小浪底水库断裂构造分析与诱发地震预测   总被引：2，自引：0，他引：2  

贺为民  刘明军  李智毅  唐辉明  赵丽 《华南地震》2001,21(1):63-68

对小浪底水库区城崖地，塔底，石井河等主要活动断层的基本特征作了 简要介绍，采用断层强度分析法分别估算了小浪底水库蓄水前和一些断层面的抗滑稳定系数，对库区地震活动性，应力状态，岩溶和岩体渗透性等诱震条件进行了分析，对水库诱发地震的最大震级和可能的震中位置进行了初步预测。  相似文献   

莺歌海盆地晚第三纪构造特征的三维泥料模拟实验及其动力学意义   总被引：5，自引：0，他引：5       下载免费PDF全文

殷秀兰  李思田等 《地质论评》2001,47(5):535-541

莺歌海盆地是发育在古红河断裂带之上的新生代盆地，晚第三纪的构造运动触发了盆地中热流体自超压封存箱向外大规模突破，使热流体及泥质的活动具有规律性成群成带的特征。本次实验基于相似理论，在对盆地的演化史及区域构造应力场充分分析的基础上，进行了晚第三纪盆地构造应力场的三维泥料模拟，证实了红河断裂右旋走滑派生的拉分效应控制了莺歌海盆地晚第三纪的构造活动，而晚第三纪的构造活动又是雁列式断裂展布及底辟体分布的主导因素。  相似文献   

Scaling of fracture length and distributed damage     

Vladimir Lyakhovsky 《Geophysical Journal International》2001,144(1):114-122

  相似文献   

成像光谱图像的噪声分析与消除方法研究--以北京顺义区成像光谱图像为例     

姜小光  王长耀  王成 《干旱区地理》2001,24(1):9-14

以北京顺义区32通道成像光谱数据为例，从数据的统计参数入手，分别从数据的方差、动态范围、相关性、直方图等方面分析研究噪声及特点，在此基础上提高局部邻域自动噪声查找与消除算法。  相似文献   

煤矿采空区钻孔注浆治理工艺   总被引：6，自引：0，他引：6  

任红旗 《中国煤田地质》2001,13(2):102-103

钻孔注浆充填固结处理煤矿采空区塌陷是一种经济快捷的有效方法，本文就其施工工艺方法进行了简单分析，期望能为其它类似工程提供参考。  相似文献   

江苏溧阳地震孕育和发生的地质因素剖析     

胡连英  徐学思 《江苏地质》2001,25(1):11-16

研究和剖析了两次溧阳地震孕育和发生的主要地质因素，新生代茅东裂陷盆地；茅东与南京－溧阳两玄武岩喷发带的交汇；茅东断裂带最活动的上沛带；震源区地壳层圈构造（深、浅变质岩界面和低速层）与茅东部断裂带中、深脆－韧性剪切段的复合。探讨了控制溧阳震震级的因素；茅东断裂带属Ⅱ级断裂，茅东裂陷盆地属中、小型裂陷盆地，因此，决定溧阳地震震级为5．0－6．0的中强地震。  相似文献   

利用煤层裂隙地震各向异性寻找煤层气气藏   总被引：5，自引：0，他引：5  

柳楣  匀精为等 《中国煤田地质》2001,13(3):57-58,66

煤层气是以吸附状态储集在煤层的微裂隙、裂缝中，煤层既是煤气的源岩层，也是煤层气的储集层。由于煤层裂隙的存在，将导致煤层的各向异性；根据横波分裂理论：横波通过方位各向异性介质时，横波将发生分裂现象，分裂为两个偏振方向近乎正交的横波，即传播方向平行于裂隙方向的快横波和传播方向垂直于裂隙方向的慢横波。本文介绍了煤层裂隙引起的横波分裂现象的实验室研究及实际野外试验成果。实际结果表明，利用转换横波探测煤层裂隙是可行的。本文最后给出了试验煤层裂隙发育范围和裂隙发育方向。  相似文献   

裂缝性边水油气藏水侵量计算方法     

杨宇  冯文光  宋传真 《矿物岩石》2001,21(4):79-81

水侵量求取一直是困扰油藏工程师的一个问题，其中,裂缝性边水水侵量的计算还没有一个公开的有效方法。本文试根据不稳定渗流模型，提出裂缝性边水水侵量的新计算方法。  相似文献   

Broadband synthetic aperture borehole radar interferometry   总被引：1，自引：0，他引：1  

I. Mason  N. Osman  Q. Liu  C. Simmat  M. Li 《Journal of Applied Geophysics》2001,47(3-4)

Trials in mines have established that wideband VHF borehole radars (BHR), working in the 10–100-MHz band, can be used to probe the rockmass between boreholes over ranges from <5 m to as much as 150 m with submeter resolution. There is evidence that ore bodies reflect these radar signals both specularly and diffusely, much as the ground/air interface does when overflown by synthetic aperture radar (SAR). In both SAR and BHR, multiple flight lines, together with diffuse reflections admit the possibility of developing interferometric 3D images of the object. This paper examines the possibility of imaging buried objects in three dimensions by interferometrically combining broadband VHF borehole radar profiles shot in adjacent pairs of boreholes. Broadbanding in BHR has the advantage of releasing the image from 2nπ phase ambiguities, but practically, interferometric borehole radar (InBHR) needs high signal-to-noise ratios (SNR) to avoid noise capture. This means that 3D InBHR is limited to ranges in wavelengths which are less than the rock's attenuation factor Q. Interferometric methods are developed which are capable of mapping ore bodies and other structures in three dimensions. Tangent plane migration methods are developed here in order to reconstruct surfaces that lie in the near-field of sparse interferometric arrays.  相似文献   

Study on the sources of some deep focus earthquakes in Northwest Pacific region     

An-Yi Li  Shao-Xian Zang 《地震学报(英文版)》1996,9(1):23-31

The sources for thirteen deep focus earthquakes ofm _b≥5.5 andh>400 km in Northwest Pacific region were studied using waveform fitting and shear fracture source model. The source parameters were obtained as follows: focal depth, faulting plane, slip direction, rupture velocity, rupture length, rupture direction and scalar moment tensor. It was found that all these earthquake sources can be interpreted as shear faulting and have simple source time functions. The strike direction of faulting plane for most deep focus earthquakes coincides with that of the subduction zone, especially in the deep part of the subduction zone, it results in the tendency of reducing the dip angle of the subduction zone. The multiple point source model was also used to study the source process. The waveform fitting is better than the shear fracture model, but the general rupture direction which coincides with that from unilateral shear source model can not be obtained from the multiple point source model. This study is supported by the National Science Foundation of China and the Chinese Joint Seismological Science Foundation.  相似文献