基于图像分割的成像测井资料目标拾取与计算          下载免费PDF全文

赵军  祁兴中  刘瑞林  钟广发 《地球物理学进展》2007,22(5):1502-1509

为了从FMI资料中提取定量信息,一个很重要的步骤就是要对FMI图像数据进行分割.即从实际FMI资料中分离出反映孔洞、裂缝的子图像,然后用相应的方法对分割后的子图像进行分析处理,提取相应参数.本文通过研究大量图像分割算法,认为奇异点多阈值分割算法、基于过度区的分割算法、Hopfield网络方法、基于图像间模糊散度的阈值化算法是FMI图像分割的有效方法,实现了从FMI图像中将地层中有用目标,从背景中分离出来.同时,为了得到孔洞及裂缝的形状参数,本文还研究了轮廓跟踪标识边缘的方法以及根据标识的边缘进行填充的算法.在此基础上,也研究了根据目标边缘坐标计算目标的长度、宽度、圆度、裂缝密度、孔洞密度等参数的方法.上述所有方法在SUN工作站GeoFrame平台上开发成功,通过对LX45等八口井的处理结果与岩心分析数据对比表明,效果较好.  相似文献   

机载激光雷达对青岛及周边海域的气溶胶探测   总被引：12，自引：1，他引：11       下载免费PDF全文

毛敏娟  张寅超  方海涛  戚福弟  邵石生  胡欢陵  周军 《地球物理学报》2007,50(2):370-376

工作波长为532 nm的机载大气环境探测激光雷达AEDAL（Atmospheric Environment Detecting Airborne Lidar）装载在CMS_3807飞机上,于2005年11月7～11日期间在青岛地区及周边海域上空进行了飞行探测.此次实验的目的有两个：验证我国用于大气环境探测的激光雷达技术已经具备从地基向空基乃至天基发展的条件;获得青岛地区及周边海域边界层结构及大气气溶胶时空分布变化的特点.激光雷达的高时空分辨率为获取飞行路径上的边界层结构及气溶胶时空分布提供了可能.为了研究下垫面对边界层及气溶胶时空分布的影响,预定的飞行路径上包含了丰富的地形变化,有城市、丘陵、海区等.通过给出11月8日及11日的探测结果,不仅得到了不同地区边界层结构及气溶胶的时空分布特点,还可以看到冷锋、地形、地面气象场等因素对它们的影响.  相似文献   

青藏高原近40年来的降水变化特征   总被引：28，自引：7，他引：21  

张磊  缪启龙 《干旱区地理》2007,30(2):240-246

利用我国青藏高原地区的1961-2000年56个气象站的逐月降水资料,通过计算降水量的距平百分率,分析了青藏高原自1961至2000年以来降水量变化的趋势和1961-2000年以来各季降水量变化趋势,发现:青藏高原近40年来降水量呈增加趋势,降水量的线性增长率约为1.12mm/a。再将高原划分为四个季节,分析了各季40年来的降水量的变化情况得出:春季降水量年际变化较大,秋季降水量变化不明显。夏季降水量值较大而降水变化幅度较小,冬季降水量变化则与夏季相反。通过将青藏高原分为南北两个地区,分析了两个区的年降水量和四个季节的降水量的变化得出:高原南区1961-2000年降水量呈增加的趋势,降水量的线增长率为1.97 mm/a,春季和冬季降水量年际变化较大,夏季降水量变化不明显,秋季降水量略有增加;北区年降水量和夏季的降水量变化较小,秋季降水量的年际变化较大,冬季降水量变化最大。对青藏高原的南北两区用Mann-Kendall方法进行突变分析,显示高原南区分别在1978年和1994年发生突变,北区没有发现突变。  相似文献   

Modeling 3D thermal fracture propagation by transient cooling using virtual multidimensional internal bonds          下载免费PDF全文

K. Huang  A. Ghassemi 《国际地质力学数值与分析法杂志》2016,40(17):2293-2311

Thermal fracturing can play an important role in development of unconventional petroleum and geothermal resources. Thermal fractures can result from the nonlinear deformation of the rock in response to thermal stress related to cold water injection as well as heating. Before the rock reaches the final failure stage, material softening and bulk modulus degradation can cause changes in the thermo‐mechanical properties of the solid. In order to capture this aspect of the rock fracture, a virtual multidimensional internal bond‐based thermo‐mechanical model is derived to track elastic, softening, and the failure stages of the rock in response to the temporal changes of its temperature field. The variations in thermo‐mechanical properties of the rock are derived from a nonlinear constitutive model. To represent the thermo‐mechanical behavior of pre‐existing fractures, the element partition method is employed. Using the model, numerical simulation of 3D thermal fracture propagation in brittle rock is carried out. Results of numerical simulations provide evidence of model verification and illustrate nonlinear thermal response and fracture development in rock under uniform cooling. In addition, fracture coalescence in a cluster of fractures under thermal stress is illustrated, and the process of thermal fracturing from a wellbore is captured. Results underscore the importance of thermal stress in reservoir stimulation and show the effectiveness of the model to predict 3D thermal fracturing. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Modeling three‐dimensional hydraulic fracture propagation using virtual multidimensional internal bonds     

