阿拉伯海热带气旋生成特征分析          下载免费PDF全文

李畅  姜霞  沈新勇 《海洋气象学报》2021,41(4):62-72

利用印度气象局（India Meteorological Department,IMD）、国际气候管理最佳路径档案库（International Best Track Archive for Climate Stewardship,IBTrACS）提供的1982—2020年阿拉伯海热带气旋路径资料,美国国家环境预报中心（National Centers for Environmental Prediction,NCEP）再分析资料,对近39 a阿拉伯海热带气旋源地和路径特征、活跃区域、频数及气旋累积能量（accumulated cyclone energy,ACE）指数的季节特征和年际变化特征进行分析,并结合环境因素,说明其物理成因。结果表明：阿拉伯海热带气旋多发于10°~25°N,65°~75°E海域,5—6月、9—12月发生频数较高且强度较强,1—4月、7—8月发生频数较低且气旋近中心最大风速均小于35 kn;频数的季节变化主要受控于垂直风切变要素;阿拉伯海热带气旋发生频数和ACE近年有上升趋势,年际变化主要受控于海面温度（sea surface temperature,SST）和850 hPa相对湿度要素。  相似文献   

COMPARATIVE STUDY ON THE SEISMIC RETROFIT OF A MID-RISE STEEL BUILDING: STEEL BRACING VS ENERGY DISSIPATION     

ARTURO TENA-COLUNGA  ALEJANDRO VERGARA 《地震工程与结构动力学》1997,26(6):637-655

The paper presents a comparative study of an existing retrofit for a mid-rise steel building using additional stiff steel braced-frames against an alternate retrofit using ADAS (Added Damping and Stiffness) passive energy dissipation devices. The subject building, located near Alameda Park in downtown Mexico City, is a ten-storey office building that was built in the 1950s. The structure was damaged during the 1985 Michoacán Earthquake because of resonant response with the site. The building was later retrofitted using additional braced frames according to the seismic provisions of Mexico's 1987 Federal District Code. The retrofit scheme was planned to take the structure away from resonant responses and to inhibit structural damage. A proposed upgrade using ADAS energy dissipation devices was studied to compare energy dissipation against traditional stiffening using steel braces as retrofit options for mid-rise buildings in Mexico City's lake-bed zone. Different sets of analyses were carried out to compare both alternatives: (a) three-dimensional elastic analyses; (b) limit analyses and; (c) nonlinear dynamic analyses for postulated site ground motions for a M_s=8.1 earthquake. Initial costs of the retrofit schemes were also studied. The comparative studies suggest that a retrofit using ADAS devices would have a better dynamic performance than the one using steel braces. However, the steel bracing retrofit provides more strength and its initial cost of retrofit is less than that of the ADAS retrofit. © 1997 John Wiley & Sons, Ltd.  相似文献   

应用混合变量最小势能原理求解有一个悬空角点弹性矩形薄板的稳定     

陈英杰  刘春辉  李威  付宝连 《世界地震工程》2005,21(2):90-98

x将混合变量的最小势能原理推广到求解弹性矩形薄板的稳定问题中,求解了有一个悬空角点弹性矩形薄板的稳定问题,并给出了相应问题确定临界载荷的特征方程及计算结果,为工程中薄板的设计计算提供了有效的参考,尤其是对现代建筑和桥梁中的受压构件的稳定设计和计算提供了一个简捷有效的计算方法。通过文中计算表明,混合变量的最小势能原理适用于有一个悬空角点矩形板稳定问题的求解,从而验证了它用于薄板稳定问题的一般性和通用性。  相似文献   

