等高线拓扑关系的构建以及应用   总被引：9，自引：1，他引：9  

王涛  毋河海 《武汉大学学报(信息科学版)》2004,29(5):438-442

提出了等高线拓扑关系的描述框架 ,其规范化描述形式具有更强的适用性 ,使用三角网作为工具设计了建立拓扑关系的算法。以提出的拓扑关系描述为基础 ,具体实现了等高线高程自动赋值 ,处理过程可以同时考虑开曲线 (包括断线 )和闭曲线 ,提高了可靠性和自动化程度 ,并进一步将断线连接为完整目标 ,减少了人机交互的编辑工作  相似文献   

西安市冬季冷暖的历史演变对采暖的影响          下载免费PDF全文

庞文保 《山西气象》2005,(3):27-28

本文针对CAPPS2.0系统在业务化自动运行过程中的一些问题,提供了一套具体可行的解决方案,实现了CAPPS系统的全自动运行,具有很高的实用价值。  相似文献   

Establishment and application of an intelligent treating method for oil spill identification     

TAN Liju  ZHAO Ruxiang  YIN Xiaonan  ZHANG Haijiang  WANG Jiangtao 《海洋学报(英文版)》2018,37(11):116-122

In the identifying process of an oil spill accident, manual integral and artificial visual comparison are commonly used at present to determine the oil spill sources, these methods are time-consuming and easily affected by human factors. Therefore, it is difficult to achieve the purpose of rapid identification of an oil spill accident. In this paper, an intelligent method of automatic recognition, integration and calculation of diagnostic ratio of Gas Chromatography-Mass Spectrometer (GC/MS) spectrum are established. Firstly, four hundreds of samples collected around the world were analyzed using a standard method and Retention time locking technology (RTL) was applied to reduce the change of retention time of GC/MS spectrum. Secondly, the automatic identification, integration of n-alkanes, biomarker compounds, polycyclic aromatic hydrocarbons and calculation of the diagnostic ratios were realized by MATLAB software. Finally, a database of oil fingerprints were established and applied successfully in a spill oil accident. Based on the new method and database, we could acquire the diagnostic ratios of an oil sample and find out the suspected oil within a few minutes. This method and database can improve the efficiency in spilled oil identification.  相似文献   

Large‐scale poroelastic fractured reservoirs modeling using the fast multipole displacement discontinuity method          下载免费PDF全文

A. Verde  A. Ghassemi 《国际地质力学数值与分析法杂志》2016,40(6):865-886

An effective approach to modeling the geomechanical behavior of the network and its permeability variation is to use a poroelastic displacement discontinuity method (DDM). However, the approach becomes rather computationally intensive for an extensive system of cracks, particularly when considering coupled diffusion/deformation processes. This is because of additional unknowns and the need for time‐marching schemes for the numerical integration. The Fast Multipole Method (FMM) is a technique that can accelerate the solution of large fracture problems with linear complexity with the number of unknowns both in memory and CPU time. Previous works combining DDM and FMM for large‐scale problems have accounted only for elastic rocks, neglecting the fluid leak‐off from the fractures into the matrix and its influence on pore pressure and stress field. In this work we develop an efficient geomechanical model for large‐scale natural fracture networks in poroelastic reservoirs with fracture flow in response to injection and production operations. Accuracy and computational performance of the proposed method with those of conventional poroelastic DDM are compared through several case studies involving up to several tens of thousands of boundary elements. The results show the effectiveness of the FMM approach to successfully evaluate field‐scale problems for the design of exploitation strategies in unconventional geothermal and petroleum reservoirs. An example considering faults reveals the impact of reservoir compartmentalization because of sealing faults for both geomechanical and flow variables under elastic and poroelastic rocks. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Evaluating suspended sediment and turbidity reduction projects in a glacially conditioned catchment through dynamic regression and fluvial process-based modelling     

