大庆头台地区扶余油层无效缝的形成与分布   总被引：1，自引：0，他引：1  

陈建文 《地学前缘》2000,7(4):391-402

:在研究大庆头台地区扶余油层微裂缝的基础上给出了无效缝的概念 ,从研究与无效缝形成有关的成岩作用入手 ,研究了成岩作用中的演化及无效缝的形成 ,论述了微裂缝形成期次、成藏期、次生矿物作用及无效缝形成期次的匹配关系。阐述了无效缝的形成机理、影响因素及在扶余油层中的分布特征。通过对无效缝的研究 ,揭示了无效缝的形成与发展对大庆头台地区扶余油层产油能力和储油能力的影响。本研究对特低渗透裂缝型油田的开发具有一定的指导意义。  相似文献   

A palaeomagnetic study of fracture fills in the Holy Cross Mountains of Central Poland and its application in dating tectonic processes     

Marek Lewandowski 《Geophysical Journal International》1999,137(3):783-792

Calcite and sedimentary fills in fractures cutting the Upper Devonian carbonates in the Holy Cross Mountains (HCM) were dated palaeomagnetically by comparison with the apparent polar wander path (APWP). Haematite-bearing calcite possessed well-defined components of natural remanent magnetization (NRM), which were preserved under thermal demagnetization to temperatures of approximately 500 °C, when specimens disintegrated. Although not completely demagnetized, some specimens revealed a stable NRM component before destruction, thus making a component analysis possible. Five components were determined using density point distribution and cluster analysis. One has a mean that is similar to the present-day local geomagnetic vector. The remaining four components yielded palaeomagnetic poles located at: A (70.3°S, 5.5°E), B (71.3°S, 31.2°E), C (48.7°S, 351.0°E, virtual geomagnetic pole), and D (11.6°S, 312.3°E). Antipodal polarities found in the fracture fills, together with dissimilarities in magnetization found in calcite and hosting carbonates, indicate the lack of simultaneous remagnetization, and different times of remanence acquisition for the rocks under comparison. Taking both palaeomagnetically inferred palaeolatitudes and regional tectonics into consideration, a Mesozoic (Cretaceous?) age is estimated for palaeopoles A and B, a Permian age for pole C, and a Carboniferous age for pole D. These age determinations are in line with the calcite ages estimated from isotopic studies. A comparative palaeomagnetic study performed on a well-dated Upper Devonian neptunian dyke of limestone and a Lower Triassic clastic vein yielded virtual geomagnetic poles (VGPs) close to the APWP for Baltica. Generally, the remanence from fracture fills may be useful for dating related tectonics, karst phenomena and mineralization processes.  相似文献   

Pahoehoe toe dimensions, morphology, and branching relationships at Mauna Ulu, Kilauea Volcano, Hawai'i     

David A. Crown  Stephen M. Baloga 《Bulletin of Volcanology》1999,61(5):288-305

 Pahoehoe toe dimensions, morphology, and branching relationships were analyzed in flows emplaced during 1972 at Mauna Ulu, a satellitic shield on the east rift zone of Kilauea Volcano, Hawai'i. In order to characterize regions within flow fields dominated by networks of pahoehoe toes, measurements of toe length, width, thickness, and orientation were completed for 445 toes at 13 sites. Variations in site characteristics, including slope, substrate, and position in the flow field allow an evaluation of the effects of such parameters on toe dimensions. Toe surface morphology (ropy or smooth), local flow lobe position (interior or margin), and connective relationships between toes were documented in the form of detailed toe maps. These maps show the number of branches connecting a given toe to other toes in its local pahoehoe network and illustrate branching patterns. Statistical analyses of toe dimensions and comparisons of pahoehoe toe study sites and sub-populations combined with field observations, evaluation of toe maps, and qualitative examination of toe dimension size distributions show the following: (a) Although there are significant variations at a given site, toes typically have mean lengths (101 cm) greater than mean widths (74 cm) and mean widths greater than mean thicknesses (19 cm); sites that have mean widths greater than mean lengths are those with lower slopes. (b) Where significant site-to-site variations in mean values of a given toe dimension were apparent, these differences could not be directly related to site characteristics. (c) Ropy toes have significantly larger mean values of length, width, and number of branches than smooth toes, and toes with three or more branches have greater lengths, widths, and thicknesses than toes with two or fewer branches, suggesting concentration of flow in these toe types. (d) The skewness of all size distributions of toe length and width to larger values suggests that toes are transitional to larger sheets and channels, consistent with field observations; and (e) Two distinct types of branching patterns (called monolayer and centrally ridged) were observed in preserved pahoehoe flow lobes. The significant variability in measured toe dimensions at Mauna Ulu suggests that toe dimensions are influenced by numerous locally defined, random factors, and that an approach based on stochastic methods can be used to model pahoehoe flow emplacement. Received: 19 January 1998 / Accepted: 24 March 1999  相似文献   