地震动输入界面的选取对深软场地地震效应的影响   总被引：4，自引：0，他引：4  

陈国兴  陈继华 《世界地震工程》2005,21(2):36-43

以天津和上海两个典型的深厚软弱场地为研究背景,探讨了地震动输入界面对场地地表地震动参数的影响。对于场地1(天津)和场地2(上海),分别选择7个和8个剪切波速(υs)大小不同的土层位置作为地震动输入界面,并选用Taft、Northridge地震加速度记录和南京人工波作为输入地震动,将Taft波、Northridge波和南京人工波的加速度峰值水平调整为0．35m／s^2、0．70m／s^2和0．98m／s^2,用SHAKE91程序对这两个场地进行了不同的地震动输入界面、输入地震波和峰值加速度水平的128种组合的场地地震反应分析。与从假想基岩面(υs≥500m／s)输入地震动的结果(假想的实际值)相比,可得到如下结论：(1)随着地震动输入界面深度(剪切波速)的增加,场地地表加速度反应谱逐渐地向实际值接近;(2)地震动输入界面的深度相同时,地震动加速度峰值水平越高,两者的加速度反应谱谱值的相对差异也越大;(3)对于一般建筑物,可以把剪切波速为400m／s左右的土层作为地震动输入界面;对于中长周期的建筑物,则应慎重选择地震动输入界面,最好选取υs≥500m／s^2的土层或基岩面作为地震动输入界面。  相似文献   

地震地面运动能量分析的新方法--小波变换     

肖梅玲  高春涛  叶燎原 《世界地震工程》2005,21(3):97-99

从小波变换的基本原理出发,利用小波能量特性及正交特性,根据加速度记录推导出小波变换下的地震地面运动的能量时程公式,通过小波变换后求得的能量同时包括了地震动时域和频域内的能量,而且这种方法从理论上是可行,从方法实现上也是比较简单的。  相似文献   

能坡法流量实时在线自动监测系统在沈丘水文站的应用     

韩新庆 《水文》2017,37(1):79-82

能坡法流量实时在线自动监测系统结合计算机处理、网络数据传输等先进技术,可以将常规的水文要素监测方式转变为信息采集、存贮、传输运用为一体的自动化、数字化过程。通过该系统在沈丘水文站的应用,与流速仪法测流进行对比分析,从而验证了能坡法流量实时在线自动监测系统的可靠性与合理性。  相似文献   

探秘“能源新星”——干热岩          下载免费PDF全文

王文  吴纪修  施山山  李小洋 《探矿工程》2020,47(3):88-93

干热岩是近些年逐渐发展起来的清洁能源,指埋藏于地球表面3000 m以深,不含或含少量水或蒸汽等流体,温度在180 ℃以上且渗透率极低的岩体。对干热岩的应用主要是建立增强型地热系统进行发电。目前对干热岩的研究尚处于起步阶段,干热岩的热源、热储、形成机理、埋藏机制等都未形成完整的理论体系,干热岩的开发过程也面临诸如储层改造、高温钻探以及随钻监测等一系列的技术“瓶颈”。干热岩资源储量大,开发利用过程低碳环保、节能高效,是国际社会公认的优质清洁能源,但是干热岩研究程度低,开发难度大,需要不断的知识积累和技术积累。本文从科普的角度列举了干热岩的相关研究现状及存在的问题,以期能让更多的人对这一“能源新星”加深了解。  相似文献   

基于钻进状态监测的智能工况识别          下载免费PDF全文

范海鹏  吴敏  曹卫华  赖旭芝  陈略峰  陆承达 《探矿工程》2020,47(4):106-113

钻进过程状态监测旨在实时描述钻进工况,判断运行性能优劣程度进行非优追溯,及时指导司钻人员调整作业操作,保证钻进过程安全、高效、稳定开展。钻进工况是钻进系统运行状态的反映,因此开展面向状态监测技术的钻进工况识别研究具有重要的理论和应用价值。本文针对钻进工况识别问题,基于状态监测数据,建立基于支持向量机的钻进工况识别模型,对钻进工况进行识别。综合工况识别结果,对钻进效率进行评估,并对影响钻进效率的因素进行讨论,寻找提升钻进效率的手段。最后,采用钻进现场实钻数据进行仿真实验,验证所提方法的可行性和有效性。  相似文献   

