests that earthquake movements along the Loch Tay Fault are responsible for facilitating focused gas escape in this part of the loch, by the creation of new pathways and conduits through the sediment pile, along which gas can migrate upwards and exit into the water column. Relict pockmarks and associated chimneys identified in the seismic records indicate that gas escape has been taking place since Pleistocene times though the precise timings cannot be ascertained. This is the first time that such features have been reported from a lake in the UK.  相似文献   

Deep structure of the Nojima Fault, southwest Japan, estimated from borehole observations of fault-zone trapped waves   总被引：1，自引：0，他引：1  

Takashi Mizuno  Kin&#x;ya Nishigami 《Tectonophysics》2006,417(3-4):231-247

To estimate the deep structure of the southern part of the Nojima Fault, southwest Japan without the influence of near-surface structures, we analyzed the Love-wave-type fault-zone trapped waves (LTWs) recorded by a borehole seismometer at 1800 m depth. We examined the polarization, dispersion, and dominant frequency of the wavetrain following the direct S-wave in each seismogram to identify the LTW. We selected eight candidates for typical LTWs from 462 records. Because the duration of the LTW increases with hypocentral distance, we infer that the low velocity fault-zone of the Nojima Fault continues towards the seismogenic depth. In addition, since the duration of the LTW increases nonlinearly with hypocentral distance, we infer that the S-wave velocity of the fault-zone increases with depth. The location of events showing the LTW indicates that the fault-zone dips to the southeast at 75° and continues to a depth of approximately 10 km. We assumed a uniform low-velocity waveguide to estimate the average structure of the fault-zone. We estimated the average width, S-wave velocity, and Q_s of the fault-zone by comparing an analytical solution of the LTW with measured data. The average width, S-wave velocity, and Q_s of the fault-zone are 150 to 290 m, 2.5 to 3.2 km/s, and 40 to 90, respectively. Hence the fault-zone structure with a larger width and smaller velocity reduction than the fault-zone model estimated by previous surface observation is more suitable to represent the average fault-zone structure of the Nojima fault. The present study also indicated that the shallow layers and/or a shallow fault-zone structure drastically changes the characteristics of the LTW recorded at the surface, and therefore cause a discrepancy in the fault-zone model between the borehole observation and surface observation.  相似文献   

高新技术产业集聚的城市化响应与反馈机制研究   总被引：1，自引：0，他引：1  

毛广雄 《世界地理研究》2006,15(1):9-15

高新技术产业集聚与城市化存在互动机制。一方面,高新技术产业结构效应影响了城市化动力机制,集聚效应则促进了城市外部经济的发展,使城市化表现出不同的模式特征和地域特征;另一方面,城市化促进了高新技术发展所需要素资源的聚集与流动,为高新技术产业集聚提供人力资本保障,还为高新技术企业提供创新的源动力。文章以苏州高新区的高新技术产业发展和城市化互动关系佐证了这一理论,并认为建立二者之间切实可行的调控模式是当务之急。  相似文献