软土地基上静压预制桩承载力的工后增大效应     

肖军华  韩爱民 《江苏地质》2003,27(4):233-236

分析了软土地基上预制桩承载力的时效性机理，介绍了几种研究承载力时效性的经验回归公式，结合工程说明应充分认识承载力时效性的科学性和利用这种规律潜在的巨大经济效益。  相似文献   

间层矿物的结构参数与分类探讨     

刘灵燕  肖金凯  张澄博 《矿物学报》2003,23(3):245-249

从间层的概念出发，对四个间层结构参数的定义和意义进行总结，并根据间层矿物的结构和组成对其进行了分类探讨。首先根据晶层种类将间层矿物分为同类结构基元间层矿物和异类结构基元间层矿物两大类，然后根据变差系数划分出规则间层矿物和不规则间层矿物，最后根据间层比、连接概率等特征划分出有序间层、无序间层和带状间层。  相似文献   

软土结构性破损的孔径分布试验研究   总被引：6，自引：1，他引：6  

吕海波  汪稔  赵艳林  孔令伟 《岩土力学》2003,24(4):573-578

采用压汞法对天然结构性软土压缩过程孔隙大小分布的演化进行了试验研究，结果表明，当荷载超过结构屈服应力后，尺寸较大的团粒间孔隙首先发生破坏，随着荷载的增大，越来越小的孔隙受到影响，但团粒内孔隙在压缩过程中不发生变化；根据试验结果提出了孔隙结构破损势的概念，并用其表征孔隙分布随荷载变化的规律。  相似文献   

国外漂白粘土和澄清粘土的产销现状综述   总被引：1，自引：0，他引：1  

孟翠鸣 《化工矿产地质》2003,25(2):110-114,122

漂白粘土和澄清粘土应具有较大的表面积、较高的吸附性能及褪色能力,多由膨润土经活化(酸化)处理后制成。当前,德国、美国在世界漂白土生产中占据重要地位。漂白粘土和澄清粘土世界市场销量约86万t/a,其中70％～80％用于食用油和油脂工业。漂白粘土的发展受食用油工业发展的影响最大,亚洲还有较大的发展空间。澄清粘土多用作葡萄酒、果汁等的澄清剂,也有一定的发展前景。漂白土再利用的途径,仍在探索中。  相似文献   

深厚软土中超大型“悬浮”基坑水泥土重力式挡土墙位移控制措施     

陈学文 《湖南地质》2003,22(1):51-53,57

本文就珠海某基坑水泥土重力式挡土墙的位移及其控制进行分析探讨，论述了应用轻型钢管支撑对基坑位移控制的可行性，并详细阐述了其计算方法及施工工艺。  相似文献   

桂林地区红土砾石层的工程地质特征及其应用   总被引：1，自引：1，他引：1  

牟春梅 《工程地质学报》2003,11(2):186-188

桂林地区的红土砾石层以其独特的工程地质特征引起了许多中外学者的注意, 对它的成因至今还存在争议。本文主要讨论红土砾石层的工程应用, 即不仅可作为一般低层建筑物的天然持力层, 而且可以作为沟、塘等低洼地带的回填土料 ;而且厚度较大的红土砾石层坚硬部分可作为桩端持力层。  相似文献   

南华北地区石炭-二叠系砂岩和泥岩中粘土矿物的形成与转化   总被引：2，自引：0，他引：2  

管俊芳  陆琦  陈林丽  雷新荣 《西北地质》2003,36(1):74-77

区内砂岩中的粘土矿物主要是自生的高岭石、绿泥石和伊蒙混层，而泥岩中的粘土矿物是伊蒙混层和高岭石，少量绿泥石。未见蒙脱石。砂岩和泥岩中粘土矿物的转化具有相似的水介质和地温条件，都反映出在中—晚成岩期形成，而且与烃类的排出和运移密切相关。泥岩中粘土矿物转化和脱水作用为砂岩输送流体和释放溶解物质。而且泥岩中有机质的脱羟基向砂输送酸性水，促进砂岩中骨架颗粒溶解、次生孔隙的产生。  相似文献   

Exploration and discovery in Yellowstone Lake: results from high-resolution sonar imaging, seismic reflection profiling, and submersible studies     

L. A. Morgan  W. C. Shanks  III  D. A. Lovalvo  S. Y. Johnson  W. J. Stephenson  K. L. Pierce  S. S. Harlan  C. A. Finn  G. Lee  M. Webring  B. Schulze  J. Dühn  R. Sweeney  L. Balistrieri 《Journal of Volcanology and Geothermal Research》2003,122(3-4):221-242

‘No portion of the American continent is perhaps so rich in wonders as the Yellow Stone’ (F.V. Hayden, September 2, 1874)Discoveries from multi-beam sonar mapping and seismic reflection surveys of the northern, central, and West Thumb basins of Yellowstone Lake provide new insight into the extent of post-collapse volcanism and active hydrothermal processes occurring in a large lake environment above a large magma chamber. Yellowstone Lake has an irregular bottom covered with dozens of features directly related to hydrothermal, tectonic, volcanic, and sedimentary processes. Detailed bathymetric, seismic reflection, and magnetic evidence reveals that rhyolitic lava flows underlie much of Yellowstone Lake and exert fundamental control on lake bathymetry and localization of hydrothermal activity. Many previously unknown features have been identified and include over 250 hydrothermal vents, several very large (>500 m diameter) hydrothermal explosion craters, many small hydrothermal vent craters (1–200 m diameter), domed lacustrine sediments related to hydrothermal activity, elongate fissures cutting post-glacial sediments, siliceous hydrothermal spire structures, sublacustrine landslide deposits, submerged former shorelines, and a recently active graben. Sampling and observations with a submersible remotely operated vehicle confirm and extend our understanding of the identified features. Faults, fissures, hydrothermally inflated domal structures, hydrothermal explosion craters, and sublacustrine landslides constitute potentially significant geologic hazards. Toxic elements derived from hydrothermal processes also may significantly affect the Yellowstone ecosystem.  相似文献   

鄱阳湖组(第四系)的修订及特征   总被引：3，自引：0，他引：3  

马振兴  蒋玉珍  魏源  李均辉  李长安 《地层学杂志》2003,27(3):212-215

根据对鄱阳湖地区 Zk0 1钻孔柱状剖面的研究 ,对鄱阳湖组的定义进行修订、补充 ,认为鄱阳湖组为一套以青灰色淤泥质粘土、黄褐色粘土、粉质粉土为主夹少量粉砂或细砂的湖泊—河口三角洲相沉积。年代地层为第四系全新统 ,底界年龄约 6 2 10± 12 5 a B.P.,开阔湖泊沉积始于 32 4 0± 180 a B.P.,且由北向南时代渐新 ,具有明显的穿时性  相似文献   

The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada     

Carl L. Amos  Ian G. Droppo  Eduardo A. Gomez  Tom P. Murphy 《Sedimentology》2003,50(1):149-168

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.  相似文献