Adsorption Mechanism and Kinetic Characterization of Bituminous Coal under High Temperatures and Pressures in the Linxing‐Shenfu Area     

TAO Chuanqi  WANG Yanbin  LI Yong  NI Xiaoming  GAO Xiangdong 《《地质学报》英文版》2020,94(2):399-408

The majority of coalbed methane(CBM) in coal reservoirs is in adsorption states in coal matrix pores. To reveal the adsorption behavior of bituminous coal under high-temperature and high-pressure conditions and to discuss the microscopic control mechanism affecting the adsorption characteristics, isothermal adsorption experiments under hightemperature and high-pressure conditions, low-temperature liquid nitrogen adsorption-desorption experiments and CO2 adsorption experiments were performed on coal samples. Results show that the adsorption capacity of coal is comprehensively controlled by the maximum vitrinite reflectance(Ro, max), as well as temperature and pressure conditions. As the vitrinite reflectance increases, the adsorption capacity of coal increases. At low pressures, the pressure has a significant effect on the positive effect of adsorption, but the effect of temperature is relatively weak. As the pressure increases, the effect of temperature on the negative effect of adsorption gradually becomes apparent, and the influence of pressure gradually decreases. Considering pore volumes of pores with diameters of 1.7-100 nm, the peak volume of pores with diameters 10-100 nm is higher than that from pores with diameters 1.7-10 nm, especially for pores with diameters of 40-60 nm, indicating that pores with diameters of 10-100 nm are the main contributors to the pore volume. The pore specific surface area shows multiple peaks, and the peak value appears for pore diameters of 2-3 nm, indicating that this pore diameter is the main contributor to the specific surface area. For pore diameters of 0.489-1.083 nm, the pore size distribution is bimodal, with peak values at 0.56-0.62 nm and 0.82-0.88 nm. The adsorption capability of the coal reservoir depends on the development degree of the supermicroporous specific surface area, because the supermicroporous pores are the main contributors to the specific pore area. Additionally, the adsorption space increases as the adsorption equilibrium pressure increases. Under the same pressure, as the maximum vitrinite reflectance increases, the adsorption space increases. In addition, the cumulative reduction in the surface free energy increases as the maximum vitrinite reflectance increases. Furthermore, as the pressure increases, the surface free energy of each pressure point gradually decreases, indicating that as the pressure increases, it is increasingly difficult to adsorb methane molecules.  相似文献   

中国深层地热能开采的地质条件评价     

庞忠和  罗霁  程远志  段忠丰  天娇  孔彦龙  李义曼  胡圣标  汪集旸 《地学前缘》2020,27(1):134-151

深层地热能是指深度大于3 000 m的地热能。我国深层地热能资源丰富,但是开采条件怎么样呢?本文基于地热地质学原理,结合岩石力学等相关学科的理论,提出一种对深层地热能开采条件进行评价的指标体系,对各单一指标采用专家打分的方法赋值,继而采用模糊数学定量计算和评估深层地热能资源开发的难易程度。该方法考虑了深层地热能开发利用中的增强地热系统(EGS)的环境安全问题,即传统的“刚性造储”可能带来的诱发地震等不利于地热能行业健康发展的因素,倡导“柔性造储”和广义EGS理念,强调储层属性和地物理场的整合,针对我国地热能分布与构造活动关系密切、地壳总体上活动性强、地应力高、地震频发等构造型地热特点,是对以往评价方法的补充和拓展。该方法充分利用了专家知识,发挥了模糊数学综合评估作用,给出的量化结果易于对比和使用,可以更好地支持决策。本文基于新的评估方法,利用现有的深部地热研究及勘探成果,评估了中国大陆地区九个区域深层地热能开发的难易程度,评价区包括西藏南北地堑系、云南西部火山型地热区、青海东部共和盆地以及东北、华北等。从本文的结果可以看出,我国深层地热能开采的地质条件复杂,开采难度较大。  相似文献