泉州湾围海工程对海洋环境的影响   总被引：17，自引：3，他引：17  

陈彬  王金坑  张玉生  唐森铭  林景宏  郑凤武  张继伟 《台湾海峡》2004,23(2):192-198

采用现场调查资料与历史资料对比的方法,从海岸和海底地貌、水环境质量、海洋生物种类和群落结构等几方面分析了近几十年来福建泉州湾围海工程的环境效应.结果表明,围海工程促进了海滩的淤浅,减小了内湾的纳潮量和环境容量,使得泉州湾内湾水质恶化;其最终后果为围海工程附近海区生物种类多样性普遍降低,优势种和群落结构发生改变.  相似文献   

区域海洋地质数据库建设纲要   总被引：5，自引：0，他引：5  

魏合龙  戴勤奋  林峰  王圣洁  何书锋  苏国辉 《海洋地质与第四纪地质》2004,24(1):139-142

区域海洋地质数据库是中国地质调查局基础数据库的一个重要组成部分，是实现地质调查基础性与公益性战略部署的依托。根据区域海洋地质数据库建设的目标与任务，在数据结构和实施步骤等方面进行了初步研究。区域海洋地质数据库及其管理信息系统适合采取基于Web系统的三层体系结构，在数据构成上亦分为区域海洋地质调查原始资料与成果资料，其中元数据库的建设对数据库的应用非常重要，用户可以通过元数据了解数据的存在性、适宜性、有效性等，确定数据的使用方法，因此，元数据库的建设应采用国际已经普遍认可的ISO/TC211发布的ISO19115空间元数据标准。  相似文献   

动力定位系统与单波束测深仪在科考船定点作业中的应用     

张彬彬  张道建  张海泉  刘凯  张学贤  卢永平 《海洋通报》2020,39(6):651-656

科考船定点作业时会受到海洋风、涌、浪、流等外界环境因素影响，导致工作效率降低，原位测量精度下降，甚至影响作业安全。动力定位系统 （DP） 具有自动定位功能，能够抵抗外界环境因素的影响，可实现科考船高精度定点控位。 单波束测深仪不仅可以测量水深，也可反映水下设备深度信息，可以起到辅助监控水下设备功能。本文在介绍定点作业施工现状与局限性的基础上，分析 DP 系统与单波束测深仪工作原理，以“向阳红 01”船为载体，在定点作业时开启 DP 系统与单波束测深仪，发现该方法可以提高科考船定点作业工作效率、原位测量精度并保障作业安全，可为其他科考船定点作业提供参考。  相似文献   

Effort distribution and catch patterns adjacent to temperate MPAs   总被引：7，自引：2，他引：7  

Murawski  Steven A.; Wigley  Susan E.; Fogarty  Michael J.; Rago  Paul J.; Mountain  David G. 《ICES Journal of Marine Science》2005,62(6):1150-1167

  相似文献   

南黄海及相邻陆区松散沉积层磁性地层的研究     

周墨清  葛宗诗 《海洋地质与第四纪地质》1990,(4)

本文通过研究区5个钻孔松散沉积岩心磁性地层的划分对比,获知布容与松山极性带的界线,南黄海和陆区北部位于80.0—99.5m。陆区的南部此界线于270.4m深处。松山和高斯极性带的界线,海区未揭露到,其沉积起始时间都小于1.7Ma。而陆区的南、北部分别位于117m和328.2m。高斯和吉尔伯特极性带的界线,陆区北部为140m,而南部区为460.15m。沉积起始时间为3.4Ma。吉尔伯特底界仅北部陆区所揭示,为190.5m。松散沉积层与下伏白垩纪(?)石灰岩接触面位于400.35m,沉积起始时间约17.0Ma。  相似文献   

城市建设中的地震小区划与浅层地震探测     

薛荣俊  辛柏森  杨和乃 《中国海洋大学学报(自然科学版)》1993,(Z1)

简要阐述地震小区划在现代城市建设中的重要性以及在实施地震小区划的研究中浅层地震探测的重要作用及其方法原理,并给出应用浅层地震探测在城市地震小区划中的实例。  相似文献   

Addressing ecosystem effects of fishing using marine protected areas   总被引：5，自引：1，他引：5  

Sumaila  Ussif Rashid; Guenette  Sylvie; Alder  Jackie; Chuenpagdee  Ratana 《ICES Journal of Marine Science》2000,57(3):752-760

  相似文献   

南海北部含油气构造上方化探异常研究     

陈汉宗  周蒂  王平 《热带海洋学报》1997,(3)

在南海北部利用地球化学方法作为油气勘探的一种辅助手段。在6个航次中采集了沉积物、底层海水及海面大气样品，测定了近50种化探指标，并采用稳健统计方法进行了数据处理和异常圈定。化探结果在油气藏上方发现了清晰的、具不同指标组合的综合化探异常，与邻近空构造形成鲜明的对照。圈闭顶部的块状异常和圈闭周绿的环状、半环状异常是下伏油气藏的良好指示，而剖面上呈锯齿状、平面上呈线状的异常则与断裂带有关。实践表明，建立已知油气藏上方的化探异常模式及解剖已知空构造上方的地球化学特征对于指导本区或邻区的化探异常评价是十分必要的。  相似文献   

Comparison of Strain-rate Dependent Stress-Strain Behavior from Ko-consolidated Compression and Extension Tests on Natural Hong Kong Marine Deposits     

Jian-Hua Yin  Chun-Man Cheng 《Marine Georesources & Geotechnology》2006,24(2):119-147

This article presents results from a series of K_o-consolidated compression and extension triaxial tests on specimens from undisturbed samples of Hong Kong Marine Deposits (HKMD). To investigate the strain-rate effects, a total of seven K_o-consolidated triaxial tests were conducted including four compression tests and three extension tests. After K_o-consolidation, the triaxial test specimens were sheared at step-changed axial strain rates under three different confining pressures of 50 kPa, 150 kPa, and 400 kPa, respectively. The step-changed strain rates were applied in the following order: +2%/h, +0.2%/h, +20%/h, -2%/h (unloading) and +2%/h (reloading) for the four compression tests and -2%/h, -0.2%/h, -20%/h, +2%/h (unloading) and -2%/h (reloading) for the three extension tests. The results are reported and analyzed in the paper. The results show that the strain rate effects, the stress-strain characteristics, and the effective stress paths of the specimens for tests in a compression state are different from those for tests in an extension stage. One order of magnitude increase in axial strain rate causes an average 8.6% increase in undrained shear strength for compression tests and a 12.1% increase for extension tests. It is also found that the failure mode of the specimens in compression is different from that in extension. The stress-strain behavior of specimens shows strain-softening and a clear shear band in compression tests, but strain-hardening without any clear shear band in extension tests for the same absolute value of axial strain.  相似文献   

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin   总被引：1，自引：1，他引：1  

Michael Riedel 《Marine Geophysical Researches》2007,28(4):355-371

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.  相似文献