Overview of the 1990–1995 eruption at Unzen Volcano     

Setsuya Nakada  Hiroshi Shimizu  Kazuya Ohta 《Journal of Volcanology and Geothermal Research》1999,89(1-4)

Following 198 years of dormancy, a small phreatic eruption started at the summit of Unzen Volcano (Mt. Fugen) in November 1990. A swarm of volcano-tectonic (VT) earthquakes had begun below the western flank of the volcano a year before this eruption, and isolated tremor occurred below the summit shortly before it. The focus of VT events had migrated eastward to the summit and became shallower. Following a period of phreatic activity, phreatomagmatic eruptions began in February 1991, became larger with time, and developed into a dacite dome eruption in May 1991 that lasted approximately 4 years. The emergence of the dome followed inflation, demagnetization and a swarm of high-frequency (HF) earthquakes in the crater area. After the dome appeared, activity of the VT earthquakes and the summit HF events was replaced largely by low-frequency (LF) earthquakes. Magma was discharged nearly continuously through the period of dome growth, and the rate decreased roughly with time. The lava dome grew in an unstable form on the shoulder of Mt. Fugen, with repeating partial collapses. The growth was exogenous when the lava effusion rate was high, and endogenous when low. A total of 13 lobes grew as a result of exogenous growth. Vigorous swarms of LF earthquakes occurred just prior to each lobe extrusion. Endogenous growth was accompanied by strong deformation of the crater floor and HF and LF earthquakes. By repeated exogenous and endogenous growth, a large dome was formed over the crater. Pyroclastic flows frequently descended to the northeast, east, and southeast, and their deposits extensively covered the eastern slope and flank of Mt. Fugen. Major pyroclastic flows took place when the lava effusion rate was high. Small vulcanian explosions were limited in the initial stage of dome growth. One of them occurred following collapse of the dome. The total volume of magma erupted was 2.1×10⁸ m³ (dense-rock-equivalent); about a half of this volume remained as a lava dome at the summit (1.2 km long, 0.8 km wide and 230–540 m high). The eruption finished with extrusion of a spine at the endogenous dome top. Several monitoring results convinced us that the eruption had come to an end: the minimal levels of both seismicity and rockfalls, no discharge of magma, the minimal SO₂ flux, and cessation of subsidence of the western flank of the volcano. The dome started slow deformation and cooling after the halt of magma effusion in February 1995.  相似文献   

River profile evolution by plucking in lithologically heterogeneous landscapes: Uniform uplift vs. tilting     

Emmanuel J. Gabet 《地球表面变化过程与地形》2020,45(7):1579-1588

Recent studies provide a theoretical framework for understanding the incision of bedrock rivers by plucking. These studies motivated the development of a numerical model that simulates plucking to explore the evolution of channel profiles in lithologically diverse terrain. In the main governing equation, the incision rate is calculated as a function of the difference between the boundary shear stress and a threshold shear stress needed to entrain blocks from the bed. Because an earlier study suggested that plucking is the primary incisional process in the northern Sierra Nevada (CA), the model was calibrated to approximate the conditions in the region. The profiles of the simulated rivers are stair-stepped, with sharp breaks-in-slope at lithological boundaries. This characteristic is common to rivers draining the northern Sierra Nevada, suggesting that the size of blocks available for plucking, as mediated by the fracture density, may be the primary control on their gradients. Moreover, the numerical experiments highlight the role of threshold shear stresses in the post-orogenic persistence of steep reaches and relict terrain. Finally, comparisons of profiles evolved under tilting or uniform uplift scenarios provide insights into how these different uplift modes affect profile evolution. For example, whereas uniform uplift generates a single migrating knickpoint at the range front, multiple migrating knickpoints can form simultaneously along a river in a tilting landscape. © 2020 John Wiley & Sons, Ltd.  相似文献   