Kezhen Wang  Dany Davis  Scott Steinschneider 《水文研究》2021,35(9):e14351

Elevated turbidity (T_n) and suspended sediment concentrations (SSC) during and following flood events can degrade water supply quality and aquatic ecosystem integrity. Streams draining glacially conditioned mountainous terrain, such as those in the Catskill Mountains of New York State, are particularly susceptible to high levels of T_n and SSC sourced from erosional contact with glacial-related sediment. This study forwards a novel approach to evaluate the effectiveness of stream restoration best management practices (BMPs) meant to reduce stream T_n and SSC, and demonstrates the approach within the Stony Clove sub-basin of the Catskills, a water supply source for New York City. The proposed approach is designed to isolate BMP effects from natural trends in T_n and SSC caused by trends in discharge and shifts in average T_n or SSC per unit discharge (Q) following large flood events. We develop Dynamic Linear Models (DLMs) to quantify how T_n-Q and SSC-Q relationships change over time at monitoring stations upstream and downstream of BMPs within the Stony Clove and in three other sub-basins without BMPs, providing observational evidence of BMP effectiveness. A process-based model, the River Erosion Model, is then developed to simulate natural, hydrology-driven SSC-Q dynamics in the Stony Clove sub-basin (absent of BMP effects). We use DLMs to compare the modelled and observed SSC-Q dynamics and isolate the influence of the BMPs. Results suggest that observed reductions in SSC and T_n in the Stony Clove sub-basin have been driven by a combination of declining streamflow and the installed BMPs, confirming the utility of the BMPs for the monitored hydrologic conditions.  相似文献   

Sensitivity of soil parameters in unsaturated zone modelling and the relation between effective,laboratory and in situ estimates     

J. Mertens  H. Madsen  M. Kristensen  D. Jacques  J. Feyen 《水文研究》2005,19(8):1611-1633

Simulation of soil moisture content requires effective soil hydraulic parameters that are valid at the modelling scale. This study investigates how these parameters can be estimated by inverse modelling using soil moisture measurements at 25 locations at three different depths (at the surface, at 30 and 60 cm depth) on an 80 by 20 m hillslope. The study presents two global sensitivity analyses to investigate the sensitivity in simulated soil moisture content of the different hydraulic parameters used in a one‐dimensional unsaturated zone model based on Richards' equation. For estimation of the effective parameters the shuffled complex evolution algorithm is applied. These estimated parameters are compared to their measured laboratory and in situ equivalents. Soil hydraulic functions were estimated in the laboratory on 100 cm³ undisturbed soil cores collected at 115 locations situated in two horizons in three profile pits along the hillslope. Furthermore, in situ field saturated hydraulic conductivity was estimated at 120 locations using single‐ring pressure infiltrometer measurements. The sensitivity analysis of 13 soil physical parameters (saturated hydraulic conductivity (K_s), saturated moisture content (θ_s), residual moisture content (θ_r), inverse of the air‐entry value (α), van Genuchten shape parameter (n), Averjanov shape parameter (N) for both horizons, and depth (d) from surface to B horizon) in a two‐layer single column model showed that the parameter N is the least sensitive parameter. K_s of both horizons, θ_s of the A horizon and d were found to be the most sensitive parameters. Distributions over all locations of the effective parameters and the distributions of the estimated soil physical parameters from the undisturbed soil samples and the single‐ring pressure infiltrometer estimates were found significantly different at a 5% level for all parameters except for α of the A horizon and K_s and θ_s of the B horizon. Different reasons are discussed to explain these large differences. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

FBX三维模型自动转换为OBJ三维模型方法研究     

闻平  王冲  吴小东  桂林 《测绘与空间地理信息》2016,(1):113-115

本文研究实现了一种FBX三维模型自动转换为OBJ三维模型的方法,包括几何信息和材质信息的自动转换,所述方法包括获取数据、几何信息处理、材质信息处理、OBJ格式输出和材质库文件输出等步骤。  相似文献   

关于制作像控电子点之记方法与流程的探讨     

何云贵  茅琦  王智峰 《测绘与空间地理信息》2016,(9)

主要介绍电子点之记的制作流程及方法,以及所涉及的一些计算机软件和工序中可以自动化处理的程序,对于实现难点也进行了分析及说明,使像片控制测量点之记制作的流程更为简便,成果更为可靠。  相似文献   

浅谈国家1∶50000地形图更新制图方法及技巧     

郭健  李丽娜  吴琼 《测绘与空间地理信息》2016,(6)

为保持国家1∶50 000地形数据库的现势性,实现地形图制图数据库重点要素和全要素的快速更新,满足地形图快速输出与应急服务的需要,为国民经济建设与社会发展提供可靠的测绘保障。本文主要介绍利用1∶50 000动态更新数据库成果,分析工作要点及解决制图作业、检查难点。  相似文献   

专题地图数据库快速成图系统的研究     

谢岩  张平  金成范  刘聪坦 《测绘与空间地理信息》2016,(11)

针对吉林省专题地图的发展现状,详细地阐述了专题地图数据库快速出图系统的软件硬件配置、需求规定、运行模式、总体架构、地图缩编流程,以及数据库管理系统的功能设计,实现了不同区域、不同比例尺、不同内容的地图的快速整合和专题地图的快速生成。  相似文献