K. Huang  Z. Zhang  Ahmad Ghassemi 《国际地质力学数值与分析法杂志》2013,37(13):2021-2038

Propagation of fractures, especially those emanating from wellbores and closed natural fractures, often involves Mode I and Mode II, and at times Mode III, posing significant challenges to its numerical simulation. When an embedded inclined fracture is subjected to compression, the fracture edge is constrained by the surrounding materials so that its true propagation pattern cannot be simulated by 2D models. In this article, a virtual multidimensional internal bond (VMIB) model is presented to simulate three‐dimensional (3D) fracture propagation. The VMIB model bridges the processes of macro fracture and micro bond rupture. The macro 3D constitutive relation in VMIB is derived from the 1D bond in the micro scale and is implemented in a 3D finite element method. To represent the contact and friction between fracture surfaces, a 3D element partition method is employed. The model is applied to simulate fracture propagation and coalescence in typical laboratory experiments and is used to analyze the propagation of an embedded fracture. Simulation results for single and multiple fractures illustrate 3D features of the tensile and compressive fracture propagation, especially the propagation of a Mode III fracture. The results match well with the experimental observation, suggesting that the presented method can capture the main features of 3D fracture propagation and coalescence. Moreover, by developing an algorithm for applying pressure on the fracture surfaces, propagation of a natural fracture is also simulated. The result illustrates an interesting and important phenomenon of Mode III fracture propagation, namely the fracture front segmentation. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

The role of eddies in solute transport and recovery in rock fractures: Implication for groundwater remediation          下载免费PDF全文

Seung Hyun Lee  In Wook Yeo  Kang‐Kun Lee  Won Sang Lee 《水文研究》2017,31(20):3580-3587

A better understanding of solute transport and retention mechanism in rock fractures has been challenging due to difficulty in their direct observations in microscale rough‐walled fractures. Six representative troughs in a rough‐walled fracture were selected for microscale observations of eddy formation with increasing flow velocity and its effect on spatiotemporal changes of solute concentration. This experimental study was enabled by a microscale visualization technique of micro particle image velocimetry. With increasing flow velocity (Re ≤ 2.86), no eddies were generated, and solutes along the main streamlines transported rapidly, whereas those near the wall moved slowly. A larger amount of solutes remained trapped at all troughs at Re = 2.86 than Re < 1. For Re = 8.57, weak eddies started to be developed at the troughs on the lee side, which little contributed to overall solute flushing in the fracture. Accordingly, a large of amount of water was needed for solute flushing. The flow condition of 1 < Re < 10, before a full development of eddies, was least favourable in terms of time and amount of remediation fluid required to reach a target concentration. After large eddies were fully developed at troughs on the lee side for Re = 17.13, solutes were substantially reduced by eddies with less amount of water. Fully developed eddies were found to enhance solute transport and recovery, as opposed to a general consensus that eddies trap and delay solutes. Direct inflow into troughs on the stoss side also made a great contribution to solute flushing out of the troughs. This study indicates that fully developed eddies or strong inflows at troughs are highly possible to form for Re > 10 and this flow range could be favourable for efficient remediation.  相似文献   

上海及其邻区潜在地质灾害的构造背景与成因机理     

高灯亮  沈爱君 《上海国土资源》1990,(2):1-8

本文基于上海及其邻区活动断裂构造及有关地区潜在地质灾害特点的研究,论证了上海及其邻区潜在地质灾害的三种基本类型及其构造背景与成因机理;指出:上海及其邻区楔形断裂系统的存在与活动是诱发有关地区潜在地质灾害的主导因素。文中明确指出了上海及其邻区楔形断裂系统的研究在相关地区进行潜在地质灾害评价与预测方面的应用前景与发展方向。  相似文献   

An empirical approach to estimating population parameters from censored fracture-length distributions   总被引：1，自引：0，他引：1  

Pascal de Caprariis 《Mathematical Geology》1988,20(7):803-814

Most fracture data sets are length-censored because of incomplete exposure at the surface, so estimating values of parameters of the sampled populations is difficult. Unless the form of the distribution function of the population is known, or one which is analytically tractable is assumed, length-censoring presents formidable problems in determining population parameters. Tests conducted on experimental fracture patterns developed in clay samples subjected to simple shear loading are the basis of a distribution-free way to estimate population parameters. Comparison of random samples of censored and uncensored fracture lengths shows that a useful, homogeneous data set consists of those cracks which lie entirely within the sampling area (two-ended cracks). The properties of this data set can be used to estimate the mean and variance of uncensored data. Estimates of the maximum fracture length of uncensored data, using the variance and maximum length of these two-ended cracks, show good agreement with measured values. Knowledge of the mean, variance, and maximum value of fracture-length populations are of interest in engineering and hydraulic studies, as well as in remote sensing studies of the Earth and other planets. Application of these results to data on rock masses are subject to the caveat that different crack-growth mechanisms in clay and rock may affect the accuracy of the calculations.  相似文献   

渤海陆缘地震的力学特征和成因   总被引：5，自引：1，他引：5  

张之立  邓玉琼 《地球物理学报》1989,32(4):470-477

渤海陆缘是华北强震活动区,如1966年的邢台震群,1967年的河间地震,1969年的渤海地震,1975年的海城地震,1976年的唐山震群和1983年的菏泽地震,都是在该区发生的。显然,深入研究该地区的构造运动和地震成因是有重要科学意义的。本文拟从应力场角度进行研究。  相似文献   

Fractal reconstruction of sea-floor topography     

Jean-Claude Mareschal 《Pure and Applied Geophysics》1989,131(1-2):197-210

Sea-floor bathymetric profiles exhibit features at many different scales of length; this suggests that they could be described as fractals. An algorithm interpolating a fractal line between points has been used to reconstruct bathymetric profiles from a few data points. In general, this fractal line has the same Fourier amplitude spectrum as real bathymetry, and, if the parameters of the interpolation are suitably chosen, it has a very similar appearance. The success of this fractal reconstruction algorithm for the sea-floor raises the possibility that it could be used to extrapolate, from data collected at one scale, the properties of the sea-floor at finer scales, and that similar techniques could be used to interpolate a surface between bathymetric profiles. The fractal character is a sign that the processes that shape the sea-floor are scale invariant and suggests that the renormalization group technique could be used to model these processes.  相似文献