井旁裂缝的双侧向测井物理模拟及特征分析          下载免费PDF全文

葛新民  范宜仁  李军  谭宝海  王磊  巫振观  王晓畅 《地球物理学报》2019,62(1):354-360

为深入认识裂缝性地层的双侧向测井响应特征,指导裂缝识别及裂缝参数表征,基于数值仿真开展了井旁裂缝的缩小比例物理模拟.在物理模拟平台构建的基础上,用不同浓度的氯化钠溶液模拟基岩,用不同宽度的镀锌板来模拟高导裂缝,实现测量过程的可视化.通过实验分析井旁裂缝的规模、发育位置和产状等因素对深、浅侧向电阻率的影响.研究表明:在仪器有效探测范围内,垂直缝延伸长度对深浅侧向电阻率的数值影响较小;裂缝离井壁越远,双侧向电阻率明显增大,但深浅侧向电阻率值的降低幅度不同;随着裂缝倾角增大,深侧向电阻率增大,浅侧向电阻率无明显变化,深浅侧向电阻率从负幅度差向正幅度差过渡,但临界角的观测十分困难,应用双侧向测井判断地层产状时,需特别注意其适用条件.  相似文献   

多组垂直裂缝诱导各向异性的HTI近似及其特征分析          下载免费PDF全文

张安家  王赟  孙鹏远  李添才 《地球物理学报》2019,62(5):1835-1848

在裂缝诱导各向异性理论研究中通常使用等效HTI介质来近似多组裂缝所引起的综合效应.由于构造运动的复杂性,多组裂缝普遍存在于地壳与油气储层中.为了研究多组裂缝的地震属性特征,分析常用的等效HTI模型对于多组裂缝近似精度及附加裂缝对介质属性特征的影响,本文利用线性滑移模型进行了多组垂直裂缝的单斜各向异性等效介质理论计算,并利用空间搜索方法求取与其最为接近的HTI介质各向异性弹性参数.重点研究了在两种各向异性介质中纵波速度、快慢横波速度和极化特征及其差异,量化分析附加裂缝对于地震属性如速度、极化方向和走时等的影响,研究对附加裂缝敏感的地震属性.此研究结果和方法为进一步研究多组裂缝的反演及识别方法提供基础,同时对于将高阶对称性各向异性介质中已存在的计算方法应用于低阶对称性时的适用程度、精度分析及相关方法研究具有重要作用.  相似文献   

STUDY OF THE LAVA FLOW HAZARD ZONING BASED ON THE KINEMATIC THERMO-RHEOLOGICAL MODEL:EXAMPLE STUDY FOR THE ASHIKULE VOLCANO,XINJIANG          下载免费PDF全文

PAN Bo  CHENG Tao  WAN Yuan  YU Hong-mei  XU Jian-dong 《地震地质》2017,39(4):721-734

The lava flow hazard is an important and frequent disaster for residents in the volcanic area. In this paper, we focus on the lava flow inundation hazard zoning based on the example case of the Ashikule volcano in Xinjiang, China. Firstly, the parameters of magma such as density, viscosity and temperature are calculated by the empirical formula of magma utilizing results of previous field geological survey and petrology analysis. Then, using the kinematic thermo-rheological model, we simulated the inundation area of lava flow from Ashi volcano at the effusion rates of 200m³/s and 500m³/s. The simulation results of Ashi volcano well coincide to the geological map and verify that the method and parameters are valid. Then the applied simulations were carried out to calculate the lava flow inundation area in future eruption at Ashi, Wuluke and Daheishan crater with different effusion rates. At last, according to the analysis of the applied simulation results and drawing lessons from the foreign disaster zoning method, the four-level hazard zoning was built and set with different colors. The first level with red color is the extra-dangerous zone that is always inundated in any eruption but only distributes near the lava spillway of the crater. The second level with orange color is the dangerous zone that is inundated in the medium scale eruption. The third level with yellow color is the sub-dangerous zone that is corresponding to the large eruption. The fourth level with blue color is the potential dangerous zone that is only inundated in the extra-large eruption. In addition, we put forward the suggestion to respond to and avoid the disaster in future. Although China has not been affected by the lava flow for nearly three hundred years, the prospective study in this paper will lay the foundation for the study of related disasters, and provide the reference for the major construction projects in the volcanic area.  相似文献   

The SPICE project: Calibrated cosmogenic 26Al production rates and cross-calibrated 26Al /10Be, 26Al/14C,and 26Al/21Ne ratios in quartz from the SP basalt flow,AZ, USA     

《Quaternary Geochronology》2022

  相似文献